[PATCH v6 0/3] ARM: sunxi: Add support for consumer infrared devices

[PATCH v6 0/3] ARM: sunxi: Add support for consumer infrared devices

[Alexander Bersenev]

This patch introduces Consumer IR(CIR) support for sunxi boards.

This is based on Alexsey Shestacov's work based on the original driver 
supplied by Allwinner.

Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>

---
Changes since version 1: 
 - Fix timer memory leaks 
 - Fix race condition when driver unloads while interrupt handler is active
 - Support Cubieboard 2(need testing)

Changes since version 2:
- More reliable keydown events
- Documentation fixes
- Rename registers accurding to A20 user manual
- Remove some includes, order includes alphabetically
- Use BIT macro
- Typo fixes

Changes since version 3:
- Split the patch on smaller parts
- More documentation fixes
- Add clock-names in DT
- Use devm_clk_get function to get the clocks
- Removed gpios property from ir's DT
- Changed compatible from allwinner,sunxi-ir to allwinner,sun7i-a20-ir in DT
- Use spin_lock_irq instead spin_lock_irqsave in interrupt handler
- Add myself in the copyright ;)
- Coding style and indentation fixes

Changes since version 4:
- Try to fix indentation errors by sending patches with git send-mail

Changes since version 5:
- More indentation fixes
- Make patches pass checkpatch with --strict option
- Replaced magic numbers with defines(patch by Priit Laes)
- Fixed oops on loading(patch by Hans de Goede)



Alexander Bersenev (3):
  ARM: sunxi: Add documentation for sunxi consumer infrared devices
  ARM: sunxi: Add driver for sunxi IR controller
  ARM: sunxi: Add IR controller support in DT on A20

 .../devicetree/bindings/media/sunxi-ir.txt         |  23 ++
 arch/arm/boot/dts/sun7i-a20-cubieboard2.dts        |   6 +
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts         |   6 +
 arch/arm/boot/dts/sun7i-a20.dtsi                   |  31 +++
 drivers/media/rc/Kconfig                           |  10 +
 drivers/media/rc/Makefile                          |   1 +
 drivers/media/rc/sunxi-ir.c                        | 309 +++++++++++++++++++++
 7 files changed, 386 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/sunxi-ir.txt
 create mode 100644 drivers/media/rc/sunxi-ir.c

-- 
1.9.3

[PATCH v6 1/3] ARM: sunxi: Add documentation for sunxi consumer infrared devices

[Alexander Bersenev]

This patch adds documentation for Device-Tree bindings for sunxi IR
controller.

Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
---
 .../devicetree/bindings/media/sunxi-ir.txt         | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/sunxi-ir.txt

diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt
new file mode 100644
index 0000000..014dd8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
@@ -0,0 +1,23 @@
+Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
+
+Required properties:
+- compatible	    : should be "allwinner,sun7i-a20-ir";
+- clocks	    : list of clock specifiers, corresponding to
+		      entries in clock-names property;
+- clock-names	    : should contain "apb" and "ir" entries;
+- interrupts	    : should contain IR IRQ number;
+- reg		    : should contain IO map address for IR.
+
+Optional properties:
+- linux,rc-map-name : Remote control map name.
+
+Example:
+
+ir0: ir at 01c21800 {
+	compatible = "allwinner,sun7i-a20-ir";
+	clocks = <&apb0_gates 6>, <&ir0_clk>;
+	clock-names = "apb", "ir";
+	interrupts = <0 5 1>;
+	reg = <0x01C21800 0x40>;
+	linux,rc-map-name = "rc-rc6-mce";
+};
-- 
1.9.3

[PATCH v6 2/3] ARM: sunxi: Add driver for sunxi IR controller

[Alexander Bersenev]

This patch adds driver for sunxi IR controller.
It is based on Alexsey Shestacov's work based on the original driver
supplied by Allwinner.

Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
---
 drivers/media/rc/Kconfig    |  10 ++
 drivers/media/rc/Makefile   |   1 +
 drivers/media/rc/sunxi-ir.c | 309 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 320 insertions(+)
 create mode 100644 drivers/media/rc/sunxi-ir.c

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 8fbd377..9427fad 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -343,4 +343,14 @@ config RC_ST
 
 	 If you're not sure, select N here.
 
+config IR_SUNXI
+    tristate "SUNXI IR remote control"
+    depends on RC_CORE
+    depends on ARCH_SUNXI
+    ---help---
+      Say Y if you want to use sunXi internal IR Controller
+
+      To compile this driver as a module, choose M here: the module will
+      be called sunxi-ir.
+
 endif #RC_DEVICES
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index f8b54ff..93cdbe9 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -32,4 +32,5 @@ obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
 obj-$(CONFIG_IR_IGUANA) += iguanair.o
 obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
 obj-$(CONFIG_RC_ST) += st_rc.o
+obj-$(CONFIG_IR_SUNXI) += sunxi-ir.o
 obj-$(CONFIG_IR_IMG) += img-ir/
diff --git a/drivers/media/rc/sunxi-ir.c b/drivers/media/rc/sunxi-ir.c
new file mode 100644
index 0000000..5a01305
--- /dev/null
+++ b/drivers/media/rc/sunxi-ir.c
@@ -0,0 +1,309 @@
+/*
+ * Driver for Allwinner sunXi IR controller
+ *
+ * Copyright (C) 2014 Alexsey Shestacov <wingrime@linux-sunxi.org>
+ * Copyright (C) 2014 Alexander Bersenev <bay@hackerdom.ru>
+ *
+ * Based on sun5i-ir.c:
+ * Copyright (C) 2007-2012 Daniel Wang
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <media/rc-core.h>
+
+#define SUNXI_IR_DEV "sunxi-ir"
+
+/* Registers */
+/* IR Control */
+#define SUNXI_IR_CTL_REG      0x00
+/* Rx Config */
+#define SUNXI_IR_RXCTL_REG    0x10
+/* Rx Data */
+#define SUNXI_IR_RXFIFO_REG   0x20
+/* Rx Interrupt Enable */
+#define SUNXI_IR_RXINT_REG    0x2C
+/* Rx Interrupt Status */
+#define SUNXI_IR_RXSTA_REG    0x30
+/* IR Sample Config */
+#define SUNXI_IR_CIR_REG      0x34
+
+/* IR_RXINT_REG Register fields */
+#define REG_RXINT_ROI_EN      BIT(0) /* Rx FIFO Overflow */
+#define REG_RXINT_RPEI_EN     BIT(1) /* Rx Packet End */
+#define REG_RXINT_RAI_EN      BIT(4) /* Rx FIFO Data Available */
+/* Rx FIFO available byte level */
+#define REG_RXINT_RAL__MASK   (BIT(8)|BIT(9)|BIT(10)|BIT(11))
+#define REG_RXINT_RAL__SHIFT  8
+static inline uint32_t REG_RXINT_RAL(uint16_t val)
+{
+	return (val << REG_RXINT_RAL__SHIFT) & REG_RXINT_RAL__MASK;
+}
+
+/* Hardware supported fifo size */
+#define SUNXI_IR_FIFO_SIZE    16
+/* How many messages in FIFO trigger IRQ */
+#define TRIGGER_LEVEL         8
+/* Required frequency for IR0 or IR1 clock in CIR mode */
+#define SUNXI_IR_BASE_CLK     8000000
+/* Frequency after IR internal divider  */
+#define SUNXI_IR_CLK          (SUNXI_IR_BASE_CLK / 64)
+/* Sample period in ns */
+#define SUNXI_IR_SAMPLE       (1000000000ul / SUNXI_IR_CLK)
+/* Filter threshold in samples  */
+#define SUNXI_IR_RXFILT       1
