linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: DRA752: add detection of SoC information
Date: Mon, 19 May 2014 10:27:11 -0500	[thread overview]
Message-ID: <1400513231-25092-1-git-send-email-nm@ti.com> (raw)

Currently the files in /sys/devices/soc0/ show no information about
DRA7. Few userspace programs do depend on this information to make SoC
specific support. So update logic to detect the relevant information and
provide to userspace.

Signed-off-by: Nishanth Menon <nm@ti.com>
---
based on v3.15-rc5

Test log: http://slexy.org/view/s2FDZatq6f

 arch/arm/mach-omap2/id.c  |   37 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/io.c  |    1 +
 arch/arm/mach-omap2/soc.h |    5 +++++
 3 files changed, 43 insertions(+)

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 157412e..71bf216 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -628,6 +628,41 @@ void __init omap5xxx_check_revision(void)
 	pr_info("%s %s\n", soc_name, soc_rev);
 }
 
+void __init dra7xxx_check_revision(void)
+{
+	u32 idcode;
+	u16 hawkeye;
+	u8 rev;
+
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0xff;
+	switch (hawkeye) {
+	case 0xb990:
+		switch (rev) {
+		case 0:
+			omap_revision = DRA752_REV_ES1_0;
+			break;
+		case 1:
+		default:
+			omap_revision = DRA752_REV_ES1_1;
+		}
+		break;
+
+	default:
+		/* Unknown default to latest silicon rev as default*/
+		pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",
+			__func__, idcode, hawkeye, rev);
+		omap_revision = DRA752_REV_ES1_1;
+	}
+
+	sprintf(soc_name, "DRA%03x", omap_rev() >> 16);
+	sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf,
+		(omap_rev() >> 8) & 0xf);
+
+	pr_info("%s %s\n", soc_name, soc_rev);
+}
+
 /*
  * Set up things for map_io and processor detection later on. Gets called
  * pretty much first thing from board init. For multi-omap, this gets
@@ -669,6 +704,8 @@ static const char * __init omap_get_family(void)
 		return kasprintf(GFP_KERNEL, "OMAP5");
 	else if (soc_is_am43xx())
 		return kasprintf(GFP_KERNEL, "AM43xx");
+	else if (soc_is_dra7xx())
+		return kasprintf(GFP_KERNEL, "DRA7");
 	else
 		return kasprintf(GFP_KERNEL, "Unknown");
 }
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index f14f9ac..4ec3b4a 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -693,6 +693,7 @@ void __init dra7xx_init_early(void)
 	omap_prm_base_init();
 	omap_cm_base_init();
 	omap44xx_prm_init();
+	dra7xxx_check_revision();
 	dra7xx_powerdomains_init();
 	dra7xx_clockdomains_init();
 	dra7xx_hwmod_init();
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 30abcc8..de2a34c 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -459,10 +459,15 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP5430_REV_ES2_0	(OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8))
 #define OMAP5432_REV_ES2_0	(OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8))
 
+#define DRA7XX_CLASS		0x07000000
+#define DRA752_REV_ES1_0	(DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8))
+#define DRA752_REV_ES1_1	(DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8))
+
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);
 void omap4xxx_check_revision(void);
 void omap5xxx_check_revision(void);
+void dra7xxx_check_revision(void);
 void omap3xxx_check_features(void);
 void ti81xx_check_features(void);
 void am33xx_check_features(void);
-- 
1.7.9.5

             reply	other threads:[~2014-05-19 15:27 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-19 15:27 Nishanth Menon [this message]
2014-05-20  0:34 ` [PATCH] ARM: DRA752: add detection of SoC information Tony Lindgren
2014-05-20  6:04 ` Rajendra Nayak
2014-05-20 11:20   ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1400513231-25092-1-git-send-email-nm@ti.com \
    --to=nm@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).