From mboxrd@z Thu Jan 1 00:00:00 1970 From: daniel.lezcano@linaro.org (Daniel Lezcano) Date: Fri, 23 May 2014 12:31:41 +0200 Subject: [PATCH 61/71] clocksource: sh_tmu: Fix channel IRQ retrieval in legacy case In-Reply-To: <1400841111-6683-1-git-send-email-daniel.lezcano@linaro.org> References: <537F214C.8000700@linaro.org> <1400841111-6683-1-git-send-email-daniel.lezcano@linaro.org> Message-ID: <1400841111-6683-61-git-send-email-daniel.lezcano@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Laurent Pinchart In the legacy platform data case each TMU platform device handles a single channel with a single IRQ for the platform device. Retrieve the IRQ using the logical channel number instead of the hardware channel number. Signed-off-by: Laurent Pinchart Signed-off-by: Daniel Lezcano --- drivers/clocksource/sh_tmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 4ba2c0f..ec34095 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -498,7 +498,7 @@ static int sh_tmu_channel_setup(struct sh_tmu_channel *ch, unsigned int index, ch->base = tmu->mapbase + 8 + ch->index * 12; } - ch->irq = platform_get_irq(tmu->pdev, ch->index); + ch->irq = platform_get_irq(tmu->pdev, index); if (ch->irq < 0) { dev_err(&tmu->pdev->dev, "ch%u: failed to get irq\n", ch->index); -- 1.7.9.5