* [PATCH] ARM: dts: pfla02: Add ethernet phy supply regulator
@ 2014-05-26 12:42 Philipp Zabel
2014-05-29 8:26 ` Shawn Guo
0 siblings, 1 reply; 3+ messages in thread
From: Philipp Zabel @ 2014-05-26 12:42 UTC (permalink / raw)
To: linux-arm-kernel
The 2.5V VDD_ETH_IO voltage supplied by the DA9063 LDO4 is used
to power the KSZ9031 PHY DVDDH input and to pull the necessary
pins (including bootstrap pins) high.
It also powers the i.MX6 NVCC_RGMII and NVCC_ENET inputs.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 56b38cd..2d1fd11 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -322,6 +322,7 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ phy-supply = <&vdd_eth_io_reg>;
status = "disabled";
};
--
2.0.0.rc2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] ARM: dts: pfla02: Add ethernet phy supply regulator
@ 2014-05-27 15:19 Philipp Zabel
0 siblings, 0 replies; 3+ messages in thread
From: Philipp Zabel @ 2014-05-27 15:19 UTC (permalink / raw)
To: linux-arm-kernel
The 2.5V VDD_ETH_IO voltage supplied by the DA9063 LDO4 is used
to power the KSZ9031 PHY DVDDH input and to pull the necessary
pins (including bootstrap pins) high.
It also powers the i.MX6 NVCC_RGMII and NVCC_ENET inputs.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index faa3494..2694aa8 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -301,6 +301,7 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ phy-supply = <&vdd_eth_io_reg>;
status = "disabled";
};
--
2.0.0.rc2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] ARM: dts: pfla02: Add ethernet phy supply regulator
2014-05-26 12:42 [PATCH] ARM: dts: pfla02: Add ethernet phy supply regulator Philipp Zabel
@ 2014-05-29 8:26 ` Shawn Guo
0 siblings, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2014-05-29 8:26 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, May 26, 2014 at 02:42:56PM +0200, Philipp Zabel wrote:
> The 2.5V VDD_ETH_IO voltage supplied by the DA9063 LDO4 is used
> to power the KSZ9031 PHY DVDDH input and to pull the necessary
> pins (including bootstrap pins) high.
> It also powers the i.MX6 NVCC_RGMII and NVCC_ENET inputs.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Applied, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-05-29 8:26 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-26 12:42 [PATCH] ARM: dts: pfla02: Add ethernet phy supply regulator Philipp Zabel
2014-05-29 8:26 ` Shawn Guo
-- strict thread matches above, loose matches on Subject: below --
2014-05-27 15:19 Philipp Zabel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).