From: dianders@chromium.org (Doug Anderson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] clk: exynos5420: Keep aclk66_peric enabled during boot
Date: Thu, 29 May 2014 14:21:36 -0700 [thread overview]
Message-ID: <1401398496-4624-1-git-send-email-dianders@chromium.org> (raw)
Right now if you've got earlyprintk enabled on exynos5420-peach-pit
then you'll get a hang on boot. Here's why:
1. The i2c-s3c2410 driver will probe at subsys_initcall. It will
enable its clock and disable it. This is the clock "i2c2".
2. The act of disabling "i2c2" will disable its parents. In this case
the parent is "aclk66_peric". There are no other children of
"aclk66_peric" officially enabled, so "aclk66_peric" will be turned
off (despite being CLK_IGNORE_UNUSED, but that's by design).
3. The next time you try to earlyprintk you'll do so without the UART
clock enabled. That's because the UART clocks are also children of
"aclk66_peric". You'll hang.
There's no good place to put a clock enable for earlyprintk, which is
handled by a bunch of assembly code. The best we can do is to handle
this in the clock driver.
Signed-off-by: Doug Anderson <dianders@chromium.org>
---
drivers/clk/samsung/clk-exynos5420.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 9d7d7ee..1e586be 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -1172,11 +1172,17 @@ static struct of_device_id ext_clk_match[] __initdata = {
{ },
};
+/* Keep these clocks on until late_initcall */
+static const char *boot_clocks[] __initconst = {
+ "aclk66_peric",
+};
+
/* register exynos5420 clocks */
static void __init exynos5x_clk_init(struct device_node *np,
enum exynos5x_soc soc)
{
struct samsung_clk_provider *ctx;
+ int i;
if (np) {
reg_base = of_iomap(np, 0);
@@ -1226,6 +1232,12 @@ static void __init exynos5x_clk_init(struct device_node *np,
}
exynos5420_clk_sleep_init();
+
+ for (i = 0; i < ARRAY_SIZE(boot_clocks); i++) {
+ struct clk *to_enable = __clk_lookup(boot_clocks[i]);
+
+ clk_prepare_enable(to_enable);
+ }
}
static void __init exynos5420_clk_init(struct device_node *np)
@@ -1239,3 +1251,15 @@ static void __init exynos5800_clk_init(struct device_node *np)
exynos5x_clk_init(np, EXYNOS5800);
}
CLK_OF_DECLARE(exynos5800_clk, "samsung,exynos5800-clock", exynos5800_clk_init);
+
+static int __init exynos5420_clk_late_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(boot_clocks); i++) {
+ struct clk *to_disable = __clk_lookup(boot_clocks[i]);
+
+ clk_disable_unprepare(to_disable);
+ }
+}
+late_initcall(exynos5420_clk_late_init);
--
1.9.1.423.g4596e3a
next reply other threads:[~2014-05-29 21:21 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-29 21:21 Doug Anderson [this message]
2014-05-29 22:29 ` [PATCH] clk: exynos5420: Keep aclk66_peric enabled during boot Mike Turquette
2014-05-30 5:02 ` Tomasz Figa
2014-05-30 16:28 ` Doug Anderson
2014-05-30 14:00 ` Javier Martinez Canillas
2014-05-30 16:29 ` Doug Anderson
2014-05-30 16:32 ` [PATCH v2] " Doug Anderson
2014-06-05 18:48 ` Doug Anderson
2014-06-05 19:14 ` Tomasz Figa
2014-06-05 19:22 ` Doug Anderson
2014-06-05 19:31 ` Tomasz Figa
2014-06-05 20:10 ` Doug Anderson
2014-06-05 20:42 ` Doug Anderson
2014-06-05 20:35 ` [PATCH v3] clk: exynos5420: Remove aclk66_peric from the clock tree description Doug Anderson
2014-06-05 22:26 ` Tomasz Figa
2014-06-06 23:41 ` Mike Turquette
2014-06-09 18:56 ` Doug Anderson
2014-06-06 0:03 ` Mike Turquette
2014-06-06 0:46 ` Doug Anderson
2014-06-06 22:31 ` Mike Turquette
2014-06-06 23:19 ` Doug Anderson
2014-06-30 13:48 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401398496-4624-1-git-send-email-dianders@chromium.org \
--to=dianders@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).