* [PATCH 0/6] ARM: imx: add initial i.MX6 SoloX support
@ 2014-05-13 14:12 Shawn Guo
2014-05-13 14:12 ` [PATCH 1/6] ARM: imx: add low-level debug support for imx6sx Shawn Guo
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Shawn Guo @ 2014-05-13 14:12 UTC (permalink / raw)
To: linux-arm-kernel
The series adds the initial support for i.MX6 SoloX, which is the newest
addition to i.MX6 family SoCs. It integrates one Cortex-A9 and one
Cortex-M4, and features dual-port gigabit Ethernet audio video
bridging (AVB) for quality-of-service in automotive and other
applications with enhanced traffic shaping and packet prioritization.
More details can be found in page below.
http://media.freescale.com/phoenix.zhtml?c=196520&p=irol-newsArticle&ID=1917475&highlight
Shawn
Anson Huang (1):
ARM: imx: add clock driver for imx6sx
Shawn Guo (5):
ARM: imx: add low-level debug support for imx6sx
ARM: imx: add basic imx6sx SoC support
ARM: dts: imx: add pin function header for imx6sx
ARM: dts: imx: add initial imx6sx device tree source
ARM: dts: imx: add initial imx6sx-sdb board support
.../devicetree/bindings/clock/imx6sx-clock.txt | 13 +
arch/arm/Kconfig.debug | 13 +-
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sx-pinfunc.h | 1544 ++++++++++++++++++++
arch/arm/boot/dts/imx6sx-sdb.dts | 210 +++
arch/arm/boot/dts/imx6sx.dtsi | 1202 +++++++++++++++
arch/arm/include/debug/imx-uart.h | 11 +
arch/arm/mach-imx/Kconfig | 8 +
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/clk-imx6sx.c | 524 +++++++
arch/arm/mach-imx/cpu.c | 3 +
arch/arm/mach-imx/mach-imx6sx.c | 51 +
arch/arm/mach-imx/mxc.h | 6 +
include/dt-bindings/clock/imx6sx-clock.h | 256 ++++
14 files changed, 3841 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/imx6sx-clock.txt
create mode 100755 arch/arm/boot/dts/imx6sx-pinfunc.h
create mode 100644 arch/arm/boot/dts/imx6sx-sdb.dts
create mode 100644 arch/arm/boot/dts/imx6sx.dtsi
create mode 100644 arch/arm/mach-imx/clk-imx6sx.c
create mode 100644 arch/arm/mach-imx/mach-imx6sx.c
create mode 100644 include/dt-bindings/clock/imx6sx-clock.h
--
1.8.3.2
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/6] ARM: imx: add low-level debug support for imx6sx
2014-05-13 14:12 [PATCH 0/6] ARM: imx: add initial i.MX6 SoloX support Shawn Guo
@ 2014-05-13 14:12 ` Shawn Guo
2014-05-13 14:12 ` [PATCH 2/6] ARM: imx: add clock driver " Shawn Guo
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2014-05-13 14:12 UTC (permalink / raw)
To: linux-arm-kernel
Enable low-level debug support for i.MX6 SoloX by adding the debug
port definitions for the SoC.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
---
arch/arm/Kconfig.debug | 13 +++++++++++--
arch/arm/include/debug/imx-uart.h | 11 +++++++++++
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 00c6950..4dd565f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -317,6 +317,13 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX6SL.
+ config DEBUG_IMX6SX_UART
+ bool "i.MX6SX Debug UART"
+ depends on SOC_IMX6SX
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6SX.
+
config DEBUG_KEYSTONE_UART0
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
depends on ARCH_KEYSTONE
@@ -935,7 +942,8 @@ config DEBUG_IMX_UART_PORT
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
- DEBUG_IMX6SL_UART
+ DEBUG_IMX6SL_UART || \
+ DEBUG_IMX6SX_UART
default 1
depends on ARCH_MXC
help
@@ -979,7 +987,8 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART || \
- DEBUG_IMX6SL_UART
+ DEBUG_IMX6SL_UART || \
+ DEBUG_IMX6SX_UART
default "debug/msm.S" if DEBUG_MSM_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index 42b823c..032a316 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -81,6 +81,15 @@
#define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR
#define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n)
+#define IMX6SX_UART1_BASE_ADDR 0x02020000
+#define IMX6SX_UART2_BASE_ADDR 0x021e8000
+#define IMX6SX_UART3_BASE_ADDR 0x021ec000
+#define IMX6SX_UART4_BASE_ADDR 0x021f0000
+#define IMX6SX_UART5_BASE_ADDR 0x021f4000
+#define IMX6SX_UART6_BASE_ADDR 0x022a0000
+#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR
+#define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n)
+
#define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)
#ifdef CONFIG_DEBUG_IMX1_UART
@@ -103,6 +112,8 @@
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q)
#elif defined(CONFIG_DEBUG_IMX6SL_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL)
+#elif defined(CONFIG_DEBUG_IMX6SX_UART)
+#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX)
#endif
#endif /* __DEBUG_IMX_UART_H */
--
1.8.3.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/6] ARM: imx: add clock driver for imx6sx
2014-05-13 14:12 [PATCH 0/6] ARM: imx: add initial i.MX6 SoloX support Shawn Guo
2014-05-13 14:12 ` [PATCH 1/6] ARM: imx: add low-level debug support for imx6sx Shawn Guo
@ 2014-05-13 14:12 ` Shawn Guo
2014-05-13 14:12 ` [PATCH 3/6] ARM: imx: add basic imx6sx SoC support Shawn Guo
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2014-05-13 14:12 UTC (permalink / raw)
To: linux-arm-kernel
From: Anson Huang <b20788@freescale.com>
Add clock driver for i.MX6 SoloX SoC.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
---
.../devicetree/bindings/clock/imx6sx-clock.txt | 13 +
arch/arm/mach-imx/clk-imx6sx.c | 524 +++++++++++++++++++++
include/dt-bindings/clock/imx6sx-clock.h | 256 ++++++++++
3 files changed, 793 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/imx6sx-clock.txt
create mode 100644 arch/arm/mach-imx/clk-imx6sx.c
create mode 100644 include/dt-bindings/clock/imx6sx-clock.h
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt b/Documentation/devicetree/bindings/clock/imx6sx-clock.txt
new file mode 100644
index 0000000..22362b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.txt
@@ -0,0 +1,13 @@
+* Clock bindings for Freescale i.MX6 SoloX
+
+Required properties:
+- compatible: Should be "fsl,imx6sx-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sx-clock.h
+for the full list of i.MX6 SoloX clock IDs.
diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c
new file mode 100644
index 0000000..72f8902
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx6sx.c
@@ -0,0 +1,524 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/types.h>
+
+#include "clk.h"
+#include "common.h"
+
+#define CCDR 0x4
+#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16)
+
+static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
+static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
+static const char *ocram_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
+static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
+static const char *gpu_axi_sels[] = { "pll2_pfd2_396m", "pll3_pfd0_720m", "pll3_pfd1_540m", "pll2_bus", };
+static const char *gpu_core_sels[] = { "pll3_pfd1_540m", "pll3_pfd0_720m", "pll2_bus", "pll2_pfd2_396m", };
+static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", };
+static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", };
+static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", };
+static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *pcie_axi_sels[] = { "axi", "ahb", };
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", };
+static const char *qspi1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
+static const char *perclk_sels[] = { "ipg", "osc", };
+static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *vid_sels[] = { "pll3_pfd1_540m", "pll3_usb_otg", "pll3_pfd3_454m", "pll4_audio_div", "pll5_video_div", };
+static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", "dummy", };
+static const char *uart_sels[] = { "pll3_80m", "osc", };
+static const char *qspi2_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", };
+static const char *enet_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
+static const char *enet_sels[] = { "enet_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *m4_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "osc", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd3_454m", };
+static const char *m4_sels[] = { "m4_pre_sel", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *eim_slow_sels[] = { "ocram", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *ecspi_sels[] = { "pll3_60m", "osc", };
+static const char *lcdif1_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", };
+static const char *lcdif1_sels[] = { "lcdif1_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *lcdif2_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd3_594m", "pll3_pfd1_540m", };
+static const char *lcdif2_sels[] = { "lcdif2_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
+static const char *display_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll3_usb_otg", "pll3_pfd1_540m", };
+static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
+static const char *cko1_sels[] = {
+ "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
+ "dummy", "ocram", "dummy", "pxp_axi", "epdc_axi", "lcdif_pix",
+ "epdc_pix", "ahb", "ipg", "perclk", "ckil", "pll4_audio_div",
+};
+static const char *cko2_sels[] = {
+ "dummy", "mmdc_p0_fast", "usdhc4", "usdhc1", "dummy", "wrck",
+ "ecspi_root", "dummy", "usdhc3", "pcie", "arm", "csi_core",
+ "lcdif_axi", "dummy", "osc", "dummy", "gpu2d_ovg_core",
+ "usdhc2", "ssi1", "ssi2", "ssi3", "gpu2d_core", "dummy",
+ "dummy", "dummy", "dummy", "esai_extal", "eim_slow", "uart_serial",
+ "spdif", "asrc", "dummy",
+};
+static const char *cko_sels[] = { "cko1", "cko2", };
+static const char *lvds_sels[] = {
+ "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div",
+ "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2",
+};
+
+static struct clk *clks[IMX6SX_CLK_CLK_END];
+static struct clk_onecell_data clk_data;
+
+static int const clks_init_on[] __initconst = {
+ IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3,
+ IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3,
+ IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG,
+ IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM,
+ IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_M4,
+ IMX6SX_CLK_QSPI1, IMX6SX_CLK_QSPI2, IMX6SX_CLK_UART_IPG,
+ IMX6SX_CLK_UART_SERIAL, IMX6SX_CLK_I2C3, IMX6SX_CLK_ECSPI5,
+ IMX6SX_CLK_CAN1_IPG, IMX6SX_CLK_CAN1_SERIAL, IMX6SX_CLK_CAN2_IPG,
+ IMX6SX_CLK_CAN2_SERIAL, IMX6SX_CLK_CANFD, IMX6SX_CLK_EPIT1,
+ IMX6SX_CLK_EPIT2,
+};
+
+static struct clk_div_table clk_enet_ref_table[] = {
+ { .val = 0, .div = 20, },
+ { .val = 1, .div = 10, },
+ { .val = 2, .div = 5, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
+static struct clk_div_table post_div_table[] = {
+ { .val = 2, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 0, .div = 4, },
+ { }
+};
+
+static struct clk_div_table video_div_table[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 2, .div = 1, },
+ { .val = 3, .div = 4, },
+ { }
+};
+
+static u32 share_count_asrc;
+static u32 share_count_audio;
+static u32 share_count_esai;
+
+static void __init imx6sx_clocks_init(struct device_node *ccm_node)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int i;
+
+ clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+
+ clks[IMX6SX_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
+ clks[IMX6SX_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc");
+
+ /* ipp_di clock is external input */
+ clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0");
+ clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1");
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ /* type name parent_name base div_mask */
+ clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f);
+ clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1);
+ clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3);
+ clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f);
+ clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f);
+ clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3);
+ clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3);
+
+ /*
+ * Bit 20 is the reserved and read-only bit, we do this only for:
+ * - Do nothing for usbphy clk_enable/disable
+ * - Keep refcount when do usbphy clk_enable/disable, in that case,
+ * the clk framework may need to enable/disable usbphy's parent
+ */
+ clks[IMX6SX_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+ clks[IMX6SX_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+ /*
+ * usbphy*_gate needs to be on after system boots up, and software
+ * never needs to control it anymore.
+ */
+ clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+ clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
+
+ /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */
+ clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5);
+ clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
+
+ clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate("lvds1_out", "lvds1_sel", base + 0x160, 10);
+
+ clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+ base + 0xe0, 0, 2, 0, clk_enet_ref_table,
+ &imx_ccm_lock);
+ clks[IMX6SX_CLK_ENET2_REF] = clk_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0,
+ base + 0xe0, 2, 2, 0, clk_enet_ref_table,
+ &imx_ccm_lock);
+ clks[IMX6SX_CLK_ENET2_REF_125M] = imx_clk_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20);
+
+ clks[IMX6SX_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
+ clks[IMX6SX_CLK_ENET_PTP] = imx_clk_gate("enet_ptp_25m", "enet_ptp_ref", base + 0xe0, 21);
+
+ /* name parent_name reg idx */
+ clks[IMX6SX_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
+ clks[IMX6SX_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
+ clks[IMX6SX_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
+ clks[IMX6SX_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3);
+ clks[IMX6SX_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
+ clks[IMX6SX_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
+ clks[IMX6SX_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
+ clks[IMX6SX_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
+
+ /* name parent_name mult div */
+ clks[IMX6SX_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+ clks[IMX6SX_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clks[IMX6SX_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clks[IMX6SX_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clks[IMX6SX_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+ clks[IMX6SX_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
+
+ clks[IMX6SX_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
+ CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div",
+ CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video",
+ CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+ clks[IMX6SX_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div",
+ CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
+ /* name reg shift width parent_names num_parents */
+ clks[IMX6SX_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+
