[PATCH v2 00/11] ARM: Versatile irq and clock DT support

[PATCH v2 00/11] ARM: Versatile irq and clock DT support

[Rob Herring]

From: Rob Herring <robh@kernel.org>

This series is some preparation work to fully convert Versatile platform
to DT. This converts the IRQ initialization to DT based init and adds
clocks to the Versatile DT. This doesn't actually enable using common
clock framework, but that is only a matter of removing the old clock
code and enabling the appropriate Kconfig options. This will be done
when Versatile can be completely converted over to DT boot. I have that
working in my tree, but full DT conversion is also dependent on DT PCI
support.

For v2, the all users (i.e. Integrator) of irq-versatile-fpga are 
converted over to use IRQCHIP_DECLARE. The pass-thru feature setup is 
using the compatible string instead of adding a new property.

I've tested Versatile and Integrator under QEMU and Linus Walleij has 
tested an earlier version on Versatile AB h/w.

Linus, This could use testing again on Versatile.

Rob

Rob Herring (11):
  dts: versatile: add missing irq controller properties
  irqchip: versatile-fpga: Add IRQCHIP_DECLARE support
  irqchip: versatile-fpga: add support for arm,versatile-sic
  ARM: integrator: convert to use irqchip_init
  ARM: versatile: remove init_irq hook for DT boot
  dts: versatile: add pl180 compatible strings
  dt/bindings: arm-boards: add binding for Versatile core module
  dt/bindings: add compatible string for versatile osc clock
  ARM: timer-sp: allow getting timer1 clock from DT to fallback to
    legacy clock
  dts: versatile: add clock tree
  clk: versatile: add versatile OSC support

 Documentation/devicetree/bindings/arm/arm-boards   |  6 ++
 .../devicetree/bindings/clock/arm-integrator.txt   |  4 +-
 arch/arm/boot/dts/versatile-ab.dts                 | 81 +++++++++++++++++++++-
 arch/arm/boot/dts/versatile-pb.dts                 | 12 +++-
 arch/arm/common/timer-sp.c                         |  4 +-
 arch/arm/mach-integrator/integrator_ap.c           | 10 +--
 arch/arm/mach-integrator/integrator_cp.c           | 10 +--
 arch/arm/mach-versatile/versatile_dt.c             |  1 -
 drivers/clk/versatile/Makefile                     |  3 +-
 .../{clk-integrator.c => clk-versatile.c}          | 35 +++++++++-
 drivers/irqchip/irq-versatile-fpga.c               | 17 ++++-
 11 files changed, 155 insertions(+), 28 deletions(-)
 rename drivers/clk/versatile/{clk-integrator.c => clk-versatile.c} (66%)

-- 
1.9.1

[PATCH v2 01/11] dts: versatile: add missing irq controller properties

[Rob Herring]

From: Rob Herring <robh@kernel.org>

Add valid-mask and clear-mask properties to the versatile dts so the
platform code doing the same thing can be removed.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
v2:
- Drop the passthru-mask property

 arch/arm/boot/dts/versatile-ab.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index e01e5a0..5dc3be7 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -59,6 +59,8 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x1000>;
+			clear-mask = <0xffffffff>;
+			valid-mask = <0xffffffff>;
 		};
 
 		sic: intc at 10003000 {
@@ -68,6 +70,8 @@
 			reg = <0x10003000 0x1000>;
 			interrupt-parent = <&vic>;
 			interrupts = <31>; /* Cascaded to vic */
+			clear-mask = <0xffffffff>;
+			valid-mask = <0xffc203f8>;
 		};
 
 		dma at 10130000 {
-- 
1.9.1

[PATCH v2 02/11] irqchip: versatile-fpga: Add IRQCHIP_DECLARE support

[Rob Herring]

From: Rob Herring <robh@kernel.org>

Add support for initialization using IRQCHIP_DECLARE. This also requires
that the controller initialization set the handle_irq function pointer
itself when it is a primary controller.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
---
v2:
- New patch

 drivers/irqchip/irq-versatile-fpga.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c
index 3ae2bb8..8e0bb56 100644
--- a/drivers/irqchip/irq-versatile-fpga.c
+++ b/drivers/irqchip/irq-versatile-fpga.c
@@ -14,6 +14,8 @@
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
 
+#include "irqchip.h"
+
 #define IRQ_STATUS		0x00
 #define IRQ_RAW_STATUS		0x04
 #define IRQ_ENABLE_SET		0x08
@@ -201,8 +203,10 @@ int __init fpga_irq_of_init(struct device_node *node,
 
 	/* Some chips are cascaded from a parent IRQ */
 	parent_irq = irq_of_parse_and_map(node, 0);
-	if (!parent_irq)
+	if (!parent_irq) {
+		set_handle_irq(fpga_handle_irq);
 		parent_irq = -1;
+	}
 
 	fpga_irq_init(base, node->name, 0, parent_irq, valid_mask, node);
 
@@ -211,4 +215,5 @@ int __init fpga_irq_of_init(struct device_node *node,
 
 	return 0;
 }
+IRQCHIP_DECLARE(arm_fpga, "arm,versatile-fpga-irq", fpga_irq_of_init);
 #endif
-- 
1.9.1

[PATCH v2 03/11] irqchip: versatile-fpga: add support for arm, versatile-sic

[Rob Herring]

From: Rob Herring <robh@kernel.org>

The secondary controller on ARM Versatile AB and PB is similar to
other ARM platforms, but has a pass-thru register to connect some
interrupts directly to interrupt inputs on the primary interrupt
controller. The PIC_ENABLES register needs to be configured for
proper operation when the matching node is arm,versatile-sic. Add the
the necessary IRQCHIP_DECLARE as well.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Arnd Bergmann <arnd@arndb.de>
---
v2:
- Rework to use the compatible string for pass-thru register setup.

