* [PATCH] ARM: qcom: Enable GSBI driver in defconfig
@ 2014-05-29 16:26 Kumar Gala
2014-05-30 17:28 ` Stephen Boyd
0 siblings, 1 reply; 3+ messages in thread
From: Kumar Gala @ 2014-05-29 16:26 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
arch/arm/configs/qcom_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index bfed753..42ebd72 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -131,6 +131,7 @@ CONFIG_RTC_CLASS=y
CONFIG_DMADEVICES=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_STAGING=y
+CONFIG_QCOM_GSBI=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] ARM: qcom: Enable GSBI driver in defconfig
2014-05-29 16:26 [PATCH] ARM: qcom: Enable GSBI driver in defconfig Kumar Gala
@ 2014-05-30 17:28 ` Stephen Boyd
2014-05-30 18:07 ` Kumar Gala
0 siblings, 1 reply; 3+ messages in thread
From: Stephen Boyd @ 2014-05-30 17:28 UTC (permalink / raw)
To: linux-arm-kernel
On 05/29/14 09:26, Kumar Gala wrote:
> Signed-off-by: Kumar Gala <galak@codeaurora.org>
> ---
> arch/arm/configs/qcom_defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
> index bfed753..42ebd72 100644
> --- a/arch/arm/configs/qcom_defconfig
> +++ b/arch/arm/configs/qcom_defconfig
> @@ -131,6 +131,7 @@ CONFIG_RTC_CLASS=y
> CONFIG_DMADEVICES=y
> CONFIG_QCOM_BAM_DMA=y
> CONFIG_STAGING=y
> +CONFIG_QCOM_GSBI=y
> CONFIG_COMMON_CLK_QCOM=y
> CONFIG_MSM_GCC_8660=y
> CONFIG_MSM_MMCC_8960=y
It would be good to do this in the multi-platform defconfig as well.
Otherwise users of that defconfig (i.e. khilman's boot tester) will
start failing to boot once the DT changes land.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] ARM: qcom: Enable GSBI driver in defconfig
2014-05-30 17:28 ` Stephen Boyd
@ 2014-05-30 18:07 ` Kumar Gala
0 siblings, 0 replies; 3+ messages in thread
From: Kumar Gala @ 2014-05-30 18:07 UTC (permalink / raw)
To: linux-arm-kernel
On May 30, 2014, at 12:28 PM, Stephen Boyd <sboyd@codeaurora.org> wrote:
> On 05/29/14 09:26, Kumar Gala wrote:
>> Signed-off-by: Kumar Gala <galak@codeaurora.org>
>> ---
>> arch/arm/configs/qcom_defconfig | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
>> index bfed753..42ebd72 100644
>> --- a/arch/arm/configs/qcom_defconfig
>> +++ b/arch/arm/configs/qcom_defconfig
>> @@ -131,6 +131,7 @@ CONFIG_RTC_CLASS=y
>> CONFIG_DMADEVICES=y
>> CONFIG_QCOM_BAM_DMA=y
>> CONFIG_STAGING=y
>> +CONFIG_QCOM_GSBI=y
>> CONFIG_COMMON_CLK_QCOM=y
>> CONFIG_MSM_GCC_8660=y
>> CONFIG_MSM_MMCC_8960=y
>
> It would be good to do this in the multi-platform defconfig as well.
> Otherwise users of that defconfig (i.e. khilman's boot tester) will
> start failing to boot once the DT changes land.
>
> ?
Will do after 3.16-rc1, as nothing Kevin is booting uses the GSBI.
Trying to decide if we should have some Kconfig dependency here.
- k
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-05-30 18:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-29 16:26 [PATCH] ARM: qcom: Enable GSBI driver in defconfig Kumar Gala
2014-05-30 17:28 ` Stephen Boyd
2014-05-30 18:07 ` Kumar Gala
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).