+ np = ccm_node;
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ imx6q_pm_set_ccm_base(base);
+
+ /* name reg shift width parent_names num_parents */
+ clks[IMX6SX_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clks[IMX6SX_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clks[IMX6SX_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 2, ocram_sels, ARRAY_SIZE(ocram_sels));
+ clks[IMX6SX_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clks[IMX6SX_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
+ clks[IMX6SX_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clks[IMX6SX_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
+ clks[IMX6SX_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
+ clks[IMX6SX_CLK_GPU_AXI_SEL] = imx_clk_mux("gpu_axi_sel", base + 0x18, 8, 2, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clks[IMX6SX_CLK_GPU_CORE_SEL] = imx_clk_mux("gpu_core_sel", base + 0x18, 4, 2, gpu_core_sels, ARRAY_SIZE(gpu_core_sels));
+ clks[IMX6SX_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
+ clks[IMX6SX_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clks[IMX6SX_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clks[IMX6SX_CLK_QSPI1_SEL] = imx_clk_mux_flags("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
+ clks[IMX6SX_CLK_VID_SEL] = imx_clk_mux("vid_sel", base + 0x20, 21, 3, vid_sels, ARRAY_SIZE(vid_sels));
+ clks[IMX6SX_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
+ clks[IMX6SX_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
+ clks[IMX6SX_CLK_QSPI2_SEL] = imx_clk_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_AUDIO_SEL] = imx_clk_mux("audio_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clks[IMX6SX_CLK_ENET_PRE_SEL] = imx_clk_mux("enet_pre_sel", base + 0x34, 15, 3, enet_pre_sels, ARRAY_SIZE(enet_pre_sels));
+ clks[IMX6SX_CLK_ENET_SEL] = imx_clk_mux("enet_sel", base + 0x34, 9, 3, enet_sels, ARRAY_SIZE(enet_sels));
+ clks[IMX6SX_CLK_M4_PRE_SEL] = imx_clk_mux("m4_pre_sel", base + 0x34, 6, 3, m4_pre_sels, ARRAY_SIZE(m4_pre_sels));
+ clks[IMX6SX_CLK_M4_SEL] = imx_clk_mux("m4_sel", base + 0x34, 0, 3, m4_sels, ARRAY_SIZE(m4_sels));
+ clks[IMX6SX_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
+ clks[IMX6SX_CLK_LCDIF2_PRE_SEL] = imx_clk_mux("lcdif2_pre_sel", base + 0x38, 6, 3, lcdif2_pre_sels, ARRAY_SIZE(lcdif2_pre_sels));
+ clks[IMX6SX_CLK_LCDIF2_SEL] = imx_clk_mux("lcdif2_sel", base + 0x38, 0, 3, lcdif2_sels, ARRAY_SIZE(lcdif2_sels));
+ clks[IMX6SX_CLK_DISPLAY_SEL] = imx_clk_mux("display_sel", base + 0x3c, 14, 2, display_sels, ARRAY_SIZE(display_sels));
+ clks[IMX6SX_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
+ clks[IMX6SX_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+ clks[IMX6SX_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
+ clks[IMX6SX_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
+
+ clks[IMX6SX_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux_flags("ldb_di1_div_sel", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux_flags("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LCDIF1_PRE_SEL] = imx_clk_mux_flags("lcdif1_pre_sel", base + 0x38, 15, 3, lcdif1_pre_sels, ARRAY_SIZE(lcdif1_pre_sels), CLK_SET_RATE_PARENT);
+ clks[IMX6SX_CLK_LCDIF1_SEL] = imx_clk_mux_flags("lcdif1_sel", base + 0x38, 9, 3, lcdif1_sels, ARRAY_SIZE(lcdif1_sels), CLK_SET_RATE_PARENT);
+
+ /* name parent_name reg shift width */
+ clks[IMX6SX_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clks[IMX6SX_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clks[IMX6SX_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clks[IMX6SX_CLK_GPU_CORE_PODF] = imx_clk_divider("gpu_core_podf", "gpu_core_sel", base + 0x18, 29, 3);
+ clks[IMX6SX_CLK_GPU_AXI_PODF] = imx_clk_divider("gpu_axi_podf", "gpu_axi_sel", base + 0x18, 26, 3);
+ clks[IMX6SX_CLK_LCDIF1_PODF] = imx_clk_divider("lcdif1_podf", "lcdif1_pred", base + 0x18, 23, 3);
+ clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
+ clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3);
+ clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3);
+ clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6);
+ clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2);
+ clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6);
+ clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clks[IMX6SX_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clks[IMX6SX_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clks[IMX6SX_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clks[IMX6SX_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6);
+ clks[IMX6SX_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clks[IMX6SX_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ clks[IMX6SX_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clks[IMX6SX_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clks[IMX6SX_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clks[IMX6SX_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clks[IMX6SX_CLK_QSPI2_PRED] = imx_clk_divider("qspi2_pred", "qspi2_sel", base + 0x2c, 18, 3);
+ clks[IMX6SX_CLK_QSPI2_PODF] = imx_clk_divider("qspi2_podf", "qspi2_pred", base + 0x2c, 21, 6);
+ clks[IMX6SX_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clks[IMX6SX_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clks[IMX6SX_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
+ clks[IMX6SX_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
+ clks[IMX6SX_CLK_AUDIO_PRED] = imx_clk_divider("audio_pred", "audio_sel", base + 0x30, 12, 3);
+ clks[IMX6SX_CLK_AUDIO_PODF] = imx_clk_divider("audio_podf", "audio_pred", base + 0x30, 9, 3);
+ clks[IMX6SX_CLK_ENET_PODF] = imx_clk_divider("enet_podf", "enet_pre_sel", base + 0x34, 12, 3);
+ clks[IMX6SX_CLK_M4_PODF] = imx_clk_divider("m4_podf", "m4_sel", base + 0x34, 3, 3);
+ clks[IMX6SX_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6);
+ clks[IMX6SX_CLK_LCDIF1_PRED] = imx_clk_divider("lcdif1_pred", "lcdif1_pre_sel", base + 0x38, 12, 3);
+ clks[IMX6SX_CLK_LCDIF2_PRED] = imx_clk_divider("lcdif2_pred", "lcdif2_pre_sel", base + 0x38, 3, 3);
+ clks[IMX6SX_CLK_DISPLAY_PODF] = imx_clk_divider("display_podf", "display_sel", base + 0x3c, 16, 3);
+ clks[IMX6SX_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
+ clks[IMX6SX_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+ clks[IMX6SX_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
+
+ clks[IMX6SX_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clks[IMX6SX_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7);
+ clks[IMX6SX_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clks[IMX6SX_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7);
+
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clks[IMX6SX_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clks[IMX6SX_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+ /* name parent_name reg shift width busy: reg, shift */
+ clks[IMX6SX_CLK_OCRAM_PODF] = imx_clk_busy_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3, base + 0x48, 0);
+ clks[IMX6SX_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+ clks[IMX6SX_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clks[IMX6SX_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+
+ /* name parent_name reg shift */
+ /* CCGR0 */
+ clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0);
+ clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2);
+ clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4);
+ clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
+ clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
+ clks[IMX6SX_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8);
+ clks[IMX6SX_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10);
+ clks[IMX6SX_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12);
+ clks[IMX6SX_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
+ clks[IMX6SX_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16);
+ clks[IMX6SX_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
+ clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20);
+ clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24);
+ clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26);
+ clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30);
+
+ /* CCGR1 */
+ clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
+ clks[IMX6SX_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2);
+ clks[IMX6SX_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4);
+ clks[IMX6SX_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6);
+ clks[IMX6SX_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_podf", base + 0x6c, 8);
+ clks[IMX6SX_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12);
+ clks[IMX6SX_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14);
+ clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai);
+ clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18);
+ clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20);
+ clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22);
+ clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26);
+ clks[IMX6SX_CLK_CANFD] = imx_clk_gate2("canfd", "can_podf", base + 0x6c, 30);
+
+ /* CCGR2 */
+ clks[IMX6SX_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2);
+ clks[IMX6SX_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
+ clks[IMX6SX_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
+ clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
+ clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
+ clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14);
+ clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16);
+ clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18);
+ clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20);
+ clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22);
+ clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28);
+ clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30);
+
+ /* CCGR3 */
+ clks[IMX6SX_CLK_M4] = imx_clk_gate2("m4", "m4_podf", base + 0x74, 2);
+ clks[IMX6SX_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4);
+ clks[IMX6SX_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "enet_sel", base + 0x74, 4);
+ clks[IMX6SX_CLK_DISPLAY_AXI] = imx_clk_gate2("display_axi", "display_podf", base + 0x74, 6);
+ clks[IMX6SX_CLK_LCDIF2_PIX] = imx_clk_gate2("lcdif2_pix", "lcdif2_sel", base + 0x74, 8);
+ clks[IMX6SX_CLK_LCDIF1_PIX] = imx_clk_gate2("lcdif1_pix", "lcdif1_sel", base + 0x74, 10);
+ clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12);
+ clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14);
+ clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18);
+ clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20);
+ clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24);
+ clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28);
+
+ /* CCGR4 */
+ clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0);
+ clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10);
+ clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12);
+ clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14);
+ clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16);
+ clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18);
+ clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20);
+ clks[IMX6SX_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22);
+ clks[IMX6SX_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
+ clks[IMX6SX_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
+ clks[IMX6SX_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "qspi2_podf", base + 0x78, 28);
+ clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+
+ /* CCGR5 */
+ clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
+ clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
+ clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio);
+ clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
+ clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
+ clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
+ clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
+ clks[IMX6SX_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18);
+ clks[IMX6SX_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20);
+ clks[IMX6SX_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22);
+ clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
+ clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26);
+ clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28);
+ clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2("sai2_ipg", "ipg", base + 0x7c, 30);
+ clks[IMX6SX_CLK_SAI1] = imx_clk_gate2("sai1", "ssi1_podf", base + 0x7c, 28);
+ clks[IMX6SX_CLK_SAI2] = imx_clk_gate2("sai2", "ssi2_podf", base + 0x7c, 30);
+
+ /* CCGR6 */
+ clks[IMX6SX_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clks[IMX6SX_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clks[IMX6SX_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clks[IMX6SX_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clks[IMX6SX_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+ clks[IMX6SX_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10);
+ clks[IMX6SX_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16);
+ clks[IMX6SX_CLK_VADC] = imx_clk_gate2("vadc", "vid_podf", base + 0x80, 20);
+ clks[IMX6SX_CLK_GIS] = imx_clk_gate2("gis", "display_podf", base + 0x80, 22);
+ clks[IMX6SX_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24);
+ clks[IMX6SX_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26);
+ clks[IMX6SX_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28);
+ clks[IMX6SX_CLK_PWM7] = imx_clk_gate2("pwm7", "perclk", base + 0x80, 30);
+
+ clks[IMX6SX_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+ clks[IMX6SX_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24);
+
+ /* mask handshake of mmdc */
+ writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++)
+ if (IS_ERR(clks[i]))
+ pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+
+ clk_data.clks = clks;
+ clk_data.clk_num = ARRAY_SIZE(clks);
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+ clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0");
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clks[clks_init_on[i]]);
+
+ if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+ clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]);
+ clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]);
+ }
+
+ /* Set the default 132MHz for EIM module */
+ clk_set_parent(clks[IMX6SX_CLK_EIM_SLOW_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
+ clk_set_rate(clks[IMX6SX_CLK_EIM_SLOW], 132000000);
+
+ /* set parent clock for LCDIF1 pixel clock */
+ clk_set_parent(clks[IMX6SX_CLK_LCDIF1_PRE_SEL], clks[IMX6SX_CLK_PLL5_VIDEO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_LCDIF1_SEL], clks[IMX6SX_CLK_LCDIF1_PODF]);
+
+ /* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */
+ if (clk_set_parent(clks[IMX6SX_CLK_LVDS1_SEL], clks[IMX6SX_CLK_PCIE_REF_125M]))
+ pr_err("Failed to set pcie bus parent clk.\n");
+ if (clk_set_parent(clks[IMX6SX_CLK_PCIE_AXI_SEL], clks[IMX6SX_CLK_AXI]))
+ pr_err("Failed to set pcie parent clk.\n");
+
+ /*
+ * Init enet system AHB clock, set to 200Mhz
+ * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB
+ */
+ clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]);
+ clk_set_parent(clks[IMX6SX_CLK_ENET_SEL], clks[IMX6SX_CLK_ENET_PODF]);
+ clk_set_rate(clks[IMX6SX_CLK_ENET_PODF], 200000000);
+ clk_set_rate(clks[IMX6SX_CLK_ENET_REF], 125000000);
+ clk_set_rate(clks[IMX6SX_CLK_ENET2_REF], 125000000);
+
+ /* Audio clocks */
+ clk_set_rate(clks[IMX6SX_CLK_PLL4_AUDIO_DIV], 393216000);
+
+ clk_set_parent(clks[IMX6SX_CLK_SPDIF_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000);
+
+ clk_set_parent(clks[IMX6SX_CLK_AUDIO_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
+ clk_set_rate(clks[IMX6SX_CLK_AUDIO_PODF], 24000000);
+
+ clk_set_parent(clks[IMX6SX_CLK_SSI1_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_SSI2_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_parent(clks[IMX6SX_CLK_SSI3_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_SSI1_PODF], 24576000);
+ clk_set_rate(clks[IMX6SX_CLK_SSI2_PODF], 24576000);
+ clk_set_rate(clks[IMX6SX_CLK_SSI3_PODF], 24576000);
+
+ clk_set_parent(clks[IMX6SX_CLK_ESAI_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]);
+ clk_set_rate(clks[IMX6SX_CLK_ESAI_PODF], 24576000);
+
+ /* Set parent clock for vadc */
+ clk_set_parent(clks[IMX6SX_CLK_VID_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]);
+
+ /* default parent of can_sel clock is invalid, manually set it here */
+ clk_set_parent(clks[IMX6SX_CLK_CAN_SEL], clks[IMX6SX_CLK_PLL3_60M]);
+
+ /* Update gpu clock from default 528M to 720M */
+ clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
+ clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
+
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt");
+ mxc_timer_init_dt(np);
+}
+CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init);
diff --git a/include/dt-bindings/clock/imx6sx-clock.h b/include/dt-bindings/clock/imx6sx-clock.h
new file mode 100644
index 0000000..421d8bb
--- /dev/null
+++ b/include/dt-bindings/clock/imx6sx-clock.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6SX_H
+#define __DT_BINDINGS_CLOCK_IMX6SX_H
+
+#define IMX6SX_CLK_DUMMY 0
+#define IMX6SX_CLK_CKIL 1
+#define IMX6SX_CLK_CKIH 2
+#define IMX6SX_CLK_OSC 3
+#define IMX6SX_CLK_PLL1_SYS 4
+#define IMX6SX_CLK_PLL2_BUS 5
+#define IMX6SX_CLK_PLL3_USB_OTG 6
+#define IMX6SX_CLK_PLL4_AUDIO 7
+#define IMX6SX_CLK_PLL5_VIDEO 8
+#define IMX6SX_CLK_PLL6_ENET 9
+#define IMX6SX_CLK_PLL7_USB_HOST 10
+#define IMX6SX_CLK_USBPHY1 11
+#define IMX6SX_CLK_USBPHY2 12
