From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Thu, 5 Jun 2014 16:06:58 +0100 Subject: [PATCH 5/6] ARM: STi: DT: STiH416: Supply Thermal Controller Device Tree nodes In-Reply-To: <1401980819-19962-1-git-send-email-lee.jones@linaro.org> References: <1401980819-19962-1-git-send-email-lee.jones@linaro.org> Message-ID: <1401980819-19962-6-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org We supply two of these. The first is controlled by the System Configuration registers and the second one provided is a more traditional 'memory mapped' variant. Each are handled by they own sub-driver. Signed-off-by: Ajit Pal Singh Signed-off-by: Lee Jones --- arch/arm/boot/dts/stih416.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 06473c5..ed80220 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -236,5 +236,23 @@ resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, <&softreset STIH416_KEYSCAN_SOFTRESET>; }; + + temp0 { + compatible = "st,stih416-sas-thermal"; + clock-names = "thermal"; + clocks = <&clockgen_c_vcc 14>; + + status = "okay"; + }; + + temp1 at fdfe8000 { + compatible = "st,stih416-mpe-thermal"; + reg = <0xfdfe8000 0x10>; + clocks = <&clockgen_e 3>; + clock-names = "thermal"; + interrupts = ; + + status = "okay"; + }; }; }; -- 1.8.3.2