* [PATCH] [RFC] ARM: perf: allow tracing with kernel tracepoints events @ 2014-05-16 15:01 Jean Pihet 2014-05-19 15:39 ` Will Deacon 0 siblings, 1 reply; 10+ messages in thread From: Jean Pihet @ 2014-05-16 15:01 UTC (permalink / raw) To: linux-arm-kernel When tracing with tracepoints events the IP and CPSR are set to 0, preventing the perf code to resolve the symbols: ./perf record -e kmem:kmalloc cal [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.007 MB perf.data (~321 samples) ] ./perf report Overhead Command Shared Object Symbol ........ ....... ............. ........... 40.78% cal [unknown] [.]00000000 31.6% cal [unknown] [.]00000000 The examination of the gathered samples (perf report -D) shows the IP is set to 0 and that the samples are considered as user space samples, while the IP should be set from the registers and the samples should be considered as kernel samples. The fix is to implement perf_arch_fetch_caller_regs for ARM, which fills the necessary registers: ip, lr, sp and cpsr (used to check the user mode property of the samples). Heavily inspired from arch/arm/include/asm/kexec.h. Reported by Sneha Priya on linaro-dev, cf. http://lists.linaro.org/pipermail/linaro-dev/2014-May/017151.html Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Reported-by: Sneha Priya <sneha.cse@hotmail.com> --- arch/arm/include/asm/perf_event.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 7558775..d466e39 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -26,6 +26,19 @@ struct pt_regs; extern unsigned long perf_instruction_pointer(struct pt_regs *regs); extern unsigned long perf_misc_flags(struct pt_regs *regs); #define perf_misc_flags(regs) perf_misc_flags(regs) + +#define perf_arch_fetch_caller_regs(regs, __ip) { \ + instruction_pointer(regs)= (__ip); \ + __asm__ __volatile__ ( \ + "mov %[_ARM_sp], sp\n\t" \ + "str lr, %[_ARM_lr]\n\t" \ + "mrs %[_ARM_cpsr], cpsr\n\t" \ + : [_ARM_cpsr] "=r" (regs->ARM_cpsr), \ + [_ARM_sp] "=r" (regs->ARM_sp), \ + [_ARM_lr] "=o" (regs->ARM_lr) \ + : : "memory" \ + ); \ +} #endif #endif /* __ARM_PERF_EVENT_H__ */ -- 1.8.1.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH] [RFC] ARM: perf: allow tracing with kernel tracepoints events 2014-05-16 15:01 [PATCH] [RFC] ARM: perf: allow tracing with kernel tracepoints events Jean Pihet @ 2014-05-19 15:39 ` Will Deacon 2014-05-19 15:58 ` Jean Pihet 0 siblings, 1 reply; 10+ messages in thread From: Will Deacon @ 2014-05-19 15:39 UTC (permalink / raw) To: linux-arm-kernel Hi Jean, On Fri, May 16, 2014 at 04:01:16PM +0100, Jean Pihet wrote: > When tracing with tracepoints events the IP and CPSR are set to 0, > preventing the perf code to resolve the symbols: > > ./perf record -e kmem:kmalloc cal > [ perf record: Woken up 1 times to write data ] > [ perf record: Captured and wrote 0.007 MB perf.data (~321 samples) ] > > ./perf report > Overhead Command Shared Object Symbol > ........ ....... ............. ........... > 40.78% cal [unknown] [.]00000000 > 31.6% cal [unknown] [.]00000000 > > The examination of the gathered samples (perf report -D) shows the IP > is set to 0 and that the samples are considered as user space samples, > while the IP should be set from the registers and the samples should be > considered as kernel samples. > > The fix is to implement perf_arch_fetch_caller_regs for ARM, which > fills the necessary registers: ip, lr, sp and cpsr (used to check > the user mode property of the samples). > > Heavily inspired from arch/arm/include/asm/kexec.h. > > Reported by Sneha Priya on linaro-dev, cf. > http://lists.linaro.org/pipermail/linaro-dev/2014-May/017151.html > > Signed-off-by: Jean Pihet <jean.pihet@linaro.org> > Cc: Will Deacon <will.deacon@arm.com> > Reported-by: Sneha Priya <sneha.cse@hotmail.com> > --- > arch/arm/include/asm/perf_event.h | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h > index 7558775..d466e39 100644 > --- a/arch/arm/include/asm/perf_event.h > +++ b/arch/arm/include/asm/perf_event.h > @@ -26,6 +26,19 @@ struct pt_regs; > extern unsigned long perf_instruction_pointer(struct pt_regs *regs); > extern unsigned long perf_misc_flags(struct pt_regs *regs); > #define perf_misc_flags(regs) perf_misc_flags(regs) > + > +#define perf_arch_fetch_caller_regs(regs, __ip) { \ > + instruction_pointer(regs)= (__ip); \ > + __asm__ __volatile__ ( \ > + "mov %[_ARM_sp], sp\n\t" \ > + "str lr, %[_ARM_lr]\n\t" \ > + "mrs %[_ARM_cpsr], cpsr\n\t" \ > + : [_ARM_cpsr] "=r" (regs->ARM_cpsr), \ > + [_ARM_sp] "=r" (regs->ARM_sp), \ > + [_ARM_lr] "=o" (regs->ARM_lr) \ > + : : "memory" \ > + ); \ > +} Why do we need to save lr? If it's for unwinding, what about fp? Also, why do you have a "memory" clobber and why is this block marked volatile? Will ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] [RFC] ARM: perf: allow tracing with kernel tracepoints events 2014-05-19 15:39 ` Will Deacon @ 2014-05-19 15:58 ` Jean Pihet 2014-06-17 17:11 ` [PATCH] " Jean Pihet 0 siblings, 1 reply; 10+ messages in thread From: Jean Pihet @ 2014-05-19 15:58 UTC (permalink / raw) To: linux-arm-kernel Hi Will, On 19 May 2014 17:39, Will Deacon <will.deacon@arm.com> wrote: > Hi Jean, > > On Fri, May 16, 2014 at 04:01:16PM +0100, Jean Pihet wrote: >> When tracing with tracepoints events the IP and CPSR are set to 0, >> preventing the perf code to resolve the symbols: >> >> ./perf record -e kmem:kmalloc cal >> [ perf record: Woken up 1 times to write data ] >> [ perf record: Captured and wrote 0.007 MB perf.data (~321 samples) ] >> >> ./perf report >> Overhead Command Shared Object Symbol >> ........ ....... ............. ........... >> 40.78% cal [unknown] [.]00000000 >> 31.6% cal [unknown] [.]00000000 >> >> The examination of the gathered samples (perf report -D) shows the IP >> is set to 0 and that the samples are considered as user space samples, >> while the IP should be set from the registers and the samples should be >> considered as kernel samples. >> >> The fix is to implement perf_arch_fetch_caller_regs for ARM, which >> fills the necessary registers: ip, lr, sp and cpsr (used to check >> the user mode property of the samples). >> >> Heavily inspired from arch/arm/include/asm/kexec.h. >> >> Reported by Sneha Priya on linaro-dev, cf. >> http://lists.linaro.org/pipermail/linaro-dev/2014-May/017151.html >> >> Signed-off-by: Jean Pihet <jean.pihet@linaro.org> >> Cc: Will Deacon <will.deacon@arm.com> >> Reported-by: Sneha Priya <sneha.cse@hotmail.com> >> --- >> arch/arm/include/asm/perf_event.h | 13 +++++++++++++ >> 1 file changed, 13 insertions(+) >> >> diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h >> index 7558775..d466e39 100644 >> --- a/arch/arm/include/asm/perf_event.h >> +++ b/arch/arm/include/asm/perf_event.h >> @@ -26,6 +26,19 @@ struct pt_regs; >> extern unsigned long perf_instruction_pointer(struct pt_regs *regs); >> extern unsigned long perf_misc_flags(struct pt_regs *regs); >> #define perf_misc_flags(regs) perf_misc_flags(regs) >> + >> +#define perf_arch_fetch_caller_regs(regs, __ip) { \ >> + instruction_pointer(regs)= (__ip); \ >> + __asm__ __volatile__ ( \ >> + "mov %[_ARM_sp], sp\n\t" \ >> + "str lr, %[_ARM_lr]\n\t" \ >> + "mrs %[_ARM_cpsr], cpsr\n\t" \ >> + : [_ARM_cpsr] "=r" (regs->ARM_cpsr), \ >> + [_ARM_sp] "=r" (regs->ARM_sp), \ >> + [_ARM_lr] "=o" (regs->ARM_lr) \ >> + : : "memory" \ >> + ); \ >> +} > > Why do we need to save lr? If it's for unwinding, what about fp? Also, why > do you have a "memory" clobber and why is this block marked volatile? These are all valid questions, hence the RFC state of the patch. Here is the comment about the marco from include/linux/perf_event.h: /* * Take a snapshot of the regs. Skip ip and frame pointer to * the nth caller. We only need a few of the regs: * - ip for PERF_SAMPLE_IP * - cs for user_mode() tests * - bp for callchains * - eflags, for future purposes, just in case */ static inline void perf_fetch_caller_regs(struct pt_regs *regs) ... So, is it OK to provide a version that saves ip, cpsr (for user_mode()), lr and fp (for callchain)? The clobber and volatile are from my copy/paste from the kexec code. The memory clobber is there because we are touching the regs struct in memory. Just tell me if those are overkill, I will remove them. Thanks for reviewing, Jean > > Will ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] ARM: perf: allow tracing with kernel tracepoints events 2014-05-19 15:58 ` Jean Pihet @ 2014-06-17 17:11 ` Jean Pihet 2014-06-18 12:53 ` Will Deacon 0 siblings, 1 reply; 10+ messages in thread From: Jean Pihet @ 2014-06-17 17:11 UTC (permalink / raw) To: linux-arm-kernel When tracing with tracepoints events the IP and CPSR are set to 0, preventing the perf code to resolve the symbols: ./perf record -e kmem:kmalloc cal [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.007 MB perf.data (~321 samples) ] ./perf report Overhead Command Shared Object Symbol ........ ....... ............. ........... 40.78% cal [unknown] [.]00000000 31.6% cal [unknown] [.]00000000 The examination of the gathered samples (perf report -D) shows the IP is set to 0 and that the samples are considered as user space samples, while the IP should be set from the registers and the samples should be considered as kernel samples. The fix is to implement perf_arch_fetch_caller_regs for ARM, which fills the necessary registers used for the callchain unwinding and to determine the user/kernel space property of the samples: ip, sp, fp and cpsr. Tested with perf record and tracepoints filtering (-e <tracepoint>), with unwinding using fp (--call-graph fp) and dwarf info (--call-graph dwarf). Reported by Sneha Priya on linaro-dev, cf. http://lists.linaro.org/pipermail/linaro-dev/2014-May/017151.html Signed-off-by: Jean Pihet <jean.pihet@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Reported-by: Sneha Priya <sneha.cse@hotmail.com> --- arch/arm/include/asm/perf_event.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 7558775..5e31d46 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -26,6 +26,25 @@ struct pt_regs; extern unsigned long perf_instruction_pointer(struct pt_regs *regs); extern unsigned long perf_misc_flags(struct pt_regs *regs); #define perf_misc_flags(regs) perf_misc_flags(regs) + +/* + * Take a snapshot of the regs. + * We only need a few of the regs: + * - ip for PERF_SAMPLE_IP + * - sp, fp for callchains + * - cpsr for user_mode() tests + */ +#define perf_arch_fetch_caller_regs(regs, __ip) { \ + instruction_pointer(regs)= (__ip); \ + __asm__ ( \ + "mov %[_ARM_sp], sp \n\t" \ + "mov %[_ARM_fp], fp \n\t" \ + "mrs %[_ARM_cpsr], cpsr \n\t" \ + : [_ARM_sp] "=r" (regs->ARM_sp), \ + [_ARM_fp] "=r" (regs->ARM_fp), \ + [_ARM_cpsr] "=r" (regs->ARM_cpsr) \ + ); \ +} #endif #endif /* __ARM_PERF_EVENT_H__ */ -- 1.8.1.2 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH] ARM: perf: allow tracing with kernel tracepoints events 2014-06-17 17:11 ` [PATCH] " Jean Pihet @ 2014-06-18 12:53 ` Will Deacon 2014-06-20 8:10 ` Jean Pihet 0 siblings, 1 reply; 10+ messages in thread From: Will Deacon @ 2014-06-18 12:53 UTC (permalink / raw) To: linux-arm-kernel Hi Jean, On Tue, Jun 17, 2014 at 06:11:05PM +0100, Jean Pihet wrote: > When tracing with tracepoints events the IP and CPSR are set to 0, > preventing the perf code to resolve the symbols: > > ./perf record -e kmem:kmalloc cal > [ perf record: Woken up 1 times to write data ] > [ perf record: Captured and wrote 0.007 MB perf.data (~321 samples) ] > > ./perf report > Overhead Command Shared Object Symbol > ........ ....... ............. ........... > 40.78% cal [unknown] [.]00000000 > 31.6% cal [unknown] [.]00000000 > > The examination of the gathered samples (perf report -D) shows the IP > is set to 0 and that the samples are considered as user space samples, > while the IP should be set from the registers and the samples should be > considered as kernel samples. > > The fix is to implement perf_arch_fetch_caller_regs for ARM, which > fills the necessary registers used for the callchain unwinding and > to determine the user/kernel space property of the samples: ip, sp, fp > and cpsr. Surely its only the CPSR that identifies whether it's user or kernel? > Tested with perf record and tracepoints filtering (-e <tracepoint>), with > unwinding using fp (--call-graph fp) and dwarf info (--call-graph dwarf). Whilst the old ACPS unwinding only needs PC, FP and SP, is this definitely true for exidx and DWARF-based unwinding? Given that libunwind ends up running a state machine for the latter, can we guarantee that we won't hit instructions that require access to other general purpose registers? Will ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] ARM: perf: allow tracing with kernel tracepoints events 2014-06-18 12:53 ` Will Deacon @ 2014-06-20 8:10 ` Jean Pihet 2014-06-25 9:01 ` Will Deacon 0 siblings, 1 reply; 10+ messages in thread From: Jean Pihet @ 2014-06-20 8:10 UTC (permalink / raw) To: linux-arm-kernel Hi Will, On 18 June 2014 14:53, Will Deacon <will.deacon@arm.com> wrote: > Hi Jean, > > On Tue, Jun 17, 2014 at 06:11:05PM +0100, Jean Pihet wrote: >> When tracing with tracepoints events the IP and CPSR are set to 0, >> preventing the perf code to resolve the symbols: >> >> ./perf record -e kmem:kmalloc cal >> [ perf record: Woken up 1 times to write data ] >> [ perf record: Captured and wrote 0.007 MB perf.data (~321 samples) ] >> >> ./perf report >> Overhead Command Shared Object Symbol >> ........ ....... ............. ........... >> 40.78% cal [unknown] [.]00000000 >> 31.6% cal [unknown] [.]00000000 >> >> The examination of the gathered samples (perf report -D) shows the IP >> is set to 0 and that the samples are considered as user space samples, >> while the IP should be set from the registers and the samples should be >> considered as kernel samples. >> >> The fix is to implement perf_arch_fetch_caller_regs for ARM, which >> fills the necessary registers used for the callchain unwinding and >> to determine the user/kernel space property of the samples: ip, sp, fp >> and cpsr. > > Surely its only the CPSR that identifies whether it's user or kernel? Yes, user_mode() is used to determine the user/kernel property of the samples. user_mode is defined as (((regs)->ARM_cpsr & 0xf) == 0) in ptrace.h. > >> Tested with perf record and tracepoints filtering (-e <tracepoint>), with >> unwinding using fp (--call-graph fp) and dwarf info (--call-graph dwarf). > > Whilst the old ACPS unwinding only needs PC, FP and SP, is this definitely > true for exidx and DWARF-based unwinding? Given that libunwind ends up > running a state machine for the latter, can we guarantee that we won't hit > instructions that require access to other general purpose registers? Yes. dwarf unwinding does not need anything extra. Once seeded all the rest is extracted from the dwarf trace info. I am currently stress testing the change, let me come back to you with the results. Thx, Jean > > Will ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] ARM: perf: allow tracing with kernel tracepoints events 2014-06-20 8:10 ` Jean Pihet @ 2014-06-25 9:01 ` Will Deacon 2014-06-25 14:54 ` Jean Pihet 0 siblings, 1 reply; 10+ messages in thread From: Will Deacon @ 2014-06-25 9:01 UTC (permalink / raw) To: linux-arm-kernel