From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Tue, 6 May 2014 02:14:09 +0200 Subject: [PATCH v3 14/20] xhci-platform: Add a new controller using xHCI: Armada 375 In-Reply-To: <1399335255-589-1-git-send-email-gregory.clement@free-electrons.com> References: <1399335255-589-1-git-send-email-gregory.clement@free-electrons.com> Message-ID: <1399335255-589-15-git-send-email-gregory.clement@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Extend the compatible string list with armada-375-xhci. It is used to describe xHCI controller which is in the Armada 375 SoC. Signed-off-by: Gregory CLEMENT --- Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index a0915941fc25..5eafa9a4e136 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -2,7 +2,8 @@ USB xHCI controllers Required properties: - compatible: should be one of "generic-xhci", - "marvell,armada-380-xhci" (deprecated: "xhci-platform"). + "marvell,armada-375-xhci", "marvell,armada-380-xhci" (deprecated: + "xhci-platform"). - reg: should contain address and length of the standard XHCI register set for the device. - interrupts: one XHCI interrupt should be described here. -- 1.8.1.2