+#define IMX6SX_CLK_USBPHY1_GATE 13
+#define IMX6SX_CLK_USBPHY2_GATE 14
+#define IMX6SX_CLK_PCIE_REF 15
+#define IMX6SX_CLK_PCIE_REF_125M 16
+#define IMX6SX_CLK_ENET_REF 17
+#define IMX6SX_CLK_PLL2_PFD0 18
+#define IMX6SX_CLK_PLL2_PFD1 19
+#define IMX6SX_CLK_PLL2_PFD2 20
+#define IMX6SX_CLK_PLL2_PFD3 21
+#define IMX6SX_CLK_PLL3_PFD0 22
+#define IMX6SX_CLK_PLL3_PFD1 23
+#define IMX6SX_CLK_PLL3_PFD2 24
+#define IMX6SX_CLK_PLL3_PFD3 25
+#define IMX6SX_CLK_PLL2_198M 26
+#define IMX6SX_CLK_PLL3_120M 27
+#define IMX6SX_CLK_PLL3_80M 28
+#define IMX6SX_CLK_PLL3_60M 29
+#define IMX6SX_CLK_TWD 30
+#define IMX6SX_CLK_PLL4_POST_DIV 31
+#define IMX6SX_CLK_PLL4_AUDIO_DIV 32
+#define IMX6SX_CLK_PLL5_POST_DIV 33
+#define IMX6SX_CLK_PLL5_VIDEO_DIV 34
+#define IMX6SX_CLK_STEP 35
+#define IMX6SX_CLK_PLL1_SW 36
+#define IMX6SX_CLK_OCRAM_SEL 37
+#define IMX6SX_CLK_PERIPH_PRE 38
+#define IMX6SX_CLK_PERIPH2_PRE 39
+#define IMX6SX_CLK_PERIPH_CLK2_SEL 40
+#define IMX6SX_CLK_PERIPH2_CLK2_SEL 41
+#define IMX6SX_CLK_PCIE_AXI_SEL 42
+#define IMX6SX_CLK_GPU_AXI_SEL 43
+#define IMX6SX_CLK_GPU_CORE_SEL 44
+#define IMX6SX_CLK_EIM_SLOW_SEL 45
+#define IMX6SX_CLK_USDHC1_SEL 46
+#define IMX6SX_CLK_USDHC2_SEL 47
+#define IMX6SX_CLK_USDHC3_SEL 48
+#define IMX6SX_CLK_USDHC4_SEL 49
+#define IMX6SX_CLK_SSI1_SEL 50
+#define IMX6SX_CLK_SSI2_SEL 51
+#define IMX6SX_CLK_SSI3_SEL 52
+#define IMX6SX_CLK_QSPI1_SEL 53
+#define IMX6SX_CLK_PERCLK_SEL 54
+#define IMX6SX_CLK_VID_SEL 55
+#define IMX6SX_CLK_ESAI_SEL 56
+#define IMX6SX_CLK_LDB_DI0_DIV_SEL 57
+#define IMX6SX_CLK_LDB_DI1_DIV_SEL 58
+#define IMX6SX_CLK_CAN_SEL 59
+#define IMX6SX_CLK_UART_SEL 60
+#define IMX6SX_CLK_QSPI2_SEL 61
+#define IMX6SX_CLK_LDB_DI1_SEL 62
+#define IMX6SX_CLK_LDB_DI0_SEL 63
+#define IMX6SX_CLK_SPDIF_SEL 64
+#define IMX6SX_CLK_AUDIO_SEL 65
+#define IMX6SX_CLK_ENET_PRE_SEL 66
+#define IMX6SX_CLK_ENET_SEL 67
+#define IMX6SX_CLK_M4_PRE_SEL 68
+#define IMX6SX_CLK_M4_SEL 69
+#define IMX6SX_CLK_ECSPI_SEL 70
+#define IMX6SX_CLK_LCDIF1_PRE_SEL 71
+#define IMX6SX_CLK_LCDIF2_PRE_SEL 72
+#define IMX6SX_CLK_LCDIF1_SEL 73
+#define IMX6SX_CLK_LCDIF2_SEL 74
+#define IMX6SX_CLK_DISPLAY_SEL 75
+#define IMX6SX_CLK_CSI_SEL 76
+#define IMX6SX_CLK_CKO1_SEL 77
+#define IMX6SX_CLK_CKO2_SEL 78
+#define IMX6SX_CLK_CKO 79
+#define IMX6SX_CLK_PERIPH_CLK2 80
+#define IMX6SX_CLK_PERIPH2_CLK2 81
+#define IMX6SX_CLK_IPG 82
+#define IMX6SX_CLK_GPU_CORE_PODF 83
+#define IMX6SX_CLK_GPU_AXI_PODF 84
+#define IMX6SX_CLK_LCDIF1_PODF 85
+#define IMX6SX_CLK_QSPI1_PODF 86
+#define IMX6SX_CLK_EIM_SLOW_PODF 87
+#define IMX6SX_CLK_LCDIF2_PODF 88
+#define IMX6SX_CLK_PERCLK 89
+#define IMX6SX_CLK_VID_PODF 90
+#define IMX6SX_CLK_CAN_PODF 91
+#define IMX6SX_CLK_USDHC1_PODF 92
+#define IMX6SX_CLK_USDHC2_PODF 93
+#define IMX6SX_CLK_USDHC3_PODF 94
+#define IMX6SX_CLK_USDHC4_PODF 95
+#define IMX6SX_CLK_UART_PODF 96
+#define IMX6SX_CLK_ESAI_PRED 97
+#define IMX6SX_CLK_ESAI_PODF 98
+#define IMX6SX_CLK_SSI3_PRED 99
+#define IMX6SX_CLK_SSI3_PODF 100
+#define IMX6SX_CLK_SSI1_PRED 101
+#define IMX6SX_CLK_SSI1_PODF 102
+#define IMX6SX_CLK_QSPI2_PRED 103
+#define IMX6SX_CLK_QSPI2_PODF 104
+#define IMX6SX_CLK_SSI2_PRED 105
+#define IMX6SX_CLK_SSI2_PODF 106
+#define IMX6SX_CLK_SPDIF_PRED 107
+#define IMX6SX_CLK_SPDIF_PODF 108
+#define IMX6SX_CLK_AUDIO_PRED 109
+#define IMX6SX_CLK_AUDIO_PODF 110
+#define IMX6SX_CLK_ENET_PODF 111
+#define IMX6SX_CLK_M4_PODF 112
+#define IMX6SX_CLK_ECSPI_PODF 113
+#define IMX6SX_CLK_LCDIF1_PRED 114
+#define IMX6SX_CLK_LCDIF2_PRED 115
+#define IMX6SX_CLK_DISPLAY_PODF 116
+#define IMX6SX_CLK_CSI_PODF 117
+#define IMX6SX_CLK_LDB_DI0_DIV_3_5 118
+#define IMX6SX_CLK_LDB_DI0_DIV_7 119
+#define IMX6SX_CLK_LDB_DI1_DIV_3_5 120
+#define IMX6SX_CLK_LDB_DI1_DIV_7 121
+#define IMX6SX_CLK_CKO1_PODF 122
+#define IMX6SX_CLK_CKO2_PODF 123
+#define IMX6SX_CLK_PERIPH 124
+#define IMX6SX_CLK_PERIPH2 125
+#define IMX6SX_CLK_OCRAM 126
+#define IMX6SX_CLK_AHB 127
+#define IMX6SX_CLK_MMDC_PODF 128
+#define IMX6SX_CLK_ARM 129
+#define IMX6SX_CLK_AIPS_TZ1 130
+#define IMX6SX_CLK_AIPS_TZ2 131
+#define IMX6SX_CLK_APBH_DMA 132
+#define IMX6SX_CLK_ASRC_GATE 133
+#define IMX6SX_CLK_CAAM_MEM 134
+#define IMX6SX_CLK_CAAM_ACLK 135
+#define IMX6SX_CLK_CAAM_IPG 136
+#define IMX6SX_CLK_CAN1_IPG 137
+#define IMX6SX_CLK_CAN1_SERIAL 138
+#define IMX6SX_CLK_CAN2_IPG 139
+#define IMX6SX_CLK_CAN2_SERIAL 140
+#define IMX6SX_CLK_CPU_DEBUG 141
+#define IMX6SX_CLK_DCIC1 142
+#define IMX6SX_CLK_DCIC2 143
+#define IMX6SX_CLK_AIPS_TZ3 144
+#define IMX6SX_CLK_ECSPI1 145
+#define IMX6SX_CLK_ECSPI2 146
+#define IMX6SX_CLK_ECSPI3 147
+#define IMX6SX_CLK_ECSPI4 148
+#define IMX6SX_CLK_ECSPI5 149
+#define IMX6SX_CLK_EPIT1 150
+#define IMX6SX_CLK_EPIT2 151
+#define IMX6SX_CLK_ESAI_EXTAL 152
+#define IMX6SX_CLK_WAKEUP 153
+#define IMX6SX_CLK_GPT_BUS 154
+#define IMX6SX_CLK_GPT_SERIAL 155
+#define IMX6SX_CLK_GPU 156
+#define IMX6SX_CLK_OCRAM_S 157
+#define IMX6SX_CLK_CANFD 158
+#define IMX6SX_CLK_CSI 159
+#define IMX6SX_CLK_I2C1 160
+#define IMX6SX_CLK_I2C2 161
+#define IMX6SX_CLK_I2C3 162
+#define IMX6SX_CLK_OCOTP 163
+#define IMX6SX_CLK_IOMUXC 164
+#define IMX6SX_CLK_IPMUX1 165
+#define IMX6SX_CLK_IPMUX2 166
+#define IMX6SX_CLK_IPMUX3 167
+#define IMX6SX_CLK_TZASC1 168
+#define IMX6SX_CLK_LCDIF_APB 169
+#define IMX6SX_CLK_PXP_AXI 170
+#define IMX6SX_CLK_M4 171
+#define IMX6SX_CLK_ENET 172
+#define IMX6SX_CLK_DISPLAY_AXI 173
+#define IMX6SX_CLK_LCDIF2_PIX 174
+#define IMX6SX_CLK_LCDIF1_PIX 175
+#define IMX6SX_CLK_LDB_DI0 176
+#define IMX6SX_CLK_QSPI1 177
+#define IMX6SX_CLK_MLB 178
+#define IMX6SX_CLK_MMDC_P0_FAST 179
+#define IMX6SX_CLK_MMDC_P0_IPG 180
+#define IMX6SX_CLK_AXI 181
+#define IMX6SX_CLK_PCIE_AXI 182
+#define IMX6SX_CLK_QSPI2 183
+#define IMX6SX_CLK_PER1_BCH 184
+#define IMX6SX_CLK_PER2_MAIN 185
+#define IMX6SX_CLK_PWM1 186
+#define IMX6SX_CLK_PWM2 187
+#define IMX6SX_CLK_PWM3 188
+#define IMX6SX_CLK_PWM4 189
+#define IMX6SX_CLK_GPMI_BCH_APB 190
+#define IMX6SX_CLK_GPMI_BCH 191
+#define IMX6SX_CLK_GPMI_IO 192
+#define IMX6SX_CLK_GPMI_APB 193
+#define IMX6SX_CLK_ROM 194
+#define IMX6SX_CLK_SDMA 195
+#define IMX6SX_CLK_SPBA 196
+#define IMX6SX_CLK_SPDIF 197
+#define IMX6SX_CLK_SSI1_IPG 198
+#define IMX6SX_CLK_SSI2_IPG 199
+#define IMX6SX_CLK_SSI3_IPG 200
+#define IMX6SX_CLK_SSI1 201
+#define IMX6SX_CLK_SSI2 202
+#define IMX6SX_CLK_SSI3 203
+#define IMX6SX_CLK_UART_IPG 204
+#define IMX6SX_CLK_UART_SERIAL 205
+#define IMX6SX_CLK_SAI1 206
+#define IMX6SX_CLK_SAI2 207
+#define IMX6SX_CLK_USBOH3 208
+#define IMX6SX_CLK_USDHC1 209
+#define IMX6SX_CLK_USDHC2 210
+#define IMX6SX_CLK_USDHC3 211
+#define IMX6SX_CLK_USDHC4 212
+#define IMX6SX_CLK_EIM_SLOW 213
+#define IMX6SX_CLK_PWM8 214
+#define IMX6SX_CLK_VADC 215
+#define IMX6SX_CLK_GIS 216
+#define IMX6SX_CLK_I2C4 217
+#define IMX6SX_CLK_PWM5 218
+#define IMX6SX_CLK_PWM6 219
+#define IMX6SX_CLK_PWM7 220
+#define IMX6SX_CLK_CKO1 221
+#define IMX6SX_CLK_CKO2 222
+#define IMX6SX_CLK_IPP_DI0 223
+#define IMX6SX_CLK_IPP_DI1 224
+#define IMX6SX_CLK_ENET_AHB 225
+#define IMX6SX_CLK_OCRAM_PODF 226
+#define IMX6SX_CLK_GPT_3M 227
+#define IMX6SX_CLK_ENET_PTP 228
+#define IMX6SX_CLK_ENET_PTP_REF 229
+#define IMX6SX_CLK_ENET2_REF 230
+#define IMX6SX_CLK_ENET2_REF_125M 231
+#define IMX6SX_CLK_AUDIO 232
+#define IMX6SX_CLK_LVDS1_SEL 233
+#define IMX6SX_CLK_LVDS1_OUT 234
+#define IMX6SX_CLK_ASRC_IPG 235
+#define IMX6SX_CLK_ASRC_MEM 236
+#define IMX6SX_CLK_SAI1_IPG 237
+#define IMX6SX_CLK_SAI2_IPG 238
+#define IMX6SX_CLK_ESAI_IPG 239
+#define IMX6SX_CLK_ESAI_MEM 240
+#define IMX6SX_CLK_CLK_END 241
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6SX_H */
--
1.8.3.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/6] ARM: imx: add basic imx6sx SoC support
2014-05-13 14:12 [PATCH 0/6] ARM: imx: add initial i.MX6 SoloX support Shawn Guo
2014-05-13 14:12 ` [PATCH 1/6] ARM: imx: add low-level debug support for imx6sx Shawn Guo
2014-05-13 14:12 ` [PATCH 2/6] ARM: imx: add clock driver " Shawn Guo
@ 2014-05-13 14:12 ` Shawn Guo
2014-05-13 14:12 ` [PATCH 5/6] ARM: dts: imx: add initial imx6sx device tree source Shawn Guo
2014-05-13 14:12 ` [PATCH 6/6] ARM: dts: imx: add initial imx6sx-sdb board support Shawn Guo
4 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2014-05-13 14:12 UTC (permalink / raw)
To: linux-arm-kernel
Add basic suppport for i.MX6 SoloX SoC.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
---
arch/arm/mach-imx/Kconfig | 8 +++++++
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/cpu.c | 3 +++
arch/arm/mach-imx/mach-imx6sx.c | 51 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/mxc.h | 6 +++++
5 files changed, 69 insertions(+)
create mode 100644 arch/arm/mach-imx/mach-imx6sx.c
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index d56eb1a..fe49353 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -797,6 +797,14 @@ config SOC_IMX6SL
help
This enables support for Freescale i.MX6 SoloLite processor.