+/* Idle Threshold in samples */
+#define SUNXI_IR_RXIDLE       20
+/* Time after which device stops sending data in ms */
+#define SUNXI_IR_TIMEOUT      120
+
+struct sunxi_ir {
+	spinlock_t      ir_lock;
+	struct rc_dev   *rc;
+	void __iomem    *base;
+	int             irq;
+	struct clk      *clk;
+	struct clk      *apb_clk;
+	const char      *map_name;
+};
+
+static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
+{
+	unsigned long status;
+	unsigned char dt;
+	unsigned int cnt, rc;
+	struct sunxi_ir *ir = dev_id;
+	DEFINE_IR_RAW_EVENT(rawir);
+
+	spin_lock(&ir->ir_lock);
+
+	status = readl(ir->base + SUNXI_IR_RXSTA_REG);
+
+	/* clean all pending statuses */
+	writel(status | 0xff, ir->base + SUNXI_IR_RXSTA_REG);
+
+	if (status & REG_RXINT_RAI_EN) {
+		/* How many messages in fifo */
+		rc  = (status >> 8) & 0x3f;
+		/* Sanity check */
+		rc = rc > SUNXI_IR_FIFO_SIZE ? SUNXI_IR_FIFO_SIZE : rc;
+		/* if we have data */
+		for (cnt = 0; cnt < rc; cnt++) {
+			/* for each bit in fifo */
+			dt = readb(ir->base + SUNXI_IR_RXFIFO_REG);
+			rawir.pulse = (dt & 0x80) != 0;
+			rawir.duration = (dt & 0x7f) * SUNXI_IR_SAMPLE;
+			ir_raw_event_store_with_filter(ir->rc, &rawir);
+		}
+	}
+
+	if (status & REG_RXINT_ROI_EN) {
+		ir_raw_event_reset(ir->rc);
+	} else if (status & REG_RXINT_RPEI_EN) {
+		ir_raw_event_set_idle(ir->rc, true);
+		ir_raw_event_handle(ir->rc);
+	}
+
+	spin_unlock(&ir->ir_lock);
+
+	return IRQ_HANDLED;
+}
+
+
+static int sunxi_ir_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	unsigned long tmp = 0;
+
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = dev->of_node;
+	struct resource *res;
+	struct sunxi_ir *ir;
+
+	ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
+	if (!ir)
+		return -ENOMEM;
+
+	/* Clock */
+	ir->apb_clk = devm_clk_get(dev, "apb");
+	if (IS_ERR(ir->apb_clk)) {
+		dev_err(dev, "failed to get a apb clock.\n");
+		return -EINVAL;
+	}
+	ir->clk = devm_clk_get(dev, "ir");
+	if (IS_ERR(ir->clk)) {
+		dev_err(dev, "failed to get a ir clock.\n");
+		return -EINVAL;
+	}
+
+	ret = clk_set_rate(ir->clk, SUNXI_IR_BASE_CLK);
+	if (ret) {
+		dev_err(dev, "set ir base clock failed!\n");
+		return -EINVAL;
+	}
+
+	if (clk_prepare_enable(ir->apb_clk)) {
+		dev_err(dev, "try to enable apb_ir_clk failed\n");
+		return -EINVAL;
+	}
+
+	if (clk_prepare_enable(ir->clk)) {
+		dev_err(dev, "try to enable ir_clk failed\n");
+		ret = -EINVAL;
+		goto exit_clkdisable_apb_clk;
+	}
+
+	/* IO */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	ir->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ir->base)) {
+		dev_err(dev, "failed to map registers\n");
+		ret = -ENOMEM;
+		goto exit_clkdisable_clk;
+	}
+
+	/* IRQ */
+	ir->irq = platform_get_irq(pdev, 0);
+	if (ir->irq < 0) {
+		dev_err(dev, "no irq resource\n");
+		ret = -EINVAL;
+		goto exit_clkdisable_clk;
+	}
+
+	ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
+	if (ret) {
+		dev_err(dev, "failed request irq\n");
+		ret = -EINVAL;
+		goto exit_clkdisable_clk;
+	}
+
+	ir->rc = rc_allocate_device();
+
+	if (!ir->rc) {
+		dev_err(dev, "failed to allocate device\n");
