From mboxrd@z Thu Jan 1 00:00:00 1970 From: antoine.tenart@free-electrons.com (=?UTF-8?q?Antoine=20T=C3=A9nart?=) Date: Thu, 5 Jun 2014 17:48:44 +0200 Subject: [PATCH 7/9] Documentation: bindings: add doc for the Berlin ChipIdea USB driver In-Reply-To: <1401983326-19205-1-git-send-email-antoine.tenart@free-electrons.com> References: <1401983326-19205-1-git-send-email-antoine.tenart@free-electrons.com> Message-ID: <1401983326-19205-8-git-send-email-antoine.tenart@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Document the Marvell Berlin USB driver bindings. Signed-off-by: Antoine T?nart --- .../devicetree/bindings/usb/ci-hdrc-berlin.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-berlin.txt diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-berlin.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-berlin.txt new file mode 100644 index 000000000000..a3fc9054b830 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-berlin.txt @@ -0,0 +1,18 @@ +* Marvell Berlin usb controllers + +Required properties: +- compatible: should be "marvell,berlin-usb" +- reg: base address and length of the registers +- interrupts: interrupt for the USB controller +- clocks: reference to the USB clock +- marvell,usbphy: reference to the USB PHY + +Example: + + usb at f7ed0000 { + compatible = "marvell,berlin-usb"; + reg = <0xf7ed0000 0x10000>; + interrupts = ; + clocks = <&chip CLKID_USB0>; + marvell,usbphy = <&usb_phy0>; + }; -- 1.9.1