From: gabriel.fernandez@st.com (Gabriel FERNANDEZ)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: STi: DT: STiH407: 407 DT Entry for clockgen D0/D2/D3
Date: Wed, 4 Jun 2014 16:32:51 +0200 [thread overview]
Message-ID: <1401892372-18279-4-git-send-email-gabriel.fernandez@linaro.org> (raw)
In-Reply-To: <1401892372-18279-1-git-send-email-gabriel.fernandez@linaro.org>
Patch adds DT entries for clockgen D0/D2/D3
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
arch/arm/boot/dts/stih407-clock.dtsi | 126 +++++++++++++++++++++++++++++++++++
1 file changed, 126 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 85cc135..6e59011 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -139,5 +139,131 @@
"clk-compo-dvp";
};
};
+
+ clk_s_d0_quadfs: clk-s-d0-quadfs at 9104000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9104000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d0-fs0-ch0",
+ "clk-s-d0-fs0-ch1",
+ "clk-s-d0-fs0-ch2",
+ "clk-s-d0-fs0-ch3";
+ };
+
+ clockgen-d0 at 09104000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9104000 0x1000>;
+
+ clk_s_d0_flexgen: clk-s-d0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d0_quadfs 0>,
+ <&clk_s_d0_quadfs 1>,
+ <&clk_s_d0_quadfs 2>,
+ <&clk_s_d0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-pcm-0",
+ "clk-pcm-1",
+ "clk-pcm-2",
+ "clk-spdiff";
+ };
+ };
+
+ clk_s_d2_quadfs: clk-s-d2-quadfs at 9106000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9106000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d2-fs0-ch0",
+ "clk-s-d2-fs0-ch1",
+ "clk-s-d2-fs0-ch2",
+ "clk-s-d2-fs0-ch3";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clockgen-d2 at x9106000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9106000 0x1000>;
+
+ clk_s_d2_flexgen: clk-s-d2-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>,
+ <&clk_s_d2_quadfs 2>,
+ <&clk_s_d2_quadfs 3>,
+ <&clk_sysin>,
+ <&clk_sysin>,
+ <&clk_tmdsout_hdmi>;
+
+ clock-output-names = "clk-pix-main-disp",
+ "clk-pix-pip",
+ "clk-pix-gdp1",
+ "clk-pix-gdp2",
+ "clk-pix-gdp3",
+ "clk-pix-gdp4",
+ "clk-pix-aux-disp",
+ "clk-denc",
+ "clk-pix-hddac",
+ "clk-hddac",
+ "clk-sddac",
+ "clk-pix-dvo",
+ "clk-dvo",
+ "clk-pix-hdmi",
+ "",
+ "clk-ref-hdmiphy";
+ };
+ };
+
+ clk_s_d3_quadfs: clk-s-d3-quadfs at 9107000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9107000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d3-fs0-ch0",
+ "clk-s-d3-fs0-ch1",
+ "clk-s-d3-fs0-ch2",
+ "clk-s-d3-fs0-ch3";
+ };
+
+ clockgen-d3 at 9107000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9107000 0x1000>;
+
+ clk_s_d3_flexgen: clk-s-d3-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d3_quadfs 0>,
+ <&clk_s_d3_quadfs 1>,
+ <&clk_s_d3_quadfs 2>,
+ <&clk_s_d3_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-stfe-frc1",
+ "clk-tsout-0",
+ "clk-tsout-1",
+ "clk-mchi",
+ "clk-vsens-compo",
+ "clk-frc1-remote",
+ "clk-lpc-0",
+ "clk-lpc-1";
+ };
+ };
};
};
--
1.9.1
next prev parent reply other threads:[~2014-06-04 14:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-04 14:32 [PATCH 0/4] Enables STMicroelectronics Flexgen Clock support Gabriel FERNANDEZ
2014-06-04 14:32 ` [PATCH 1/4] ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0 Gabriel FERNANDEZ
2014-06-04 14:32 ` [PATCH 2/4] ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0 Gabriel FERNANDEZ
2014-06-04 14:32 ` Gabriel FERNANDEZ [this message]
2014-06-04 14:32 ` [PATCH 4/4] ARM: STi: DT: STiH407: 407 DT Entry for clockgenA9 Gabriel FERNANDEZ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401892372-18279-4-git-send-email-gabriel.fernandez@linaro.org \
--to=gabriel.fernandez@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).