From: gabriel.fernandez@st.com (Gabriel FERNANDEZ)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0
Date: Wed, 4 Jun 2014 16:31:53 +0200 [thread overview]
Message-ID: <1401892320-18211-6-git-send-email-gabriel.fernandez@linaro.org> (raw)
In-Reply-To: <1401892320-18211-1-git-send-email-gabriel.fernandez@linaro.org>
The patch added support for DT registration of ClockGenA0
It includes c32 type PLL.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
drivers/clk/st/clkgen-pll.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index d8b9b1a..6916cfa 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -180,6 +180,18 @@ static struct clkgen_pll_data st_pll1200c32_gpu_416 = {
.ops = &st_pll1200c32_ops,
};
+static struct clkgen_pll_data st_pll3200c32_407_a0 = {
+ /* 407 A0 */
+ .pdn_status = CLKGEN_FIELD(0x2a0, 0x1, 8),
+ .locked_status = CLKGEN_FIELD(0x2a0, 0x1, 24),
+ .ndiv = CLKGEN_FIELD(0x2a4, C32_NDIV_MASK, 16),
+ .idf = CLKGEN_FIELD(0x2a4, C32_IDF_MASK, 0x0),
+ .num_odfs = 1,
+ .odf = { CLKGEN_FIELD(0x2b4, C32_ODF_MASK, 0) },
+ .odf_gate = { CLKGEN_FIELD(0x2b4, 0x1, 6) },
+ .ops = &stm_pll3200c32_ops,
+};
+
/**
* DOC: Clock Generated by PLL, rate set and enabled by bootloader
*
@@ -572,6 +584,10 @@ static struct of_device_id c32_pll_of_match[] = {
.compatible = "st,stih416-plls-c32-ddr",
.data = &st_pll3200c32_ddr_416,
},
+ {
+ .compatible = "st,stih407-plls-c32-a0",
+ .data = &st_pll3200c32_407_a0,
+ },
{}
};
--
1.9.1
next prev parent reply other threads:[~2014-06-04 14:31 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-04 14:31 [PATCH RESEND 00/12] Add Flexgen Clock support Gabriel FERNANDEZ
2014-06-04 14:31 ` [PATCH RESEND 01/12] clk: st: Update ST clock binding documentation Gabriel FERNANDEZ
2014-06-05 8:48 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 02/12] clk: st: Adds Flexgen clock binding Gabriel FERNANDEZ
2014-06-05 7:51 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 03/12] drivers: clk: st: STiH407: Support for Flexgen Clocks Gabriel FERNANDEZ
2014-06-05 8:17 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 04/12] drivers: clk: st: STiH407: Support for A9 MUX Clocks Gabriel FERNANDEZ
2014-06-05 8:55 ` [STLinux Kernel] " Peter Griffin
2014-06-05 9:00 ` Peter Griffin
2014-06-04 14:31 ` Gabriel FERNANDEZ [this message]
2014-06-05 11:57 ` [STLinux Kernel] [PATCH RESEND 05/12] drivers: clk: st: STiH407: Support for clockgenA0 Peter Griffin
2014-06-27 11:47 ` Gabriel Fernandez
2014-06-04 14:31 ` [PATCH RESEND 06/12] drivers: clk: st: Add polarity bit indication Gabriel FERNANDEZ
2014-06-05 7:45 ` [STLinux Kernel] " Peter Griffin
2014-06-05 7:51 ` Gabriel Fernandez
2014-06-04 14:31 ` [PATCH RESEND 07/12] drivers: clk: st: Add quadfs reset handling Gabriel FERNANDEZ
2014-06-05 11:16 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 08/12] drivers: clk: st: STiH407: Support for clockgenC0 Gabriel FERNANDEZ
2014-06-05 11:32 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 09/12] drivers: clk: st: STiH407: Support for clockgenD0/D2/D3 Gabriel FERNANDEZ
2014-06-05 8:58 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 10/12] drivers: clk: st: STiH407: Support for clockgenA9 Gabriel FERNANDEZ
2014-06-05 9:01 ` [STLinux Kernel] " Peter Griffin
2014-06-04 14:31 ` [PATCH RESEND 11/12] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65 Gabriel FERNANDEZ
2014-06-05 11:13 ` [STLinux Kernel] " Peter Griffin
2014-06-27 11:50 ` Gabriel Fernandez
2014-06-04 14:32 ` [PATCH RESEND 12/12] drivers: clk: st: Use round to closest divider flag Gabriel FERNANDEZ
2014-06-05 11:57 ` [STLinux Kernel] " Peter Griffin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401892320-18211-6-git-send-email-gabriel.fernandez@linaro.org \
--to=gabriel.fernandez@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).