From mboxrd@z Thu Jan  1 00:00:00 1970
From: thomas.ab@samsung.com (Thomas Abraham)
Date: Thu, 29 May 2014 20:08:39 +0530
Subject: [PATCH v5 2/2] Documentation: devicetree: Add boost-frequency binding
 to list boost mode frequency
In-Reply-To: <1401374319-4480-1-git-send-email-thomas.ab@samsung.com>
References: <1401374319-4480-1-git-send-email-thomas.ab@samsung.com>
Message-ID: <1401374319-4480-3-git-send-email-thomas.ab@samsung.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

From: Thomas Abraham <thomas.ab@samsung.com>

Add a new optional boost-frequency binding for specifying the frequencies
usable in boost mode.

Cc: Nishanth Menon <nm@ti.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 .../devicetree/bindings/cpufreq/cpufreq-boost.txt  |   38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
new file mode 100644
index 0000000..63ed0fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt
@@ -0,0 +1,38 @@
+* Device tree binding for CPU boost frequency (aka over-clocking)
+
+Certain CPU's can be operated in optional 'boost' mode (or sometimes referred as
+overclocking) in which the CPU can operate at frequencies which are not
+specified by the manufacturer as CPU's operating frequency.
+
+Optional Properties:
+- boost-frequencies: list of frequencies in KHz to be used only in boost mode.
+  This list should be a subset of frequencies listed in "operating-points"
+  property. Refer to Documentation/devicetree/bindings/power/opp.txt for
+  details about "operating-points" property.
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+
+			operating-points = <
+				1500000 1350000
+				1400000 1287500
+				1300000 1250000
+				1200000 1187500
+				1100000 1137500
+				1000000 1087500
+			>;
+			boost-frequencies = <1500000 1400000>;
+		};
+		cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
-- 
1.7.9.5