+config SOC_IMX6SX
+ bool "i.MX6 SoloX support"
+ select PINCTRL_IMX6SX
+ select SOC_IMX6
+
+ help
+ This enables support for Freescale i.MX6 SoloX processor.
+
config SOC_VF610
bool "Vybrid Family VF610 support"
select ARM_GIC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8dd377b..f976fb5 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index ba3b498..bbe8ff1 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -111,6 +111,9 @@ struct device * __init imx_soc_device_init(void)
case MXC_CPU_IMX6DL:
soc_id = "i.MX6DL";
break;
+ case MXC_CPU_IMX6SX:
+ soc_id = "i.MX6SX";
+ break;
case MXC_CPU_IMX6Q:
soc_id = "i.MX6Q";
break;
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
new file mode 100644
index 0000000..02fccf6
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+static void __init imx6sx_init_machine(void)
+{
+ struct device *parent;
+
+ mxc_arch_reset_init_dt();
+
+ parent = imx_soc_device_init();
+ if (parent == NULL)
+ pr_warn("failed to initialize soc device\n");
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+
+ imx_anatop_init();
+}
+
+static void __init imx6sx_init_irq(void)
+{
+ imx_init_revision_from_anatop();
+ imx_init_l2cache();
+ imx_src_init();
+ imx_gpc_init();
+ irqchip_init();
+}
+
+static const char *imx6sx_dt_compat[] __initconst = {
+ "fsl,imx6sx",
+ NULL,
+};
+
+DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
+ .map_io = debug_ll_io_init,
+ .init_irq = imx6sx_init_irq,
+ .init_machine = imx6sx_init_machine,
+ .dt_compat = imx6sx_dt_compat,
+ .restart = mxc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index b08ab3a..75d6a37 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -36,6 +36,7 @@
#define MXC_CPU_MX53 53
#define MXC_CPU_IMX6SL 0x60
#define MXC_CPU_IMX6DL 0x61
+#define MXC_CPU_IMX6SX 0x62
#define MXC_CPU_IMX6Q 0x63
#define IMX_CHIP_REVISION_1_0 0x10
@@ -163,6 +164,11 @@ static inline bool cpu_is_imx6dl(void)
return __mxc_cpu_type == MXC_CPU_IMX6DL;
}
+static inline bool cpu_is_imx6sx(void)
+{
+ return __mxc_cpu_type == MXC_CPU_IMX6SX;
+}
+
static inline bool cpu_is_imx6q(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6Q;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 5/6] ARM: dts: imx: add initial imx6sx device tree source
2014-05-13 14:12 [PATCH 0/6] ARM: imx: add initial i.MX6 SoloX support Shawn Guo
` (2 preceding siblings ...)
2014-05-13 14:12 ` [PATCH 3/6] ARM: imx: add basic imx6sx SoC support Shawn Guo
@ 2014-05-13 14:12 ` Shawn Guo
2014-05-13 14:12 ` [PATCH 6/6] ARM: dts: imx: add initial imx6sx-sdb board support Shawn Guo
4 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2014-05-13 14:12 UTC (permalink / raw)
To: linux-arm-kernel
Add initial device tree source for i.MX6 SoloX SoC.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
---
arch/arm/boot/dts/imx6sx.dtsi | 1202 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 1202 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx.dtsi
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
new file mode 100644
index 0000000..ac3866c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -0,0 +1,1202 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sx-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+ aliases {
+ can0 = &flexcan1;
+ can1 = &flexcan2;
+ ethernet0 = &fec1;
+ ethernet1 = &fec2;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ mmc3 = &usdhc4;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ spi3 = &ecspi4;
+ spi4 = &ecspi5;
+ usbphy0 = &usbphy1;
+ usbphy1 = &usbphy2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1075000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC uV */
+ 996000 1175000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6SX_CLK_ARM>,
+ <&clks IMX6SX_CLK_PLL2_PFD2>,
+ <&clks IMX6SX_CLK_STEP>,
+ <&clks IMX6SX_CLK_PLL1_SW>,
+ <&clks IMX6SX_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ soc-supply = <®_soc>;
+ };
+ };
+
+ intc: interrupt-controller at 00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil: clock at 0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
+ };
+
+ osc: clock at 1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
+
+ ipp_di0: clock at 2 {
+ compatible = "fixed-clock";
+ reg = <2>;
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di0";
+ };
+
+ ipp_di1: clock at 3 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "ipp_di1";
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ocram: sram at 00900000 {
+ compatible = "mmio-sram";
+ reg = <0x00900000 0x20000>;
+ clocks = <&clks IMX6SX_CLK_OCRAM>;
+ };
+
+ L2: l2-cache at 00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <4 2 3>;
+ arm,data-latency = <4 2 3>;
+ };
+
+ dma_apbh: dma-apbh at 01804000 {
+ compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
+ reg = <0x01804000 0x2000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ clocks = <&clks IMX6SX_CLK_APBH_DMA>;
+ };
+
+ gpmi: gpmi-nand at 01806000{
+ compatible = "fsl,imx6sx-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "bch";
+ clocks = <&clks IMX6SX_CLK_GPMI_IO>,
+ <&clks IMX6SX_CLK_GPMI_APB>,
+ <&clks IMX6SX_CLK_GPMI_BCH>,
+ <&clks IMX6SX_CLK_GPMI_BCH_APB>,
+ <&clks IMX6SX_CLK_PER1_BCH>;
+ clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+ "gpmi_bch_apb", "per1_bch";
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ aips1: aips-bus at 02000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus at 02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif: spdif at 02004000 {
+ compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
+ reg = <0x02004000 0x4000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 14 18 0>,
+ <&sdma 15 18 0>;
+ dma-names = "rx", "tx";
+ clocks = <&clks IMX6SX_CLK_SPDIF>,
+ <&clks IMX6SX_CLK_OSC>,
+ <&clks IMX6SX_CLK_SPDIF>,
+ <&clks 0>, <&clks 0>, <&clks 0>,
+ <&clks IMX6SX_CLK_IPG>,
+ <&clks 0>, <&clks 0>,
+ <&clks IMX6SX_CLK_SPBA>;
+ clock-names = "core", "rxtx0",
+ "rxtx1", "rxtx2",
+ "rxtx3", "rxtx4",
+ "rxtx5", "rxtx6",
+ "rxtx7", "dma";
+ status = "disabled";
+ };
+
+ ecspi1: ecspi at 02008000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ECSPI1>,
+ <&clks IMX6SX_CLK_ECSPI1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: ecspi at 0200c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ECSPI2>,
+ <&clks IMX6SX_CLK_ECSPI2>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: ecspi at 02010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ECSPI3>,
+ <&clks IMX6SX_CLK_ECSPI3>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi4: ecspi at 02014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ECSPI4>,
+ <&clks IMX6SX_CLK_ECSPI4>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial at 02020000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ esai: esai at 02024000 {
+ reg = <0x02024000 0x4000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
+ <&clks IMX6SX_CLK_ESAI_MEM>,
+ <&clks IMX6SX_CLK_ESAI_EXTAL>,
+ <&clks IMX6SX_CLK_ESAI_IPG>,
+ <&clks IMX6SX_CLK_SPBA>;
+ clock-names = "core", "mem", "extal",
+ "fsys", "dma";
+ status = "disabled";
+ };
+
+ ssi1: ssi at 02028000 {
+ compatible = "fsl,imx6sx-ssi", "fsl,imx21-ssi";
+ reg = <0x02028000 0x4000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
+ <&clks IMX6SX_CLK_SSI1>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ ssi2: ssi at 0202c000 {
+ compatible = "fsl,imx6sx-ssi", "fsl,imx21-ssi";
+ reg = <0x0202c000 0x4000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
+ <&clks IMX6SX_CLK_SSI2>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ ssi3: ssi at 02030000 {
+ compatible = "fsl,imx6sx-ssi", "fsl,imx21-ssi";
+ reg = <0x02030000 0x4000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
+ <&clks IMX6SX_CLK_SSI3>;
+ clock-names = "ipg", "baud";
+ dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ asrc: asrc at 02034000 {
+ reg = <0x02034000 0x4000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
+ <&clks IMX6SX_CLK_ASRC_IPG>,
+ <&clks IMX6SX_CLK_SPDIF>,
+ <&clks IMX6SX_CLK_SPBA>;
+ clock-names = "mem", "ipg", "asrck", "dma";
+ dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
+ <&sdma 19 20 1>, <&sdma 20 20 1>,
+ <&sdma 21 20 1>, <&sdma 22 20 1>;
+ dma-names = "rxa", "rxb", "rxc",
+ "txa", "txb", "txc";
+ status = "okay";
+ };
+ };
+
+ pwm1: pwm at 02080000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x02080000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM1>,
+ <&clks IMX6SX_CLK_PWM1>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm2: pwm at 02084000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x02084000 0x4000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM2>,
