From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Tue, 13 May 2014 17:44:22 +0200 Subject: [PATCH RESEND v4 8/8] ARM: sunxi: dt: add APP4-EVB1 board support In-Reply-To: <1399995862-17788-1-git-send-email-maxime.ripard@free-electrons.com> References: <1399995862-17788-1-git-send-email-maxime.ripard@free-electrons.com> Message-ID: <1399995862-17788-9-git-send-email-maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Boris BREZILLON The APP4 EVB1 development boards embeds an A31, together with some NAND, one SD card slot, and one SDIO + UART WiFi and Bluetooth chip, a few I2C buses, USB, and a LCD display. Signed-off-by: Boris BREZILLON Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 57 +++++++++++++++++++++++++++++++ 2 files changed, 58 insertions(+) create mode 100644 arch/arm/boot/dts/sun6i-a31-app4-evb1.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8bc808cb7ce2..1d9c50dda655 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -344,6 +344,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ + sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ sun6i-a31-m9.dtb \ sun7i-a20-cubieboard2.dtb \ diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts new file mode 100644 index 000000000000..2bbf8867362b --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2014 Boris Brezillon + * + * Boris Brezillon + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Allwinner A31 APP4 EVB1 Evaluation Board"; + compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc at 01c00000 { + pio: pinctrl at 01c20800 { + usb1_vbus_pin_a: usb1_vbus_pin at 0 { + allwinner,pins = "PH27"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + usbphy: phy at 01c19400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb at 01c1a000 { + status = "okay"; + }; + + uart0: serial at 01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_a>; + gpio = <&pio 7 27 0>; + status = "okay"; + }; +}; -- 1.9.3