 drivers/irqchip/irq-versatile-fpga.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c
index 8e0bb56..90bf131 100644
--- a/drivers/irqchip/irq-versatile-fpga.c
+++ b/drivers/irqchip/irq-versatile-fpga.c
@@ -28,6 +28,8 @@
 #define FIQ_ENABLE_SET		0x28
 #define FIQ_ENABLE_CLEAR	0x2C
 
+#define PIC_ENABLES             0x20	/* set interrupt pass through bits */
+
 /**
  * struct fpga_irq_data - irq data container for the FPGA IRQ controller
  * @base: memory offset in virtual memory
@@ -213,7 +215,15 @@ int __init fpga_irq_of_init(struct device_node *node,
 	writel(clear_mask, base + IRQ_ENABLE_CLEAR);
 	writel(clear_mask, base + FIQ_ENABLE_CLEAR);
 
+	/*
+	 * On Versatile AB/PB, some secondary interrupts have a direct
+	 * pass-thru to the primary controller which need to be enabled.
+	 */
+	if (of_device_is_compatible(node, "arm,versatile-sic"))
+		writel(0xffd00000, base + PIC_ENABLES);
+
 	return 0;
 }
 IRQCHIP_DECLARE(arm_fpga, "arm,versatile-fpga-irq", fpga_irq_of_init);
+IRQCHIP_DECLARE(arm_fpga_sic, "arm,versatile-sic", fpga_irq_of_init);
 #endif
-- 
1.9.1

[PATCH v2 04/11] ARM: integrator: convert to use irqchip_init

[Rob Herring]

From: Rob Herring <robh@kernel.org>

Now that versatile-fpga irqchip has IRQCHIP_DECLARE support, the interrupt
related initialization can be removed.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
---
v2:
- New patch
 arch/arm/mach-integrator/integrator_ap.c | 10 ++--------
 arch/arm/mach-integrator/integrator_cp.c | 10 ++--------
 2 files changed, 4 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index dd0cc67..645da16 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -31,7 +31,7 @@
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/irqchip/versatile-fpga.h>
+#include <linux/irqchip.h>
 #include <linux/mtd/physmap.h>
 #include <linux/clk.h>
 #include <linux/platform_data/clk-integrator.h>
@@ -439,15 +439,10 @@ static void __init ap_of_timer_init(void)
 	integrator_clockevent_init(rate, base, irq);
 }
 
-static const struct of_device_id fpga_irq_of_match[] __initconst = {
-	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
-	{ /* Sentinel */ }
-};
-
 static void __init ap_init_irq_of(void)
 {
 	cm_init();
-	of_irq_init(fpga_irq_of_match);
+	irqchip_init();
 }
 
 /* For the Device Tree, add in the UART callbacks as AUXDATA */
@@ -570,7 +565,6 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
 	.map_io		= ap_map_io,
 	.init_early	= ap_init_early,
 	.init_irq	= ap_init_irq_of,
-	.handle_irq	= fpga_handle_irq,
 	.init_time	= ap_of_timer_init,
 	.init_machine	= ap_init_of,
 	.restart	= integrator_restart,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a938242..7ade590 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -20,7 +20,7 @@
 #include <linux/amba/clcd.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
-#include <linux/irqchip/versatile-fpga.h>
+#include <linux/irqchip.h>
 #include <linux/gfp.h>
 #include <linux/mtd/physmap.h>
 #include <linux/of_irq.h>
@@ -235,15 +235,10 @@ static void __init intcp_init_early(void)
 	sched_clock_register(intcp_read_sched_clock, 32, 24000000);
 }
 
-static const struct of_device_id fpga_irq_of_match[] __initconst = {
-	{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
-	{ /* Sentinel */ }
-};
-
 static void __init intcp_init_irq_of(void)
 {
 	cm_init();
-	of_irq_init(fpga_irq_of_match);
+	irqchip_init();
 }
 
 /*
@@ -340,7 +335,6 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
 	.map_io		= intcp_map_io,
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq_of,
-	.handle_irq	= fpga_handle_irq,
 	.init_machine	= intcp_init_of,
 	.restart	= integrator_restart,
 	.dt_compat      = intcp_dt_board_compat,
-- 
1.9.1

[PATCH v2 05/11] ARM: versatile: remove init_irq hook for DT boot

[Rob Herring]

From: Rob Herring <robh@kernel.org>

Now that versatile's irqchips are initialized from DT, the init_irq hook
can be removed.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
v2:
- no change
 arch/arm/mach-versatile/versatile_dt.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 3621b00..9f9bc61 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -44,7 +44,6 @@ static const char *versatile_dt_match[] __initconst = {
 DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
-	.init_irq	= versatile_init_irq,
 	.init_machine	= versatile_dt_init,
 	.dt_compat	= versatile_dt_match,
 	.restart	= versatile_restart,
-- 
1.9.1

[PATCH v2 06/11] dts: versatile: add pl180 compatible strings

[Rob Herring]

From: Rob Herring <robh@kernel.org>

While not needed for probing, add the "arm,pl180" compatible string for
completeness.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
v2:
- no change
 arch/arm/boot/dts/versatile-ab.dts | 2 +-
 arch/arm/boot/dts/versatile-pb.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 5dc3be7..85c7b2b 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -187,7 +187,7 @@
 				interrupts = <24>;
 			};
 			mmc at 5000 {
-				compatible = "arm,primecell";
+				compatible = "arm,pl180", "arm,primecell";
 				reg = < 0x5000 0x1000>;
 				interrupts-extended = <&vic 22 &sic 2>;
 			};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 65f6577..a428541 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -39,7 +39,7 @@
 				interrupts = <5>;
 			};
 			mmc at b000 {
-				compatible = "arm,primecell";
+				compatible = "arm,pl180", "arm,primecell";
 				reg = <0xb000 0x1000>;
 				interrupts-extended = <&vic 23 &sic 2>;
 			};
-- 
1.9.1