On Fri, Jun 20, 2014 at 09:10:35AM +0100, Jean Pihet wrote: > Hi Will, Hi Jean, > On 18 June 2014 14:53, Will Deacon <will.deacon@arm.com> wrote: > > On Tue, Jun 17, 2014 at 06:11:05PM +0100, Jean Pihet wrote: > >> Tested with perf record and tracepoints filtering (-e <tracepoint>), with > >> unwinding using fp (--call-graph fp) and dwarf info (--call-graph dwarf). > > > > Whilst the old ACPS unwinding only needs PC, FP and SP, is this definitely > > true for exidx and DWARF-based unwinding? Given that libunwind ends up > > running a state machine for the latter, can we guarantee that we won't hit > > instructions that require access to other general purpose registers? > Yes. dwarf unwinding does not need anything extra. Once seeded all the > rest is extracted from the dwarf trace info. Ok, but what if the LR isn't saved on the stack, for example? What if the code you're trying to unwind is hand-written assembly annotated with CFI directives? Will ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] ARM: perf: allow tracing with kernel tracepoints events 2014-06-25 9:01 ` Will Deacon @ 2014-06-25 14:54 ` Jean Pihet 2014-06-26 9:00 ` Will Deacon 0 siblings, 1 reply; 10+ messages in thread From: Jean Pihet @ 2014-06-25 14:54 UTC (permalink / raw) To: linux-arm-kernel Hi Will, On 25 June 2014 11:01, Will Deacon <will.deacon@arm.com> wrote: > On Fri, Jun 20, 2014 at 09:10:35AM +0100, Jean Pihet wrote: >> Hi Will, > > Hi Jean, > >> On 18 June 2014 14:53, Will Deacon <will.deacon@arm.com> wrote: >> > On Tue, Jun 17, 2014 at 06:11:05PM +0100, Jean Pihet wrote: >> >> Tested with perf record and tracepoints filtering (-e <tracepoint>), with >> >> unwinding using fp (--call-graph fp) and dwarf info (--call-graph dwarf). >> > >> > Whilst the old ACPS unwinding only needs PC, FP and SP, is this definitely >> > true for exidx and DWARF-based unwinding? Given that libunwind ends up >> > running a state machine for the latter, can we guarantee that we won't hit >> > instructions that require access to other general purpose registers? >> Yes. dwarf unwinding does not need anything extra. Once seeded all the >> rest is extracted from the dwarf trace info. > > Ok, but what if the LR isn't saved on the stack, for example? What if the > code you're trying to unwind is hand-written assembly annotated with CFI > directives? Then in that case the unwinding is not possible unless the hand-crafted asm is compatible with the requested unwinding method (fp, dwarf etc.). Do you expect problems there, if so can you give more details? > > Will Jean ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] ARM: perf: allow tracing with kernel tracepoints events 2014-06-25 14:54 ` Jean Pihet @ 2014-06-26 9:00 ` Will Deacon 2014-06-27 14:53 ` Jean Pihet 0 siblings, 1 reply; 10+ messages in thread From: Will Deacon @ 2014-06-26 9:00 UTC (permalink / raw) To: linux-arm-kernel On Wed, Jun 25, 2014 at 03:54:14PM +0100, Jean Pihet wrote: > Hi Will, Hello, > On 25 June 2014 11:01, Will Deacon <will.deacon@arm.com> wrote: > > On Fri, Jun 20, 2014 at 09:10:35AM +0100, Jean Pihet wrote: > >> On 18 June 2014 14:53, Will Deacon <will.deacon@arm.com> wrote: > >> > On Tue, Jun 17, 2014 at 06:11:05PM +0100, Jean Pihet wrote: > >> >> Tested with perf record and tracepoints filtering (-e <tracepoint>), with > >> >> unwinding using fp (--call-graph fp) and dwarf info (--call-graph dwarf). > >> > > >> > Whilst the old ACPS unwinding only needs PC, FP and SP, is this definitely > >> > true for exidx and DWARF-based unwinding? Given that libunwind ends up > >> > running a state machine for the latter, can we guarantee that we won't hit > >> > instructions that require access to other general purpose registers? > >> Yes. dwarf unwinding does not need anything extra. Once seeded all the > >> rest is