+		ret = -ENOMEM;
+		goto exit_clkdisable_clk;
+	}
+
+	ir->rc->priv = ir;
+	ir->rc->input_name = SUNXI_IR_DEV;
+	ir->rc->input_phys = "sunxi-ir/input0";
+	ir->rc->input_id.bustype = BUS_HOST;
+	ir->rc->input_id.vendor = 0x0001;
+	ir->rc->input_id.product = 0x0001;
+	ir->rc->input_id.version = 0x0100;
+	ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
+	ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
+	ir->rc->dev.parent = dev;
+	ir->rc->driver_type = RC_DRIVER_IR_RAW;
+	rc_set_allowed_protocols(ir->rc, RC_BIT_ALL);
+	ir->rc->rx_resolution = SUNXI_IR_SAMPLE;
+	ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
+	ir->rc->driver_name = SUNXI_IR_DEV;
+
+	ret = rc_register_device(ir->rc);
+	if (ret) {
+		dev_err(dev, "failed to register rc device\n");
+		ret = -EINVAL;
+		goto exit_free_dev;
+	}
+
+	platform_set_drvdata(pdev, ir);
+
+	/* Enable CIR Mode */
+	writel(0x3 << 4, ir->base+SUNXI_IR_CTL_REG);
+
+	/* Config IR Sample Register */
+	/* Fsample = clk */
+	tmp = 0;
+	/* Set Filter Threshold */
+	tmp |= (SUNXI_IR_RXFILT & 0x3f) << 2;
+	/* Set Idle Threshold */
+	tmp |= (SUNXI_IR_RXIDLE & 0xff) << 8;
+	writel(tmp, ir->base + SUNXI_IR_CIR_REG);
+
+	/* Invert Input Signal */
+	writel(0x1 << 2, ir->base + SUNXI_IR_RXCTL_REG);
+
+	/* Clear All Rx Interrupt Status */
+	writel(0xff, ir->base + SUNXI_IR_RXSTA_REG);
+
+	/* Enable IRQ on overflow, packet end, FIFO available with trigger
+	   level */
+	writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN |
+	       REG_RXINT_RAI_EN | REG_RXINT_RAL(TRIGGER_LEVEL - 1),
+	       ir->base + SUNXI_IR_RXINT_REG);
+
+	/* Enable IR Module */
+	tmp = readl(ir->base + SUNXI_IR_CTL_REG);
+
+	writel(tmp | 0x3, ir->base + SUNXI_IR_CTL_REG);
+
+	dev_info(dev, "initialized sunXi IR driver\n");
+	return 0;
+
+exit_free_dev:
+	rc_free_device(ir->rc);
+exit_clkdisable_clk:
+	clk_disable_unprepare(ir->clk);
+exit_clkdisable_apb_clk:
+	clk_disable_unprepare(ir->apb_clk);
+
+	return ret;
+}
+
+static int sunxi_ir_remove(struct platform_device *pdev)
+{
+	unsigned long flags;
+	struct sunxi_ir *ir = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(ir->clk);
+	clk_disable_unprepare(ir->apb_clk);
+
+	spin_lock_irqsave(&ir->ir_lock, flags);
+	/* disable IR IRQ */
+	writel(0, ir->base + SUNXI_IR_RXINT_REG);
+	/* clear All Rx Interrupt Status */
+	writel(0xff, ir->base + SUNXI_IR_RXSTA_REG);
+	/* disable IR */
+	writel(0, ir->base + SUNXI_IR_CTL_REG);
+	spin_unlock_irqrestore(&ir->ir_lock, flags);
+
+	rc_unregister_device(ir->rc);
+	return 0;
+}
+
+static const struct of_device_id sunxi_ir_match[] = {
+	{ .compatible = "allwinner,sun7i-a20-ir", },
+	{},
+};
+
+static struct platform_driver sunxi_ir_driver = {
+	.probe          = sunxi_ir_probe,
+	.remove         = sunxi_ir_remove,
+	.driver = {
+		.name = SUNXI_IR_DEV,
+		.owner = THIS_MODULE,
+		.of_match_table = sunxi_ir_match,
+	},
+};
+
+module_platform_driver(sunxi_ir_driver);
+
+MODULE_DESCRIPTION("Allwinner sunXi IR controller driver");
+MODULE_AUTHOR("Alexsey Shestacov <wingrime@linux-sunxi.org>");
+MODULE_LICENSE("GPL");
-- 
1.9.3