[PATCH v2 07/11] dt/bindings: arm-boards: add binding for Versatile core module

[Rob Herring]

From: Rob Herring <robh@kernel.org>

Add binding for the core module found on ARM versatile AB and PB boards.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
v2:
- no change
 Documentation/devicetree/bindings/arm/arm-boards | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index 3509707..c554ed3 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -86,3 +86,9 @@ Interrupt controllers:
 	compatible = "arm,versatile-sic";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+Required nodes:
+
+- core-module: the root node to the Versatile platforms must have
+  a core-module with regs and the compatible strings
+  "arm,core-module-versatile", "syscon"
-- 
1.9.1

[PATCH v2 08/11] dt/bindings: add compatible string for versatile osc clock

[Rob Herring]

From: Rob Herring <robh@kernel.org>

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
v2:
- no change

 Documentation/devicetree/bindings/clock/arm-integrator.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt
index 652914b..ecc6952 100644
--- a/Documentation/devicetree/bindings/clock/arm-integrator.txt
+++ b/Documentation/devicetree/bindings/clock/arm-integrator.txt
@@ -1,4 +1,4 @@
-Clock bindings for ARM Integrator Core Module clocks
+Clock bindings for ARM Integrator and Versatile Core Module clocks
 
 Auxilary Oscillator Clock
 
@@ -12,7 +12,7 @@ parent node.
 
 
 Required properties:
-- compatible: must be "arm,integrator-cm-auxosc"
+- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc"
 - #clock-cells: must be <0>
 
 Optional properties:
-- 
1.9.1

[PATCH v2 09/11] ARM: timer-sp: allow getting timer1 clock from DT to fallback to legacy clock

[Rob Herring]

From: Rob Herring <robh@kernel.org>

The sp804 clocks may be specified in DT, but the kernel may still be using
legacy clocks. This is handled if a single clock for sp804 is present,
but not when 3 clocks are present.

This prevents Versatile platforms from breaking when the DT has clocks
added.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
---
v2:
- New patch necessary to handle DT with 3 clocks in sp804 node and still
  use the legacy non-DT clocks.

 arch/arm/common/timer-sp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index fd6bff0..1921132 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -233,13 +233,13 @@ static void __init sp804_of_init(struct device_node *np)
 	if (IS_ERR(clk1))
 		clk1 = NULL;
 
-	/* Get the 2nd clock if the timer has 2 timer clocks */
+	/* Get the 2nd clock if the timer has 3 timer clocks */
 	if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) {
 		clk2 = of_clk_get(np, 1);
 		if (IS_ERR(clk2)) {
 			pr_err("sp804: %s clock not found: %d\n", np->name,
 				(int)PTR_ERR(clk2));
-			goto err;
+			clk2 = NULL;
 		}
 	} else
 		clk2 = clk1;
-- 
1.9.1

[PATCH v2 10/11] dts: versatile: add clock tree

[Rob Herring]

From: Rob Herring <robh@kernel.org>

The versatile dts is missing any clock data. Add the clocks.

It is not clear from the documentation where pclk comes from, so for
now it is a dummy clock which is sufficient for things to work.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
v2:
- Move and Rename crystal node.
- Define pclk as 24MHz based on Linus W's input
- fix timer to be 3 clocks and fix names
- Fix sspclk clock name

 arch/arm/boot/dts/versatile-ab.dts | 75 ++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/versatile-pb.dts | 10 +++++
 2 files changed, 85 insertions(+)

diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 85c7b2b..36c771a 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -19,6 +19,41 @@
 		reg = <0x0 0x08000000>;
 	};
 
+	xtal24mhz: xtal24mhz at 24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	core-module at 10000000 {
+		compatible = "arm,core-module-versatile", "syscon";
+		reg = <0x10000000 0x200>;
+
+		/* OSC1 on AB, OSC4 on PB */
+		osc1: cm_aux_osc at 24M {
+			#clock-cells = <0>;
+			compatible = "arm,versatile-cm-auxosc";
+			clocks = <&xtal24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: timclk at 1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+
+		pclk: pclk at 24M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
 	flash at 34000000 {
 		compatible = "arm,versatile-flash";
 		reg = <0x34000000 0x4000000>;
@@ -78,63 +113,85 @@
 			compatible = "arm,pl081", "arm,primecell";
 			reg = <0x10130000 0x1000>;
 			interrupts = <17>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		uart0: uart at 101f1000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f1000 0x1000>;
 			interrupts = <12>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		uart1: uart at 101f2000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f2000 0x1000>;
 			interrupts = <13>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		uart2: uart at 101f3000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f3000 0x1000>;
 			interrupts = <14>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		smc at 10100000 {
 			compatible = "arm,primecell";
 			reg = <0x10100000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		mpmc at 10110000 {
 			compatible = "arm,primecell";
 			reg = <0x10110000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		display at 10120000 {
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0x10120000 0x1000>;
 			interrupts = <16>;
+			clocks = <&osc1>, <&pclk>;
+			clock-names = "clcd", "apb_pclk";
 		};
 
 		sctl at 101e0000 {
 			compatible = "arm,primecell";
 			reg = <0x101e0000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		watchdog at 101e1000 {
 			compatible = "arm,primecell";
 			reg = <0x101e1000 0x1000>;
 			interrupts = <0>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		timer at 101e2000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x101e2000 0x1000>;
 			interrupts = <4>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
 		};
 
 		timer at 101e3000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x101e3000 0x1000>;
 			interrupts = <5>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
 		};
 
 		gpio0: gpio at 101e4000 {
@@ -145,6 +202,8 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpio1: gpio at 101e5000 {
@@ -155,24 +214,32 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		rtc at 101e8000 {
 			compatible = "arm,pl030", "arm,primecell";
 			reg = <0x101e8000 0x1000>;
 			interrupts = <10>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		sci at 101f0000 {
 			compatible = "arm,primecell";
 			reg = <0x101f0000 0x1000>;
 			interrupts = <15>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		ssp at 101f4000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
 		};
 
