linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 0/6] arm: Add basic support for Mediatek Cortex-A7 SoCs
Date: Wed, 21 May 2014 18:26:17 +0200	[thread overview]
Message-ID: <1400689583-21119-1-git-send-email-matthias.bgg@gmail.com> (raw)

Fifth round for the Mediatek basic support patches.

I changed the compatible string to the first SoC known which integrates the
timer.

I kept the minimal machine file. The debate about it is ongoing and up to now
minimal machine files are not removed [0]. This file will probably disappear
when Robs patch [1] or a similar approach gets accepted.

[0] https://lkml.org/lkml/2014/4/23/833
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-November/208878.html

---
This patch set adds basic support for the Mediatek Cortex-A7 SoCs.
Support is quite basic, as the only component working up to now are the
timers.

The patch series is build against torvalds/master tree.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Changes for v5:
1. Clocksource timer
- Change the compatible string to mt6577

2. Timer DT bindings
- Change compatible string to mt6577


Changes for v4:
1. Clocksource timer
- use cpu_possible_mask

2. Timer DT bindings
- Delete comments about the frequency of the clocks
- Add clock-names for the input clocks

3. Basic SoC support
- add clock-names for the timer
- rename the label of the clocks nodes


Changes for v3:
1. Clocksource timer
- Set cpu_mask_all and irq in clock_event_device
- Use device private structure for driver specific values

2. Timer DT bindings
- Define order of the clock phandles
- Fix typos

3. Basic SoC support
- DTS: set gic to a15-gic
- DTS: order by physical address
- Remove call to dt_init function


Changes for v2:
1. Clocksource timer
- Delete unused parts for sched_clock_source
- Use irq_request instead of setup_irq
- Remove unused SMP parts
- Fix some style issues
- use of_address_to resource and request_mem_region
- delete use of named clock
- select CLKSRC_MMIO in driver Kconfig

2. DT bindings
- delete named clock bindings

3. Basic SoC support
- Clean-up Kconfig
- Add documentation of the SoC compatible property 
- DTS: rename SoC file to mt6589.dts
- DTS: Delete not present cache controller
- DTS: Add missing GICv2 properties
- DTS: Change clock names
- DTS: Add Aquaris5 board

4. Add earlyprintk
- patch droped until serial driver is available

5. Add support for Aquaris5 mobile phone

---

Matthias Brugger (6):
  clocksource: Add support for the Mediatek SoCs
  dt-bindings: add mtk-timer bindings
  vendor-prefixes: add prefix for Mediaktek Inc.
  arm: add basic support for Mediatek MT6589 boards
  dt-bindings: add documentation for Mediatek SoC
  arm: mediatek: add dts for Aquaris5 mobile phone

 .../devicetree/bindings/arm/mediatek-mt65xx.txt    |   8 +
 .../bindings/timer/mediatek,mtk-timer.txt          |  18 ++
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/Kconfig                                   |   2 +
 arch/arm/Makefile                                  |   1 +
 arch/arm/boot/dts/mt6589-aquaris5.dts              |  25 ++
 arch/arm/boot/dts/mt6589.dtsi                      |  94 ++++++++
 arch/arm/mach-mediatek/Kconfig                     |   6 +
 arch/arm/mach-mediatek/Makefile                    |   1 +
 arch/arm/mach-mediatek/mediatek.c                  |  32 +++
 drivers/clocksource/Kconfig                        |   4 +
 drivers/clocksource/Makefile                       |   1 +
 drivers/clocksource/mtk_timer.c                    | 263 +++++++++++++++++++++
 13 files changed, 456 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/mediatek-mt65xx.txt
 create mode 100644 Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
 create mode 100644 arch/arm/boot/dts/mt6589-aquaris5.dts
 create mode 100644 arch/arm/boot/dts/mt6589.dtsi
 create mode 100644 arch/arm/mach-mediatek/Kconfig
 create mode 100644 arch/arm/mach-mediatek/Makefile
 create mode 100644 arch/arm/mach-mediatek/mediatek.c
 create mode 100644 drivers/clocksource/mtk_timer.c

-- 
1.8.1.2

             reply	other threads:[~2014-05-21 16:26 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-21 16:26 Matthias Brugger [this message]
2014-05-21 16:26 ` [PATCH v5 1/6] clocksource: Add support for the Mediatek SoCs Matthias Brugger
2014-05-23 17:39   ` Daniel Lezcano
2014-05-21 16:26 ` [PATCH v5 2/6] dt-bindings: add mtk-timer bindings Matthias Brugger
2014-05-21 16:34   ` Sören Brinkmann
2014-05-21 16:54     ` Heiko Stübner
2014-05-21 16:53       ` Sören Brinkmann
2014-05-21 17:18         ` Heiko Stübner
2014-05-21 17:21           ` Sören Brinkmann
2014-05-21 16:26 ` [PATCH v5 3/6] vendor-prefixes: add prefix for Mediaktek Inc Matthias Brugger
2014-05-21 16:26 ` [PATCH v5 4/6] arm: add basic support for Mediatek MT6589 boards Matthias Brugger
2014-05-21 16:26 ` [PATCH v5 5/6] dt-bindings: add documentation for Mediatek SoC Matthias Brugger
2014-05-21 16:26 ` [PATCH v5 6/6] arm: mediatek: add dts for Aquaris5 mobile phone Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1400689583-21119-1-git-send-email-matthias.bgg@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).