From mboxrd@z Thu Jan 1 00:00:00 1970 From: ta.omasab@gmail.com (Thomas Abraham) Date: Wed, 14 May 2014 06:41:09 +0530 Subject: [PATCH v4 1/8] cpufreq: cpufreq-cpu0: allow use of optional boost mode frequencies In-Reply-To: <1400029876-5830-1-git-send-email-thomas.ab@samsung.com> References: <1400029876-5830-1-git-send-email-thomas.ab@samsung.com> Message-ID: <1400029876-5830-2-git-send-email-thomas.ab@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Thomas Abraham Lookup for the optional boost-frequency property in cpu0 node and if available, enable support for boost mode frequencies. The frequencies usable in boost mode are determined while preparing the cpufreq table from the list of operating points available. Cc: Shawn Guo Cc: Lukasz Majewski Signed-off-by: Thomas Abraham --- .../devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 2 ++ drivers/cpufreq/Kconfig | 11 +++++++++++ drivers/cpufreq/cpufreq-cpu0.c | 5 +++++ 3 files changed, 18 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt index f055515..60f321a 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt @@ -19,6 +19,8 @@ Optional properties: - cooling-min-level: - cooling-max-level: Please refer to Documentation/devicetree/bindings/thermal/thermal.txt. +- boost-frequency: + Please refer to Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt Examples: diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 1fbe11f..0ca4485 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -194,6 +194,17 @@ config GENERIC_CPUFREQ_CPU0 If in doubt, say N. +config GENERIC_CPUFREQ_CPU0_BOOST + bool "Boost frequency support for generic CPU0 cpufreq driver" + depends on GENERIC_CPUFREQ_CPU0 + select CPU_FREQ_BOOST_SW + help + This enables support for software managed overclocking (BOOST). It + allows usage of special frequencies (those beyond the normal operating + frequencies). + + If in doubt, say N. + menu "x86 CPU frequency scaling drivers" depends on X86 source "drivers/cpufreq/Kconfig.x86" diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index 1bf6bba..e6c21a8 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -194,6 +194,11 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) transition_latency += ret * 1000; } +#ifdef CONFIG_GENERIC_CPUFREQ_CPU0_BOOST + if (of_find_property(cpu_dev->of_node, "boost-frequency", NULL)) + cpu0_cpufreq_driver.boost_supported = true; +#endif + ret = cpufreq_register_driver(&cpu0_cpufreq_driver); if (ret) { pr_err("failed register driver: %d\n", ret); -- 1.7.4.4