From: l.stach@pengutronix.de (Lucas Stach)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: imx6: edmqmx6: add SPI bus and flash
Date: Wed, 7 May 2014 20:09:05 +0200 [thread overview]
Message-ID: <1399486145-24913-2-git-send-email-l.stach@pengutronix.de> (raw)
In-Reply-To: <1399486145-24913-1-git-send-email-l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index be5de70fe86a..58791d0eaaf8 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -91,6 +91,20 @@
};
};
+&ecspi5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi5>;
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio1 12 0>;
+ status = "okay";
+
+ flash: m25p80 at 0 {
+ compatible = "m25p80";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
@@ -264,6 +278,15 @@
>;
};
+ pinctrl_ecspi5: ecspi5rp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
+ MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
+ MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
--
2.0.0.rc0
next prev parent reply other threads:[~2014-05-07 18:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-07 18:09 [PATCH 1/2] ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio Lucas Stach
2014-05-07 18:09 ` Lucas Stach [this message]
2014-05-08 3:43 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399486145-24913-2-git-send-email-l.stach@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox