From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/6] ARM: dts: Karo TX25: Add pinctrl nodes
Date: Wed, 7 May 2014 15:31:27 +0200 [thread overview]
Message-ID: <1399469489-22788-5-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1399469489-22788-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boot/dts/imx25-karo-tx25.dts | 53 +++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
index f8db366..aeb1fce 100644
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -21,16 +21,69 @@
};
};
+&iomuxc {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+ MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
+ MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
+ MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX25_PAD_D11__GPIO_4_9 0x80000000 /* FEC PHY power on pin */
+ MX25_PAD_D13__GPIO_4_7 0x80000000 /* FEC reset */
+ MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX25_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX25_PAD_NF_CE0__NF_CE0 0x80000000
+ MX25_PAD_NFWE_B__NFWE_B 0x80000000
+ MX25_PAD_NFRE_B__NFRE_B 0x80000000
+ MX25_PAD_NFALE__NFALE 0x80000000
+ MX25_PAD_NFCLE__NFCLE 0x80000000
+ MX25_PAD_NFWP_B__NFWP_B 0x80000000
+ MX25_PAD_NFRB__NFRB 0x80000000
+ MX25_PAD_D7__D7 0x80000000
+ MX25_PAD_D6__D6 0x80000000
+ MX25_PAD_D5__D5 0x80000000
+ MX25_PAD_D4__D4 0x80000000
+ MX25_PAD_D3__D3 0x80000000
+ MX25_PAD_D2__D2 0x80000000
+ MX25_PAD_D1__D1 0x80000000
+ MX25_PAD_D0__D0 0x80000000
+ >;
+ };
+};
+
&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
status = "okay";
};
&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
nand-on-flash-bbt;
status = "okay";
};
--
2.0.0.rc0
next prev parent reply other threads:[~2014-05-07 13:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-07 13:31 [PATCH] i.MX25 dts updates Sascha Hauer
2014-05-07 13:31 ` [PATCH 1/6] ARM: dts: i.MX25: Add mmc aliases Sascha Hauer
2014-05-07 14:46 ` Fabio Estevam
2014-05-08 8:04 ` Sascha Hauer
2014-05-08 8:24 ` Shawn Guo
2014-05-07 13:31 ` [PATCH 2/6] ARM: dts: i.MX25: remove disabled property of usbmisc unit Sascha Hauer
2014-05-07 13:31 ` [PATCH 3/6] ARM: dts: i.MX25: Add IRAM node Sascha Hauer
2014-05-07 13:31 ` Sascha Hauer [this message]
2014-05-07 13:31 ` [PATCH 5/6] ARM: dts: Karo TX25: Add phy reset gpio and supply for FEC Sascha Hauer
2014-05-08 12:27 ` Lothar Waßmann
2014-05-09 6:11 ` Sascha Hauer
2014-05-07 13:31 ` [PATCH 6/6] ARM: dts: Karo TX25: use hardware ecc Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2014-05-09 6:11 [PATCH v2] i.MX25 dts updates Sascha Hauer
2014-05-09 6:11 ` [PATCH 4/6] ARM: dts: Karo TX25: Add pinctrl nodes Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399469489-22788-5-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).