 		fpga {
@@ -185,23 +252,31 @@
 				compatible = "arm,primecell";
 				reg = <0x4000 0x1000>;
 				interrupts = <24>;
+				clocks = <&pclk>;
+				clock-names = "apb_pclk";
 			};
 			mmc at 5000 {
 				compatible = "arm,pl180", "arm,primecell";
 				reg = < 0x5000 0x1000>;
 				interrupts-extended = <&vic 22 &sic 2>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
 			};
 			kmi at 6000 {
 				compatible = "arm,pl050", "arm,primecell";
 				reg = <0x6000 0x1000>;
 				interrupt-parent = <&sic>;
 				interrupts = <3>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
 			};
 			kmi at 7000 {
 				compatible = "arm,pl050", "arm,primecell";
 				reg = <0x7000 0x1000>;
 				interrupt-parent = <&sic>;
 				interrupts = <4>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index a428541..d025048 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -13,6 +13,8 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		gpio3: gpio at 101e7000 {
@@ -23,6 +25,8 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
 		};
 
 		fpga {
@@ -31,17 +35,23 @@
 				reg = <0x9000 0x1000>;
 				interrupt-parent = <&sic>;
 				interrupts = <6>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "uartclk", "apb_pclk";
 			};
 			sci at a000 {
 				compatible = "arm,primecell";
 				reg = <0xa000 0x1000>;
 				interrupt-parent = <&sic>;
 				interrupts = <5>;
+				clocks = <&xtal24mhz>;
+				clock-names = "apb_pclk";
 			};
 			mmc at b000 {
 				compatible = "arm,pl180", "arm,primecell";
 				reg = <0xb000 0x1000>;
 				interrupts-extended = <&vic 23 &sic 2>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
 			};
 		};
 	};
-- 
1.9.1

[PATCH v2 11/11] clk: versatile: add versatile OSC support

[Rob Herring]

From: Rob Herring <robh@kernel.org>

Versatile platforms share the same OSC programming model as Integrator
platforms. Add the necessary parameters and init functions for Versatile.

Renaming the file to clk-versatile.c as versatile is used as the family
name for ARM, Ltd. boards.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Mike Turquette <mturquette@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
v2:
- Rename clk-integrator.c to clk-versatile.c

 drivers/clk/versatile/Makefile                     |  3 +-
 .../{clk-integrator.c => clk-versatile.c}          | 35 ++++++++++++++++++++--
 2 files changed, 34 insertions(+), 4 deletions(-)
 rename drivers/clk/versatile/{clk-integrator.c => clk-versatile.c} (66%)

diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index c16ca78..9ee2b37 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -1,6 +1,5 @@
 # Makefile for Versatile-specific clocks
-obj-$(CONFIG_ICST)		+= clk-icst.o
-obj-$(CONFIG_ARCH_INTEGRATOR)	+= clk-integrator.o
+obj-$(CONFIG_ICST)		+= clk-icst.o clk-versatile.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)	+= clk-impd1.o
 obj-$(CONFIG_ARCH_REALVIEW)	+= clk-realview.o
 obj-$(CONFIG_ARCH_VEXPRESS)	+= clk-vexpress.o clk-sp810.o
diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-versatile.c
similarity index 66%
rename from drivers/clk/versatile/clk-integrator.c
rename to drivers/clk/versatile/clk-versatile.c
index 734c4b8..fe52a79 100644
--- a/drivers/clk/versatile/clk-integrator.c
+++ b/drivers/clk/versatile/clk-versatile.c
@@ -17,6 +17,9 @@
 
 #define INTEGRATOR_HDR_LOCK_OFFSET	0x14
 
+#define VERSATILE_SYS_OSCCLCD_OFFSET	0x1c
+#define VERSATILE_SYS_LOCK_OFFSET	0x20
+
 /* Base offset for the core module */
 static void __iomem *cm_base;
 
@@ -37,11 +40,27 @@ static const struct clk_icst_desc __initdata cm_auxosc_desc = {
 	.lock_offset = INTEGRATOR_HDR_LOCK_OFFSET,
 };
 
-static void __init of_integrator_cm_osc_setup(struct device_node *np)
+static const struct icst_params versatile_auxosc_params = {
+	.vco_max	= ICST307_VCO_MAX,
+	.vco_min	= ICST307_VCO_MIN,
+	.vd_min		= 4 + 8,
+	.vd_max		= 511 + 8,
+	.rd_min		= 1 + 2,
+	.rd_max		= 127 + 2,
+	.s2div		= icst307_s2div,
+	.idx2s		= icst307_idx2s,
+};
+
+static const struct clk_icst_desc versatile_auxosc_desc __initconst = {
+	.params = &versatile_auxosc_params,
+	.vco_offset = VERSATILE_SYS_OSCCLCD_OFFSET,
+	.lock_offset = VERSATILE_SYS_LOCK_OFFSET,
+};
+static void __init cm_osc_setup(struct device_node *np,
+				const struct clk_icst_desc *desc)
 {
 	struct clk *clk = ERR_PTR(-EINVAL);
 	const char *clk_name = np->name;
-	const struct clk_icst_desc *desc = &cm_auxosc_desc;
 	const char *parent_name;
 
 	if (!cm_base) {
@@ -65,5 +84,17 @@ static void __init of_integrator_cm_osc_setup(struct device_node *np)
 	if (!IS_ERR(clk))
 		of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
+
+static void __init of_integrator_cm_osc_setup(struct device_node *np)
+{
+	cm_osc_setup(np, &cm_auxosc_desc);
+}
 CLK_OF_DECLARE(integrator_cm_auxosc_clk,
 	"arm,integrator-cm-auxosc", of_integrator_cm_osc_setup);
+
+static void __init of_versatile_cm_osc_setup(struct device_node *np)
+{
+	cm_osc_setup(np, &versatile_auxosc_desc);
+}
+CLK_OF_DECLARE(versatile_cm_auxosc_clk,
+	       "arm,versatile-cm-auxosc", of_versatile_cm_osc_setup);
-- 
1.9.1

[PATCH v2 00/11] ARM: Versatile irq and clock DT support

[Linus Walleij]

On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:

> Linus, This could use testing again on Versatile.

