[PATCH] ARM: remove ARM710 specific assembler code

[pebolle@tiscali.nl (Paul Bolle)]

Support for ARM710 CPUs was removed in v3.5. But a few lines of ARM710
specific assembler code were left in the tree. Remove these too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
This minor cleanup was suggested by Arnd. This patch is mostly
guesswork, as I already told Arnd, since I have never touched ARM
assembler before (as far as I can remember). Untested too! And this does
need testing.

 arch/arm/mm/proc-arm720.S | 30 ------------------------------
 1 file changed, 30 deletions(-)

diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index d42c37f9f5bc..6699f91a6a0f 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -116,34 +116,6 @@ ENTRY(cpu_arm720_reset)
 ENDPROC(cpu_arm720_reset)
 		.popsection
 
-	.type	__arm710_setup, #function
-__arm710_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0		@ invalidate caches
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7, 0		@ flush TLB (v4)
-#endif
-	mrc	p15, 0, r0, c1, c0		@ get control register
-	ldr	r5, arm710_cr1_clear
-	bic	r0, r0, r5
-	ldr	r5, arm710_cr1_set
-	orr	r0, r0, r5
-	mov	pc, lr				@ __ret (head.S)
-	.size	__arm710_setup, . - __arm710_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * .... 0001 ..11 1101
-	 * 
-	 */
-	.type	arm710_cr1_clear, #object
-	.type	arm710_cr1_set, #object
-arm710_cr1_clear:
-	.word	0x0f3f
-arm710_cr1_set:
-	.word	0x013d
-
 	.type	__arm720_setup, #function
 __arm720_setup:
 	mov	r0, #0
@@ -177,7 +149,6 @@ arm720_crval:
 
 	string	cpu_arch_name, "armv4t"
 	string	cpu_elf_name, "v4"
-	string	cpu_arm710_name, "ARM710T"
 	string	cpu_arm720_name, "ARM720T"
 
 		.align
@@ -215,5 +186,4 @@ __\name\()_proc_info:
 		.size	__\name\()_proc_info, . - __\name\()_proc_info
 .endm
 
-	arm720_proc_info arm710, 0x41807100, 0xffffff00, cpu_arm710_name, __arm710_setup
 	arm720_proc_info arm720, 0x41807200, 0xffffff00, cpu_arm720_name, __arm720_setup
-- 
1.9.0