+ <&clks IMX6SX_CLK_PWM2>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm3: pwm at 02088000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x02088000 0x4000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM3>,
+ <&clks IMX6SX_CLK_PWM3>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm4: pwm at 0208c000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x0208c000 0x4000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM4>,
+ <&clks IMX6SX_CLK_PWM4>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ flexcan1: can at 02090000 {
+ compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x02090000 0x4000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
+ <&clks IMX6SX_CLK_CAN1_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ flexcan2: can at 02094000 {
+ compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x02094000 0x4000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
+ <&clks IMX6SX_CLK_CAN2_SERIAL>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ gpt: gpt at 02098000 {
+ compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_GPT_BUS>,
+ <&clks IMX6SX_CLK_GPT_SERIAL>;
+ clock-names = "ipg", "per";
+ };
+
+ gpio1: gpio at 0209c000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio at 020a0000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio at 020a4000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio at 020a8000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio at 020ac000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio at 020b0000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020b0000 0x4000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio at 020b4000 {
+ compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+ reg = <0x020b4000 0x4000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ kpp: kpp at 020b8000 {
+ compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
+ reg = <0x020b8000 0x4000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ wdog1: wdog at 020bc000 {
+ compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DUMMY>;
+ };
+
+ wdog2: wdog at 020c0000 {
+ compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ clks: ccm at 020c4000 {
+ compatible = "fsl,imx6sx-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
+
+ anatop: anatop at 020c8000 {
+ compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
+ "syscon", "simple-bus";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+ regulator-1p1 at 110 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x110>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <4>;
+ anatop-min-voltage = <800000>;
+ anatop-max-voltage = <1375000>;
+ };
+
+ regulator-3p0 at 120 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x120>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2625000>;
+ anatop-max-voltage = <3400000>;
+ };
+
+ regulator-2p5 at 130 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2875000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x130>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2100000>;
+ anatop-max-voltage = <2875000>;
+ };
+
+ reg_arm: regulator-vddcore at 140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "cpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <0>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <24>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_pcie: regulator-vddpcie at 140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddpcie";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <9>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <26>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ reg_soc: regulator-vddsoc at 140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <18>;
+ anatop-vol-bit-width = <5>;
+ anatop-delay-reg-offset = <0x170>;
+ anatop-delay-bit-shift = <28>;
+ anatop-delay-bit-width = <2>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+ };
+
+ tempmon: tempmon {
+ compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,tempmon = <&anatop>;
+ fsl,tempmon-data = <&ocotp>;
+ clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+ };
+
+ usbphy1: usbphy at 020c9000 {
+ compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020c9000 0x1000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USBPHY1>;
+ fsl,anatop = <&anatop>;
+ };
+
+ usbphy2: usbphy at 020ca000 {
+ compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+ reg = <0x020ca000 0x1000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USBPHY2>;
+ fsl,anatop = <&anatop>;
+ };
+
+ snvs: snvs at 020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x020cc000 0x4000>;
+
+ snvs-rtc-lp at 34 {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ reg = <0x34 0x58>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ epit1: epit at 020d0000 {
+ reg = <0x020d0000 0x4000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ epit2: epit at 020d4000 {
+ reg = <0x020d4000 0x4000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ src: src at 020d8000 {
+ compatible = "fsl,imx6sx-src", "fsl,imx51-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+
+ gpc: gpc at 020dc000 {
+ compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ iomuxc: iomuxc at 020e0000 {
+ compatible = "fsl,imx6sx-iomuxc";
+ reg = <0x020e0000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr at 020e4000 {
+ compatible = "fsl,imx6sx-iomuxc-gpr", "syscon";
+ reg = <0x020e4000 0x4000>;
+ };
+
+ sdma: sdma at 020ec000 {
+ compatible = "fsl,imx6sx-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SDMA>,
+ <&clks IMX6SX_CLK_SDMA>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ };
+ };
+
+ aips2: aips-bus at 02100000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ usbotg1: usb at 02184000 {
+ compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+ reg = <0x02184000 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ fsl,anatop = <&anatop>;
+ status = "disabled";
+ };
+
+ usbotg2: usb at 02184200 {
+ compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+ reg = <0x02184200 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy2>;
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbh: usb at 02184400 {
+ compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+ reg = <0x02184400 0x200>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USBOH3>;
+ fsl,usbmisc = <&usbmisc 2>;
+ phy_type = "hsic";
+ fsl,anatop = <&anatop>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc at 02184800 {
+ #index-cells = <1>;
+ compatible = "fsl,imx6sx-usbmisc";
+ reg = <0x02184800 0x200>;
+ clocks = <&clks IMX6SX_CLK_USBOH3>;
+ };
+
+ fec1: ethernet at 02188000 {
+ compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ENET>,
+ <&clks IMX6SX_CLK_ENET_AHB>,
+ <&clks IMX6SX_CLK_ENET_PTP>,
+ <&clks IMX6SX_CLK_ENET_REF>,
+ <&clks IMX6SX_CLK_ENET_PTP>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ status = "disabled";
+ };
+
+ mlb: mlb at 0218c000 {
+ reg = <0x0218c000 0x4000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_MLB>;
+ status = "disabled";
+ };
+
+ usdhc1: usdhc at 02190000 {
+ compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USDHC1>,
+ <&clks IMX6SX_CLK_USDHC1>,
+ <&clks IMX6SX_CLK_USDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc at 02194000 {
+ compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USDHC2>,
+ <&clks IMX6SX_CLK_USDHC2>,
+ <&clks IMX6SX_CLK_USDHC2>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc3: usdhc at 02198000 {
+ compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USDHC3>,
+ <&clks IMX6SX_CLK_USDHC3>,
+ <&clks IMX6SX_CLK_USDHC3>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc4: usdhc at 0219c000 {
+ compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_USDHC4>,
+ <&clks IMX6SX_CLK_USDHC4>,
+ <&clks IMX6SX_CLK_USDHC4>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at 021a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at 021a4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_I2C2>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at 021a8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_I2C3>;
+ status = "disabled";
+ };
+
+ mmdc: mmdc at 021b0000 {
+ compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ fec2: ethernet at 021b4000 {
+ compatible = "fsl,imx6sx-fec";
+ reg = <0x021b4000 0x4000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ENET>,
+ <&clks IMX6SX_CLK_ENET_AHB>,
+ <&clks IMX6SX_CLK_ENET_PTP>,
+ <&clks IMX6SX_CLK_ENET2_REF_125M>,
+ <&clks IMX6SX_CLK_ENET_PTP>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ status = "disabled";
+ };
+
+ weim: weim at 021b8000 {
+ compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
+ };
+
+ ocotp: ocotp at 021bc000 {
+ compatible = "fsl,imx6sx-ocotp", "syscon";
+ reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6SX_CLK_OCOTP>;
