From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni) Date: Sun, 11 May 2014 20:17:59 +0200 Subject: [PATCHv5 11/20] Documentation: dt-bindings: document the Armada 375 USB cluster binding In-Reply-To: <1399832288-19899-1-git-send-email-thomas.petazzoni@free-electrons.com> References: <1399832288-19899-1-git-send-email-thomas.petazzoni@free-electrons.com> Message-ID: <1399832288-19899-12-git-send-email-thomas.petazzoni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Gregory CLEMENT Armada 375 comes with an USB2 host and device controller and an USB3 controller. The USB cluster control register allows to manage common features of both USB controllers. This commit adds the Device Tree binding documentation for this piece of hardware. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni --- .../bindings/phy/armada-375-usb-phy-cluster.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/armada-375-usb-phy-cluster.txt diff --git a/Documentation/devicetree/bindings/phy/armada-375-usb-phy-cluster.txt b/Documentation/devicetree/bindings/phy/armada-375-usb-phy-cluster.txt new file mode 100644 index 0000000..258407c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/armada-375-usb-phy-cluster.txt @@ -0,0 +1,19 @@ +Armada 375 USB cluster +---------------------- + +Armada 375 comes with an USB2 host and device controller and an USB3 +controller. The USB cluster control register allows to manage common +features of both USB controllers. + +Required properties: + +- compatible: "marvell,armada-375-usb-cluster" +- reg: Should contain usb cluster register location and length. +- #phy-cells : from the generic phy bindings, must be 1 + +Example: + usbcluster: usb-cluster at 18400 { + compatible = "marvell,armada-375-usb-cluster"; + reg = <0x18400 0x4>; + #phy-cells = <1> + }; -- 1.9.2