[PATCH 5/5] ARM: dts: imx51-babbage: Fix esdhc setup

[s.hauer@pengutronix.de (Sascha Hauer)]

- Move cd/wp pinctrl from the hog group to the esdhc groups
- use gpio for card detection / write protection on esdhc2 since
  the controller based detection does not work
- Fix cd gpio polarity for esdhc1. This is wrong and currently
  only works because the imx esdhc driver ignores the polarity.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/imx51-babbage.dts | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 9e9deb2..28d4553 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -134,15 +134,15 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	fsl,cd-controller;
-	fsl,wp-controller;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
@@ -300,10 +300,6 @@
 	imx51-babbage {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX51_PAD_GPIO1_0__SD1_CD     0x20d5
-				MX51_PAD_GPIO1_1__SD1_WP     0x20d5
-				MX51_PAD_GPIO1_5__GPIO1_5    0x100
-				MX51_PAD_GPIO1_6__GPIO1_6    0x100
 				MX51_PAD_EIM_A27__GPIO2_21   0x5
 				MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
 				MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
@@ -330,6 +326,8 @@
 
 		pinctrl_esdhc1: esdhc1grp {
 			fsl,pins = <
+				MX51_PAD_GPIO1_0__GPIO1_0		0x20d5
+				MX51_PAD_GPIO1_1__GPIO1_1		0x20d5
 				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
 				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
 				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
@@ -341,6 +339,8 @@
 
 		pinctrl_esdhc2: esdhc2grp {
 			fsl,pins = <
+				MX51_PAD_GPIO1_5__GPIO1_5		0x100
+				MX51_PAD_GPIO1_6__GPIO1_6		0x100
 				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
 				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
 				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-- 
2.0.0.rc0