+ };
+
+ sai1: sai at 021d4000 {
+ compatible = "fsl,imx6sx-sai";
+ reg = <0x021d4000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
+ <&clks IMX6SX_CLK_SAI1>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 31 23 0>, <&sdma 32 23 0>;
+ dma-source = <&gpr 0 15 0 16>;
+ status = "disabled";
+ };
+
+ audmux: audmux at 021d8000 {
+ compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
+ reg = <0x021d8000 0x4000>;
+ status = "disabled";
+ };
+
+ sai2: sai at 021dc000 {
+ compatible = "fsl,imx6sx-sai";
+ reg = <0x021dc000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
+ <&clks IMX6SX_CLK_SAI2>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&sdma 33 23 0>, <&sdma 34 23 0>;
+ dma-source = <&gpr 0 17 0 18>;
+ status = "disabled";
+ };
+
+ qspi1: qspi at 021e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-qspi";
+ reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_QSPI1>,
+ <&clks IMX6SX_CLK_QSPI1>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ qspi2: qspi at 021e4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-qspi";
+ reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_QSPI2>,
+ <&clks IMX6SX_CLK_QSPI2>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ uart2: serial at 021e8000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart3: serial at 021ec000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x021ec000 0x4000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart4: serial at 021f0000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x021f0000 0x4000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ uart5: serial at 021f4000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ i2c4: i2c at 021f8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+ reg = <0x021f8000 0x4000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_I2C4>;
+ status = "disabled";
+ };
+ };
+
+ aips3: aips-bus at 02200000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02200000 0x100000>;
+ ranges;
+
+ spba-bus at 02200000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02240000 0x40000>;
+ ranges;
+
+ csi1: csi at 02214000 {
+ reg = <0x02214000 0x4000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+ <&clks IMX6SX_CLK_CSI>,
+ <&clks IMX6SX_CLK_DCIC1>;
+ clock-names = "disp-axi", "csi_mclk", "dcic";
+ status = "disabled";
+ };
+
+ pxp: pxp at 02218000 {
+ reg = <0x02218000 0x4000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PXP_AXI>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pxp-axi", "disp-axi";
+ status = "disabled";
+ };
+
+ csi2: csi at 0221c000 {
+ reg = <0x0221c000 0x4000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+ <&clks IMX6SX_CLK_CSI>,
+ <&clks IMX6SX_CLK_DCIC2>;
+ clock-names = "disp-axi", "csi_mclk", "dcic";
+ status = "disabled";
+ };
+
+ lcdif1: lcdif at 02220000 {
+ reg = <0x02220000 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+ <&clks IMX6SX_CLK_LCDIF_APB>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+
+ lcdif2: lcdif at 02224000 {
+ reg = <0x02224000 0x4000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
+ <&clks IMX6SX_CLK_LCDIF_APB>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+
+ vadc: vadc at 02228000 {
+ reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
+ reg-names = "vadc-vafe", "vadc-vdec";
+ clocks = <&clks IMX6SX_CLK_VADC>,
+ <&clks IMX6SX_CLK_CSI>;
+ clock-names = "vadc", "csi";
+ status = "disabled";
+ };
+ };
+
+ adc1: adc at 02280000 {
+ compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+ reg = <0x02280000 0x4000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ adc2: adc at 02284000 {
+ compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+ reg = <0x02284000 0x4000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_IPG>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ wdog3: wdog at 02288000 {
+ compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+ reg = <0x02288000 0x4000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ ecspi5: ecspi at 0228c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0228c000 0x4000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_ECSPI5>,
+ <&clks IMX6SX_CLK_ECSPI5>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart6: serial at 022a0000 {
+ compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+ reg = <0x022a0000 0x4000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_UART_IPG>,
+ <&clks IMX6SX_CLK_UART_SERIAL>;
+ clock-names = "ipg", "per";
+ dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ pwm5: pwm at 022a4000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x022a4000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM5>,
+ <&clks IMX6SX_CLK_PWM5>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm6: pwm at 022a8000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x022a8000 0x4000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM6>,
+ <&clks IMX6SX_CLK_PWM6>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm7: pwm at 022ac000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x022ac000 0x4000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM7>,
+ <&clks IMX6SX_CLK_PWM7>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+
+ pwm8: pwm at 0022b0000 {
+ compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+ reg = <0x0022b0000 0x4000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PWM8>,
+ <&clks IMX6SX_CLK_PWM8>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ };
+ };
+
+ pcie: pcie at 0x08000000 {
+ compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+ reg = <0x08ffc000 0x4000>; /* DBI */
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ /* configuration space */
+ ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
+ /* downstream I/O */
+ 0x81000000 0 0 0x08f80000 0 0x00010000
+ /* non-prefetchable memory */
+ 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
+ num-lanes = <1>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
+ <&clks IMX6SX_CLK_PCIE_AXI>,
+ <&clks IMX6SX_CLK_LVDS1_OUT>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pcie_ref_125m", "pcie_axi",
+ "lvds_gate", "display_axi";
+ status = "disabled";
+ };
+ };
+};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 6/6] ARM: dts: imx: add initial imx6sx-sdb board support
2014-05-13 14:12 [PATCH 0/6] ARM: imx: add initial i.MX6 SoloX support Shawn Guo
` (3 preceding siblings ...)
2014-05-13 14:12 ` [PATCH 5/6] ARM: dts: imx: add initial imx6sx device tree source Shawn Guo
@ 2014-05-13 14:12 ` Shawn Guo
4 siblings, 0 replies; 6+ messages in thread
From: Shawn Guo @ 2014-05-13 14:12 UTC (permalink / raw)
To: linux-arm-kernel
Add initial imx6sx-sdb board support with limited devices enabled.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6sx-sdb.dts | 210 +++++++++++++++++++++++++++++++++++++++
2 files changed, 211 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6sx-sdb.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 917ff44..b7cc0dd 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -206,6 +206,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6sl-evk.dtb \
+ imx6sx-sdb.dtb \
vf610-colibri.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
new file mode 100644
index 0000000..9906f65
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloX SDB Board";
+ compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc_sd3: regulator at 0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_sd3>;
+ regulator-name = "VCC_SD3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <&vcc_sd3>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6x-sdb {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ >;
+ };
+
+ pinctrl_vcc_sd3: vccsd3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
+ MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
+ MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
+ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
+ MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
+ MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
+ >;
+ };
+ };
+};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-05-13 14:12 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-13 14:12 [PATCH 0/6] ARM: imx: add initial i.MX6 SoloX support Shawn Guo
2014-05-13 14:12 ` [PATCH 1/6] ARM: imx: add low-level debug support for imx6sx Shawn Guo
2014-05-13 14:12 ` [PATCH 2/6] ARM: imx: add clock driver " Shawn Guo
2014-05-13 14:12 ` [PATCH 3/6] ARM: imx: add basic imx6sx SoC support Shawn Guo
2014-05-13 14:12 ` [PATCH 5/6] ARM: dts: imx: add initial imx6sx device tree source Shawn Guo
2014-05-13 14:12 ` [PATCH 6/6] ARM: dts: imx: add initial imx6sx-sdb board support Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).