[PATCH v6 2/3] ARM: sunxi: Add driver for sunxi IR controller

[James Hogan]

Hi Alexander,

Just a few probe error handling suggestions...

On 13/05/14 19:39, Alexander Bersenev wrote:
> +static int sunxi_ir_probe(struct platform_device *pdev)
> +{
> +	int ret = 0;
> +	unsigned long tmp = 0;
> +
> +	struct device *dev = &pdev->dev;
> +	struct device_node *dn = dev->of_node;
> +	struct resource *res;
> +	struct sunxi_ir *ir;
> +
> +	ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
> +	if (!ir)
> +		return -ENOMEM;
> +
> +	/* Clock */
> +	ir->apb_clk = devm_clk_get(dev, "apb");
> +	if (IS_ERR(ir->apb_clk)) {
> +		dev_err(dev, "failed to get a apb clock.\n");
> +		return -EINVAL;

Does it make sense to return PTR_ERR(ir->apb_clk) here?

> +	}
> +	ir->clk = devm_clk_get(dev, "ir");
> +	if (IS_ERR(ir->clk)) {
> +		dev_err(dev, "failed to get a ir clock.\n");
> +		return -EINVAL;

and here

> +	}
> +
> +	ret = clk_set_rate(ir->clk, SUNXI_IR_BASE_CLK);
> +	if (ret) {
> +		dev_err(dev, "set ir base clock failed!\n");
> +		return -EINVAL;

return ret?

> +	}
> +
> +	if (clk_prepare_enable(ir->apb_clk)) {
> +		dev_err(dev, "try to enable apb_ir_clk failed\n");
> +		return -EINVAL;
> +	}
> +
> +	if (clk_prepare_enable(ir->clk)) {
> +		dev_err(dev, "try to enable ir_clk failed\n");
> +		ret = -EINVAL;
> +		goto exit_clkdisable_apb_clk;
> +	}
> +
> +	/* IO */
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> +	ir->base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(ir->base)) {
> +		dev_err(dev, "failed to map registers\n");
> +		ret = -ENOMEM;

PTR_ERR again?

> +		goto exit_clkdisable_clk;
> +	}
> +
> +	/* IRQ */
> +	ir->irq = platform_get_irq(pdev, 0);
> +	if (ir->irq < 0) {
> +		dev_err(dev, "no irq resource\n");
> +		ret = -EINVAL;

ret = ir->irq?

> +		goto exit_clkdisable_clk;
> +	}
> +
> +	ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
> +	if (ret) {
> +		dev_err(dev, "failed request irq\n");
> +		ret = -EINVAL;

necessary?

> +		goto exit_clkdisable_clk;
> +	}
> +
> +	ir->rc = rc_allocate_device();
> +
> +	if (!ir->rc) {
> +		dev_err(dev, "failed to allocate device\n");
> +		ret = -ENOMEM;
> +		goto exit_clkdisable_clk;
> +	}
> +
> +	ir->rc->priv = ir;
> +	ir->rc->input_name = SUNXI_IR_DEV;
> +	ir->rc->input_phys = "sunxi-ir/input0";
> +	ir->rc->input_id.bustype = BUS_HOST;
> +	ir->rc->input_id.vendor = 0x0001;
> +	ir->rc->input_id.product = 0x0001;
> +	ir->rc->input_id.version = 0x0100;
> +	ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
> +	ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
> +	ir->rc->dev.parent = dev;
> +	ir->rc->driver_type = RC_DRIVER_IR_RAW;
> +	rc_set_allowed_protocols(ir->rc, RC_BIT_ALL);
> +	ir->rc->rx_resolution = SUNXI_IR_SAMPLE;
> +	ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
> +	ir->rc->driver_name = SUNXI_IR_DEV;
> +
> +	ret = rc_register_device(ir->rc);
> +	if (ret) {
> +		dev_err(dev, "failed to register rc device\n");
> +		ret = -EINVAL;