extracted from the dwarf trace info. > > > > Ok, but what if the LR isn't saved on the stack, for example? What if the > > code you're trying to unwind is hand-written assembly annotated with CFI > > directives? > Then in that case the unwinding is not possible unless the > hand-crafted asm is compatible with the requested unwinding method > (fp, dwarf etc.). Do you expect problems there, if so can you give > more details? To use a readily available AArch64 example, take a look at __kernel_gettimeofday in arch/arm64/kernel/vdso/gettimeofday.S It starts by moving the link register into x2, so that it can later call __do_get_tspec without clobbering it. Furthermore, it doesn't make use of the stack at all. How can you unwind that using your current code? Will ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] ARM: perf: allow tracing with kernel tracepoints events 2014-06-26 9:00 ` Will Deacon @ 2014-06-27 14:53 ` Jean Pihet 0 siblings, 0 replies; 10+ messages in thread From: Jean Pihet @ 2014-06-27 14:53 UTC (permalink / raw) To: linux-arm-kernel Hi Will, On 26 June 2014 11:00, Will Deacon <will.deacon@arm.com> wrote: > On Wed, Jun 25, 2014 at 03:54:14PM +0100, Jean Pihet wrote: >> Hi Will, > > Hello, > >> On 25 June 2014 11:01, Will Deacon <will.deacon@arm.com> wrote: >> > On Fri, Jun 20, 2014 at 09:10:35AM +0100, Jean Pihet wrote: >> >> On 18 June 2014 14:53, Will Deacon <will.deacon@arm.com> wrote: >> >> > On Tue, Jun 17, 2014 at 06:11:05PM +0100, Jean Pihet wrote: >> >> >> Tested with perf record and tracepoints filtering (-e <tracepoint>), with >> >> >> unwinding using fp (--call-graph fp) and dwarf info (--call-graph dwarf). >> >> > >> >> > Whilst the old ACPS unwinding only needs PC, FP and SP, is this definitely >> >> > true for exidx and DWARF-based unwinding? Given that libunwind ends up >> >> > running a state machine for the latter, can we guarantee that we won't hit >> >> > instructions that require access to other general purpose registers? >> >> Yes. dwarf unwinding does not need anything extra. Once seeded all the >> >> rest is extracted from the dwarf trace info. >> > >> > Ok, but what if the LR isn't saved on the stack, for example? What if the >> > code you're trying to unwind is hand-written assembly annotated with CFI >> > directives? >> Then in that case the unwinding is not possible unless the >> hand-crafted asm is compatible with the requested unwinding method >> (fp, dwarf etc.). Do you expect problems there, if so can you give >> more details? > > To use a readily available AArch64 example, take a look at > __kernel_gettimeofday in arch/arm64/kernel/vdso/gettimeofday.S > > It starts by moving the link register into x2, so that it can later call > __do_get_tspec without clobbering it. Furthermore, it doesn't make use of > the stack at all. > > How can you unwind that using your current code? That is interesting. In that case that particular function will not be seen in the call chain since lr, fp are the ones from the caller. I did not try on a real case, it would be nice to try it out, I can do that as soon as I am back on ARM64. Note: I was debugging a deadlock in perf doing call chain unwinding and tracepoint triggering. A new patch set is on its way. Thx & regards, Jean > > Will ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2014-06-27 14:53 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-05-16 15:01 [PATCH] [RFC] ARM: perf: allow tracing with kernel tracepoints events Jean Pihet 2014-05-19 15:39 ` Will Deacon 2014-05-19 15:58 ` Jean Pihet 2014-06-17 17:11 ` [PATCH] " Jean Pihet 2014-06-18 12:53 ` Will Deacon 2014-06-20 8:10 ` Jean Pihet 2014-06-25 9:01 ` Will Deacon 2014-06-25 14:54 ` Jean Pihet 2014-06-26 9:00 ` Will Deacon 2014-06-27 14:53 ` Jean Pihet
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).