OK I should probably test on Versatile *and* the Integrators since
these are also affected. Do you have a branch I can pull?

Yours,
Linus Walleij

[PATCH v2 02/11] irqchip: versatile-fpga: Add IRQCHIP_DECLARE support

[Linus Walleij]

On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:

> From: Rob Herring <robh@kernel.org>
>
> Add support for initialization using IRQCHIP_DECLARE. This also requires
> that the controller initialization set the handle_irq function pointer
> itself when it is a primary controller.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> ---
> v2:
> - New patch

I just assume you know what you're doing ;-)
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH v2 03/11] irqchip: versatile-fpga: add support for arm, versatile-sic

[Linus Walleij]

On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:

> From: Rob Herring <robh@kernel.org>
>
> The secondary controller on ARM Versatile AB and PB is similar to
> other ARM platforms, but has a pass-thru register to connect some
> interrupts directly to interrupt inputs on the primary interrupt
> controller. The PIC_ENABLES register needs to be configured for
> proper operation when the matching node is arm,versatile-sic. Add the
> the necessary IRQCHIP_DECLARE as well.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Arnd Bergmann <arnd@arndb.de>
> ---
> v2:
> - Rework to use the compatible string for pass-thru register setup.

Nice!

> +       /*
> +        * On Versatile AB/PB, some secondary interrupts have a direct
> +        * pass-thru to the primary controller which need to be enabled.
> +        */
> +       if (of_device_is_compatible(node, "arm,versatile-sic"))
> +               writel(0xffd00000, base + PIC_ENABLES);

Maybe mention that we pass thru IRQs 20 and 22 thru 31 and
why exactly these IRQs?

Anyway:
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH v2 04/11] ARM: integrator: convert to use irqchip_init

[Linus Walleij]

On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:

> From: Rob Herring <robh@kernel.org>
>
> Now that versatile-fpga irqchip has IRQCHIP_DECLARE support, the interrupt
> related initialization can be removed.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> ---
> v2:
> - New patch

Awesomeness, Acked-by.
Will provide Tested-by tags too once I get it running.

Yours,
Linus Walleij

[PATCH v2 05/11] ARM: versatile: remove init_irq hook for DT boot

[Linus Walleij]

On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:

> From: Rob Herring <robh@kernel.org>
>
> Now that versatile's irqchips are initialized from DT, the init_irq hook
> can be removed.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Acked-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH v2 07/11] dt/bindings: arm-boards: add binding for Versatile core module

[Linus Walleij]

On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:

> From: Rob Herring <robh@kernel.org>
>
> Add binding for the core module found on ARM versatile AB and PB boards.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: Kumar Gala <galak@codeaurora.org>
> Acked-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Makes me wonder if I should abstract out the Integrator core
modules too. Oh well, put on my TODO...

Yours,
Linus Walleij

[PATCH v2 10/11] dts: versatile: add clock tree

[Linus Walleij]

On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:

> From: Rob Herring <robh@kernel.org>
>
> The versatile dts is missing any clock data. Add the clocks.
>
> It is not clear from the documentation where pclk comes from, so for
> now it is a dummy clock which is sufficient for things to work.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> ---
> v2:
> - Move and Rename crystal node.
> - Define pclk as 24MHz based on Linus W's input
> - fix timer to be 3 clocks and fix names
> - Fix sspclk clock name

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH v2 11/11] clk: versatile: add versatile OSC support

[Linus Walleij]

On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:

> From: Rob Herring <robh@kernel.org>
>
> Versatile platforms share the same OSC programming model as Integrator
> platforms. Add the necessary parameters and init functions for Versatile.
>
> Renaming the file to clk-versatile.c as versatile is used as the family
> name for ARM, Ltd. boards.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Mike Turquette <mturquette@linaro.org>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> ---
> v2:
> - Rename clk-integrator.c to clk-versatile.c

Nice!

> --- a/drivers/clk/versatile/clk-integrator.c
> +++ b/drivers/clk/versatile/clk-versatile.c

I bet you want to augment the comments in the top of the file
header a bit to mention the Versatiles.

With that:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH v2 00/11] ARM: Versatile irq and clock DT support

[Rob Herring]

On Fri, May 30, 2014 at 4:41 AM, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:
>
>> Linus, This could use testing again on Versatile.
>
> OK I should probably test on Versatile *and* the Integrators since
> these are also affected. Do you have a branch I can pull?

git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git versatile-v2

Rob

[PATCH v2 11/11] clk: versatile: add versatile OSC support

[Mike Turquette]

Quoting Rob Herring (2014-05-29 15:40:21)
> From: Rob Herring <robh@kernel.org>
> 
> Versatile platforms share the same OSC programming model as Integrator
> platforms. Add the necessary parameters and init functions for Versatile.
> 
> Renaming the file to clk-versatile.c as versatile is used as the family
> name for ARM, Ltd. boards.
> 
> Signed-off-by: Rob Herring <robh@kernel.org>
> Cc: Mike Turquette <mturquette@linaro.org>
> Acked-by: Arnd Bergmann <arnd@arndb.de>

So it's OK to rename the file and add the new stuff in one commit? I
thought there were some guidelines about doing renames separately...

Regards,
Mike

> ---
> v2:
> - Rename clk-integrator.c to clk-versatile.c
> 
>  drivers/clk/versatile/Makefile                     |  3 +-
>  .../{clk-integrator.c => clk-versatile.c}          | 35 ++++++++++++++++++++--
>  2 files changed, 34 insertions(+), 4 deletions(-)
>  rename drivers/clk/versatile/{clk-integrator.c => clk-versatile.c} (66%)
> 
> diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
> index c16ca78..9ee2b37 100644
> --- a/drivers/clk/versatile/Makefile
> +++ b/drivers/clk/versatile/Makefile
> @@ -1,6 +1,5 @@
>  # Makefile for Versatile-specific clocks
> -obj-$(CONFIG_ICST)             += clk-icst.o
> -obj-$(CONFIG_ARCH_INTEGRATOR)  += clk-integrator.o
> +obj-$(CONFIG_ICST)             += clk-icst.o clk-versatile.o
>  obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
>  obj-$(CONFIG_ARCH_REALVIEW)    += clk-realview.o
>  obj-$(CONFIG_ARCH_VEXPRESS)    += clk-vexpress.o clk-sp810.o
> diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-versatile.c
> similarity index 66%
> rename from drivers/clk/versatile/clk-integrator.c
> rename to drivers/clk/versatile/clk-versatile.c
> index 734c4b8..fe52a79 100644
> --- a/drivers/clk/versatile/clk-integrator.c
> +++ b/drivers/clk/versatile/clk-versatile.c
> @@ -17,6 +17,9 @@
>  
>  #define INTEGRATOR_HDR_LOCK_OFFSET     0x14
>  
> +#define VERSATILE_SYS_OSCCLCD_OFFSET   0x1c
> +#define VERSATILE_SYS_LOCK_OFFSET      0x20
> +
>  /* Base offset for the core module */
>  static void __iomem *cm_base;
>  
> @@ -37,11 +40,27 @@ static const struct clk_icst_desc __initdata cm_auxosc_desc = {
>         .lock_offset = INTEGRATOR_HDR_LOCK_OFFSET,
>  };
>  
> -static void __init of_integrator_cm_osc_setup(struct device_node *np)
> +static const struct icst_params versatile_auxosc_params = {
> +       .vco_max        = ICST307_VCO_MAX,
> +       .vco_min        = ICST307_VCO_MIN,
> +       .vd_min         = 4 + 8,
> +       .vd_max         = 511 + 8,
> +       .rd_min         = 1 + 2,
> +       .rd_max         = 127 + 2,
> +       .s2div          = icst307_s2div,
> +       .idx2s          = icst307_idx2s,
> +};
> +
> +static const struct clk_icst_desc versatile_auxosc_desc __initconst = {
> +       .params = &versatile_auxosc_params,
> +       .vco_offset = VERSATILE_SYS_OSCCLCD_OFFSET,
> +       .lock_offset = VERSATILE_SYS_LOCK_OFFSET,
> +};
> +static void __init cm_osc_setup(struct device_node *np,
> +                               const struct clk_icst_desc *desc)
>  {
>         struct clk *clk = ERR_PTR(-EINVAL);
>         const char *clk_name = np->name;
> -       const struct clk_icst_desc *desc = &cm_auxosc_desc;
>         const char *parent_name;
>  
>         if (!cm_base) {
> @@ -65,5 +84,17 @@ static void __init of_integrator_cm_osc_setup(struct device_node *np)
>         if (!IS_ERR(clk))
>                 of_clk_add_provider(np, of_clk_src_simple_get, clk);
>  }
> +
> +static void __init of_integrator_cm_osc_setup(struct device_node *np)
> +{
> +       cm_osc_setup(np, &cm_auxosc_desc);
> +}
>  CLK_OF_DECLARE(integrator_cm_auxosc_clk,
>         "arm,integrator-cm-auxosc", of_integrator_cm_osc_setup);
> +
> +static void __init of_versatile_cm_osc_setup(struct device_node *np)
> +{
> +       cm_osc_setup(np, &versatile_auxosc_desc);
> +}
> +CLK_OF_DECLARE(versatile_cm_auxosc_clk,
> +              "arm,versatile-cm-auxosc", of_versatile_cm_osc_setup);
> -- 
> 1.9.1
> 

[PATCH v2 11/11] clk: versatile: add versatile OSC support

[Rob Herring]

On Fri, May 30, 2014 at 6:03 PM, Mike Turquette <mturquette@linaro.org> wrote:
> Quoting Rob Herring (2014-05-29 15:40:21)
>> From: Rob Herring <robh@kernel.org>
>>
>> Versatile platforms share the same OSC programming model as Integrator
>> platforms. Add the necessary parameters and init functions for Versatile.
>>
>> Renaming the file to clk-versatile.c as versatile is used as the family
>> name for ARM, Ltd. boards.
>>
>> Signed-off-by: Rob Herring <robh@kernel.org>
>> Cc: Mike Turquette <mturquette@linaro.org>
>> Acked-by: Arnd Bergmann <arnd@arndb.de>
>
> So it's OK to rename the file and add the new stuff in one commit? I
> thought there were some guidelines about doing renames separately...

You don't want to move of a chunk of code and change it along the way
because you can't see the real changes, but a file rename does not
affect the diff here (other than the Makefile change).