same again

> +		goto exit_free_dev;
> +	}
> +

Cheers
James

[PATCH v6 3/3] ARM: sunxi: Add IR controller support in DT on A20

[Alexander Bersenev]

This patch adds IR controller in A20 Device-Tree:
- Two IR devices found in A20 user manual
- Pins for two devices
- One IR device physically found on Cubieboard 2
- One IR device physically found on Cubietruck

Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
---
 arch/arm/boot/dts/sun7i-a20-cubieboard2.dts |  6 ++++++
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts  |  6 ++++++
 arch/arm/boot/dts/sun7i-a20.dtsi            | 31 +++++++++++++++++++++++++++++
 3 files changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index feeff64..2564e8c 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -164,6 +164,12 @@
 				reg = <1>;
 			};
 		};
+
+		ir0: ir at 01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index e288562..e375e89 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -232,6 +232,12 @@
 				reg = <1>;
 			};
 		};
+
+		ir0: ir at 01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 0ae2b77..40ded74 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -724,6 +724,19 @@
 				allwinner,drive = <2>;
 				allwinner,pull = <0>;
 			};
+
+			ir0_pins_a: ir0 at 0 {
+				    allwinner,pins = "PB3","PB4";
+				    allwinner,function = "ir0";
+				    allwinner,drive = <0>;
+				    allwinner,pull = <0>;
+			};
+			ir1_pins_a: ir1 at 0 {
+				    allwinner,pins = "PB22","PB23";
+				    allwinner,function = "ir1";
+				    allwinner,drive = <0>;
+				    allwinner,pull = <0>;
+			};
 		};
 
 		timer at 01c20c00 {
@@ -937,5 +950,23 @@
 			#interrupt-cells = <3>;
 			interrupts = <1 9 0xf04>;
 		};
+
+		ir0: ir at 01c21800 {
+			compatible = "allwinner,sun7i-a20-ir";
+			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <0 5 4>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir at 01c21c00 {
+			compatible = "allwinner,sun7i-a20-ir";
+			clocks = <&apb0_gates 7>, <&ir1_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <0 6 4>;
+			reg = <0x01C21c00 0x40>;
+			status = "disabled";
+		};
 	};
 };
-- 
1.9.3

[PATCH v6 3/3] ARM: sunxi: Add IR controller support in DT on A20

[Maxime Ripard]

On Wed, May 14, 2014 at 12:39:02AM +0600, Alexander Bersenev wrote:
> This patch adds IR controller in A20 Device-Tree:
> - Two IR devices found in A20 user manual
> - Pins for two devices
> - One IR device physically found on Cubieboard 2
> - One IR device physically found on Cubietruck
> 
> Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
> Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
> ---
>  arch/arm/boot/dts/sun7i-a20-cubieboard2.dts |  6 ++++++
>  arch/arm/boot/dts/sun7i-a20-cubietruck.dts  |  6 ++++++
>  arch/arm/boot/dts/sun7i-a20.dtsi            | 31 +++++++++++++++++++++++++++++
>  3 files changed, 43 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> index feeff64..2564e8c 100644
> --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> @@ -164,6 +164,12 @@
>  				reg = <1>;
>  			};
>  		};
> +
> +		ir0: ir at 01c21800 {
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&ir0_pins_a>;
> +			status = "okay";
> +		};
>  	};
>  
>  	leds {
> diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> index e288562..e375e89 100644
> --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> @@ -232,6 +232,12 @@
>  				reg = <1>;
>  			};
>  		};
> +
> +		ir0: ir at 01c21800 {
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&ir0_pins_a>;
> +			status = "okay";
> +		};
>  	};
>  
>  	leds {

Please make these two changes a separate patch.

> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index 0ae2b77..40ded74 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -724,6 +724,19 @@
>  				allwinner,drive = <2>;
>  				allwinner,pull = <0>;
>  			};
> +
> +			ir0_pins_a: ir0 at 0 {
> +				    allwinner,pins = "PB3","PB4";
> +				    allwinner,function = "ir0";
> +				    allwinner,drive = <0>;
> +				    allwinner,pull = <0>;
> +			};

Extra line

> +			ir1_pins_a: ir1 at 0 {
> +				    allwinner,pins = "PB22","PB23";
> +				    allwinner,function = "ir1";
> +				    allwinner,drive = <0>;
> +				    allwinner,pull = <0>;
> +			};
>  		};

Do you use ir1_pins_a at all?

I also prefer whenever such additions are in a patch of their own.

>  		timer at 01c20c00 {
> @@ -937,5 +950,23 @@
>  			#interrupt-cells = <3>;
>  			interrupts = <1 9 0xf04>;
>  		};
> +
> +		ir0: ir at 01c21800 {
> +			compatible = "allwinner,sun7i-a20-ir";
> +			clocks = <&apb0_gates 6>, <&ir0_clk>;
> +			clock-names = "apb", "ir";
> +			interrupts = <0 5 4>;
> +			reg = <0x01c21800 0x40>;
> +			status = "disabled";
> +		};
> +
> +		ir1: ir at 01c21c00 {
> +			compatible = "allwinner,sun7i-a20-ir";
> +			clocks = <&apb0_gates 7>, <&ir1_clk>;
> +			clock-names = "apb", "ir";
> +			interrupts = <0 6 4>;
> +			reg = <0x01C21c00 0x40>;

You're mixing upper and lower case letters here, please make it lower
case.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140514/b6ddd821/attachment.sig>

[PATCH v6 3/3] ARM: sunxi: Add IR controller support in DT on A20

[Hans de Goede]

Hi,

<snip>

On 05/13/2014 08:39 PM, Alexander Bersenev wrote:
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index 0ae2b77..40ded74 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -724,6 +724,19 @@
>  				allwinner,drive = <2>;
>  				allwinner,pull = <0>;
>  			};
> +
> +			ir0_pins_a: ir0 at 0 {
> +				    allwinner,pins = "PB3","PB4";
> +				    allwinner,function = "ir0";
> +				    allwinner,drive = <0>;
> +				    allwinner,pull = <0>;
> +			};
> +			ir1_pins_a: ir1 at 0 {
> +				    allwinner,pins = "PB22","PB23";
> +				    allwinner,function = "ir1";
> +				    allwinner,drive = <0>;
> +				    allwinner,pull = <0>;
> +			};
>  		};
>  
>  		timer at 01c20c00 {
> @@ -937,5 +950,23 @@
>  			#interrupt-cells = <3>;
>  			interrupts = <1 9 0xf04>;
>  		};
> +
> +		ir0: ir at 01c21800 {
> +			compatible = "allwinner,sun7i-a20-ir";
> +			clocks = <&apb0_gates 6>, <&ir0_clk>;
> +			clock-names = "apb", "ir";
> +			interrupts = <0 5 4>;
> +			reg = <0x01c21800 0x40>;
> +			status = "disabled";
> +		};
> +
> +		ir1: ir at 01c21c00 {
> +			compatible = "allwinner,sun7i-a20-ir";
> +			clocks = <&apb0_gates 7>, <&ir1_clk>;
> +			clock-names = "apb", "ir";
> +			interrupts = <0 6 4>;
> +			reg = <0x01C21c00 0x40>;
> +			status = "disabled";
> +		};
>  	};
>  };
> 

The entries in the soc block are sorted by register address, so please
don't add these at the end, instead keep things sorted.

Regards,

Hans