From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Tue, 6 May 2014 02:14:02 +0200 Subject: [PATCH v3 07/20] xhci-platform: Add a new controller using xhci: Armada 38x In-Reply-To: <1399335255-589-1-git-send-email-gregory.clement@free-electrons.com> References: <1399335255-589-1-git-send-email-gregory.clement@free-electrons.com> Message-ID: <1399335255-589-8-git-send-email-gregory.clement@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Extend the compatible string list with armada-380-xhci. It is used to describe xhci controller which is in the Armada 38x SoCs. Signed-off-by: Gregory CLEMENT --- Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 90f8f607d125..a0915941fc25 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -1,7 +1,8 @@ USB xHCI controllers Required properties: - - compatible: should be "generic-xhci" (deprecated: "xhci-platform"). + - compatible: should be one of "generic-xhci", + "marvell,armada-380-xhci" (deprecated: "xhci-platform"). - reg: should contain address and length of the standard XHCI register set for the device. - interrupts: one XHCI interrupt should be described here. -- 1.8.1.2