Rob

>
> Regards,
> Mike
>
>> ---
>> v2:
>> - Rename clk-integrator.c to clk-versatile.c
>>
>>  drivers/clk/versatile/Makefile                     |  3 +-
>>  .../{clk-integrator.c => clk-versatile.c}          | 35 ++++++++++++++++++++--
>>  2 files changed, 34 insertions(+), 4 deletions(-)
>>  rename drivers/clk/versatile/{clk-integrator.c => clk-versatile.c} (66%)
>>
>> diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
>> index c16ca78..9ee2b37 100644
>> --- a/drivers/clk/versatile/Makefile
>> +++ b/drivers/clk/versatile/Makefile
>> @@ -1,6 +1,5 @@
>>  # Makefile for Versatile-specific clocks
>> -obj-$(CONFIG_ICST)             += clk-icst.o
>> -obj-$(CONFIG_ARCH_INTEGRATOR)  += clk-integrator.o
>> +obj-$(CONFIG_ICST)             += clk-icst.o clk-versatile.o
>>  obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
>>  obj-$(CONFIG_ARCH_REALVIEW)    += clk-realview.o
>>  obj-$(CONFIG_ARCH_VEXPRESS)    += clk-vexpress.o clk-sp810.o
>> diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-versatile.c
>> similarity index 66%
>> rename from drivers/clk/versatile/clk-integrator.c
>> rename to drivers/clk/versatile/clk-versatile.c
>> index 734c4b8..fe52a79 100644
>> --- a/drivers/clk/versatile/clk-integrator.c
>> +++ b/drivers/clk/versatile/clk-versatile.c
>> @@ -17,6 +17,9 @@
>>
>>  #define INTEGRATOR_HDR_LOCK_OFFSET     0x14
>>
>> +#define VERSATILE_SYS_OSCCLCD_OFFSET   0x1c
>> +#define VERSATILE_SYS_LOCK_OFFSET      0x20
>> +
>>  /* Base offset for the core module */
>>  static void __iomem *cm_base;
>>
>> @@ -37,11 +40,27 @@ static const struct clk_icst_desc __initdata cm_auxosc_desc = {
>>         .lock_offset = INTEGRATOR_HDR_LOCK_OFFSET,
>>  };
>>
>> -static void __init of_integrator_cm_osc_setup(struct device_node *np)
>> +static const struct icst_params versatile_auxosc_params = {
>> +       .vco_max        = ICST307_VCO_MAX,
>> +       .vco_min        = ICST307_VCO_MIN,
>> +       .vd_min         = 4 + 8,
>> +       .vd_max         = 511 + 8,
>> +       .rd_min         = 1 + 2,
>> +       .rd_max         = 127 + 2,
>> +       .s2div          = icst307_s2div,
>> +       .idx2s          = icst307_idx2s,
>> +};
>> +
>> +static const struct clk_icst_desc versatile_auxosc_desc __initconst = {
>> +       .params = &versatile_auxosc_params,
>> +       .vco_offset = VERSATILE_SYS_OSCCLCD_OFFSET,
>> +       .lock_offset = VERSATILE_SYS_LOCK_OFFSET,
>> +};
>> +static void __init cm_osc_setup(struct device_node *np,
>> +                               const struct clk_icst_desc *desc)
>>  {
>>         struct clk *clk = ERR_PTR(-EINVAL);
>>         const char *clk_name = np->name;
>> -       const struct clk_icst_desc *desc = &cm_auxosc_desc;
>>         const char *parent_name;
>>
>>         if (!cm_base) {
>> @@ -65,5 +84,17 @@ static void __init of_integrator_cm_osc_setup(struct device_node *np)
>>         if (!IS_ERR(clk))
>>                 of_clk_add_provider(np, of_clk_src_simple_get, clk);
>>  }
>> +
>> +static void __init of_integrator_cm_osc_setup(struct device_node *np)
>> +{
>> +       cm_osc_setup(np, &cm_auxosc_desc);
>> +}
>>  CLK_OF_DECLARE(integrator_cm_auxosc_clk,
>>         "arm,integrator-cm-auxosc", of_integrator_cm_osc_setup);
>> +
>> +static void __init of_versatile_cm_osc_setup(struct device_node *np)
>> +{
>> +       cm_osc_setup(np, &versatile_auxosc_desc);
>> +}
>> +CLK_OF_DECLARE(versatile_cm_auxosc_clk,
>> +              "arm,versatile-cm-auxosc", of_versatile_cm_osc_setup);
>> --
>> 1.9.1
>>

[PATCH v2 11/11] clk: versatile: add versatile OSC support

[Mike Turquette]

Quoting Rob Herring (2014-05-30 19:38:44)
> On Fri, May 30, 2014 at 6:03 PM, Mike Turquette <mturquette@linaro.org> wrote:
> > Quoting Rob Herring (2014-05-29 15:40:21)
> >> From: Rob Herring <robh@kernel.org>
> >>
> >> Versatile platforms share the same OSC programming model as Integrator
> >> platforms. Add the necessary parameters and init functions for Versatile.
> >>
> >> Renaming the file to clk-versatile.c as versatile is used as the family
> >> name for ARM, Ltd. boards.
> >>
> >> Signed-off-by: Rob Herring <robh@kernel.org>
> >> Cc: Mike Turquette <mturquette@linaro.org>
> >> Acked-by: Arnd Bergmann <arnd@arndb.de>
> >
> > So it's OK to rename the file and add the new stuff in one commit? I
> > thought there were some guidelines about doing renames separately...
> 
> You don't want to move of a chunk of code and change it along the way
> because you can't see the real changes, but a file rename does not
> affect the diff here (other than the Makefile change).

Sounds good. Let me know if you want me to take this into clk-next after
-rc1 drops. Otherwise:

Acked-by: Mike Turquette <mturquette@linaro.org>

Regards,
Mike

> 
> Rob
> 
> >
> > Regards,
> > Mike
> >
> >> ---
> >> v2:
> >> - Rename clk-integrator.c to clk-versatile.c
> >>
> >>  drivers/clk/versatile/Makefile                     |  3 +-
> >>  .../{clk-integrator.c => clk-versatile.c}          | 35 ++++++++++++++++++++--
> >>  2 files changed, 34 insertions(+), 4 deletions(-)
> >>  rename drivers/clk/versatile/{clk-integrator.c => clk-versatile.c} (66%)
> >>
> >> diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
> >> index c16ca78..9ee2b37 100644
> >> --- a/drivers/clk/versatile/Makefile
> >> +++ b/drivers/clk/versatile/Makefile
> >> @@ -1,6 +1,5 @@
> >>  # Makefile for Versatile-specific clocks
> >> -obj-$(CONFIG_ICST)             += clk-icst.o
> >> -obj-$(CONFIG_ARCH_INTEGRATOR)  += clk-integrator.o
> >> +obj-$(CONFIG_ICST)             += clk-icst.o clk-versatile.o
> >>  obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
> >>  obj-$(CONFIG_ARCH_REALVIEW)    += clk-realview.o
> >>  obj-$(CONFIG_ARCH_VEXPRESS)    += clk-vexpress.o clk-sp810.o
> >> diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-versatile.c
> >> similarity index 66%
> >> rename from drivers/clk/versatile/clk-integrator.c
> >> rename to drivers/clk/versatile/clk-versatile.c
> >> index 734c4b8..fe52a79 100644
> >> --- a/drivers/clk/versatile/clk-integrator.c
> >> +++ b/drivers/clk/versatile/clk-versatile.c
> >> @@ -17,6 +17,9 @@
> >>
> >>  #define INTEGRATOR_HDR_LOCK_OFFSET     0x14
> >>
> >> +#define VERSATILE_SYS_OSCCLCD_OFFSET   0x1c
> >> +#define VERSATILE_SYS_LOCK_OFFSET      0x20
> >> +
> >>  /* Base offset for the core module */
> >>  static void __iomem *cm_base;
> >>
> >> @@ -37,11 +40,27 @@ static const struct clk_icst_desc __initdata cm_auxosc_desc = {
> >>         .lock_offset = INTEGRATOR_HDR_LOCK_OFFSET,
> >>  };
> >>
> >> -static void __init of_integrator_cm_osc_setup(struct device_node *np)
> >> +static const struct icst_params versatile_auxosc_params = {
> >> +       .vco_max        = ICST307_VCO_MAX,
> >> +       .vco_min        = ICST307_VCO_MIN,
> >> +       .vd_min         = 4 + 8,
> >> +       .vd_max         = 511 + 8,
> >> +       .rd_min         = 1 + 2,
> >> +       .rd_max         = 127 + 2,
> >> +       .s2div          = icst307_s2div,
> >> +       .idx2s          = icst307_idx2s,
> >> +};
> >> +
> >> +static const struct clk_icst_desc versatile_auxosc_desc __initconst = {
> >> +       .params = &versatile_auxosc_params,
> >> +       .vco_offset = VERSATILE_SYS_OSCCLCD_OFFSET,
> >> +       .lock_offset = VERSATILE_SYS_LOCK_OFFSET,
> >> +};
> >> +static void __init cm_osc_setup(struct device_node *np,
> >> +                               const struct clk_icst_desc *desc)
> >>  {
> >>         struct clk *clk = ERR_PTR(-EINVAL);
> >>         const char *clk_name = np->name;
> >> -       const struct clk_icst_desc *desc = &cm_auxosc_desc;
> >>         const char *parent_name;
> >>
> >>         if (!cm_base) {
> >> @@ -65,5 +84,17 @@ static void __init of_integrator_cm_osc_setup(struct device_node *np)
> >>         if (!IS_ERR(clk))
> >>                 of_clk_add_provider(np, of_clk_src_simple_get, clk);
> >>  }
> >> +
> >> +static void __init of_integrator_cm_osc_setup(struct device_node *np)
> >> +{
> >> +       cm_osc_setup(np, &cm_auxosc_desc);
> >> +}
> >>  CLK_OF_DECLARE(integrator_cm_auxosc_clk,
> >>         "arm,integrator-cm-auxosc", of_integrator_cm_osc_setup);
> >> +
> >> +static void __init of_versatile_cm_osc_setup(struct device_node *np)
> >> +{
> >> +       cm_osc_setup(np, &versatile_auxosc_desc);
> >> +}
> >> +CLK_OF_DECLARE(versatile_cm_auxosc_clk,
> >> +              "arm,versatile-cm-auxosc", of_versatile_cm_osc_setup);
> >> --
> >> 1.9.1
> >>

[PATCH v2 00/11] ARM: Versatile irq and clock DT support

[Jason Cooper]

Linus,

On Fri, May 30, 2014 at 11:41:51AM +0200, Linus Walleij wrote:
> On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:
> 
> > Linus, This could use testing again on Versatile.
> 
> OK I should probably test on Versatile *and* the Integrators since
> these are also affected. Do you have a branch I can pull?

Did you get a chance to test this series?

thx,

Jason.

[PATCH v2 00/11] ARM: Versatile irq and clock DT support

[Linus Walleij]

On Sat, Jun 21, 2014 at 4:10 AM, Jason Cooper <jason@lakedaemon.net> wrote:
> On Fri, May 30, 2014 at 11:41:51AM +0200, Linus Walleij wrote:
>> On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:
>>
>> > Linus, This could use testing again on Versatile.
>>
>> OK I should probably test on Versatile *and* the Integrators since
>> these are also affected. Do you have a branch I can pull?
>
> Did you get a chance to test this series?

Sadly not yet :-(

I'm snowed under by regressions FTM.

Yours,
Linus Walleij

[PATCH v2 00/11] ARM: Versatile irq and clock DT support

[Linus Walleij]

On Mon, Jun 23, 2014 at 1:08 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Sat, Jun 21, 2014 at 4:10 AM, Jason Cooper <jason@lakedaemon.net> wrote:
>> On Fri, May 30, 2014 at 11:41:51AM +0200, Linus Walleij wrote:
>>> On Fri, May 30, 2014 at 12:40 AM, Rob Herring <robherring2@gmail.com> wrote:
>>>
>>> > Linus, This could use testing again on Versatile.
>>>
>>> OK I should probably test on Versatile *and* the Integrators since
>>> these are also affected. Do you have a branch I can pull?
>>
>> Did you get a chance to test this series?
>
> Sadly not yet :-(
>
> I'm snowed under by regressions FTM.

Tested now and it works like a charm on Versatile/AB.

Also sent a Tested-by tag to Rob's pull request.

Yours,
Linus Walleij