From: dianders@chromium.org (Doug Anderson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] clk: exynos5420: Remove aclk66_peric from the clock tree description
Date: Thu, 5 Jun 2014 13:35:14 -0700 [thread overview]
Message-ID: <1402000514-30752-1-git-send-email-dianders@chromium.org> (raw)
In-Reply-To: <1401467562-5585-1-git-send-email-dianders@chromium.org>
The "aclk66_peric" clock is a gate clock with a whole bunch of gates
underneath it. This big gate isn't very useful to include in our
clock tree. If any of the children need to be turned on then the big
gate will need to be on anyway. ...and there are plenty of other "big
gates" that aren't described in our clock tree, some of which shut off
collections of clocks that have no relationship in the hierarchy so
are hard to model.
"aclk66_peric" is causing earlyprintk problems since it gets disabled
as part of the boot process, so let's just remove it.
Strangely (and for no good reason) this clock is exported as part of
the common clock bindings. Remove it since there are no in-kernel
device trees using it and no reason anyone out of tree should refer to
it either.
Signed-off-by: Doug Anderson <dianders@chromium.org>
---
Changes in v3:
- Now just remove aclk66_peric from the tree as suggested by Tomasz.
Changes in v2:
- Use GATE_A and clk_get(). Save the clock for putting later.
- Return 0 from exynos5420_clk_late_init().
drivers/clk/samsung/clk-exynos5420.c | 85 ++++++++++++++++++++++------------
include/dt-bindings/clock/exynos5420.h | 1 -
2 files changed, 55 insertions(+), 31 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 9d7d7ee..61eccf0 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -890,8 +890,6 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk66_psgen", "mout_user_aclk66_psgen",
GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
- GATE(CLK_ACLK66_PERIC, "aclk66_peric", "mout_user_aclk66_peric",
- GATE_BUS_TOP, 11, CLK_IGNORE_UNUSED, 0),
GATE(0, "aclk266_isp", "mout_user_aclk266_isp",
GATE_BUS_TOP, 13, 0, 0),
GATE(0, "aclk166", "mout_user_aclk166",
@@ -994,34 +992,61 @@ static struct samsung_gate_clock exynos5x_gate_clks[] __initdata = {
SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
/* PERIC Block */
- GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0),
- GATE(CLK_UART1, "uart1", "aclk66_peric", GATE_IP_PERIC, 1, 0, 0),
- GATE(CLK_UART2, "uart2", "aclk66_peric", GATE_IP_PERIC, 2, 0, 0),
- GATE(CLK_UART3, "uart3", "aclk66_peric", GATE_IP_PERIC, 3, 0, 0),
- GATE(CLK_I2C0, "i2c0", "aclk66_peric", GATE_IP_PERIC, 6, 0, 0),
- GATE(CLK_I2C1, "i2c1", "aclk66_peric", GATE_IP_PERIC, 7, 0, 0),
- GATE(CLK_I2C2, "i2c2", "aclk66_peric", GATE_IP_PERIC, 8, 0, 0),
- GATE(CLK_I2C3, "i2c3", "aclk66_peric", GATE_IP_PERIC, 9, 0, 0),
- GATE(CLK_USI0, "usi0", "aclk66_peric", GATE_IP_PERIC, 10, 0, 0),
- GATE(CLK_USI1, "usi1", "aclk66_peric", GATE_IP_PERIC, 11, 0, 0),
- GATE(CLK_USI2, "usi2", "aclk66_peric", GATE_IP_PERIC, 12, 0, 0),
- GATE(CLK_USI3, "usi3", "aclk66_peric", GATE_IP_PERIC, 13, 0, 0),
- GATE(CLK_I2C_HDMI, "i2c_hdmi", "aclk66_peric", GATE_IP_PERIC, 14, 0, 0),
- GATE(CLK_TSADC, "tsadc", "aclk66_peric", GATE_IP_PERIC, 15, 0, 0),
- GATE(CLK_SPI0, "spi0", "aclk66_peric", GATE_IP_PERIC, 16, 0, 0),
- GATE(CLK_SPI1, "spi1", "aclk66_peric", GATE_IP_PERIC, 17, 0, 0),
- GATE(CLK_SPI2, "spi2", "aclk66_peric", GATE_IP_PERIC, 18, 0, 0),
- GATE(CLK_I2S1, "i2s1", "aclk66_peric", GATE_IP_PERIC, 20, 0, 0),
- GATE(CLK_I2S2, "i2s2", "aclk66_peric", GATE_IP_PERIC, 21, 0, 0),
- GATE(CLK_PCM1, "pcm1", "aclk66_peric", GATE_IP_PERIC, 22, 0, 0),
- GATE(CLK_PCM2, "pcm2", "aclk66_peric", GATE_IP_PERIC, 23, 0, 0),
- GATE(CLK_PWM, "pwm", "aclk66_peric", GATE_IP_PERIC, 24, 0, 0),
- GATE(CLK_SPDIF, "spdif", "aclk66_peric", GATE_IP_PERIC, 26, 0, 0),
- GATE(CLK_USI4, "usi4", "aclk66_peric", GATE_IP_PERIC, 28, 0, 0),
- GATE(CLK_USI5, "usi5", "aclk66_peric", GATE_IP_PERIC, 30, 0, 0),
- GATE(CLK_USI6, "usi6", "aclk66_peric", GATE_IP_PERIC, 31, 0, 0),
-
- GATE(CLK_KEYIF, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
+ GATE(CLK_UART0, "uart0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 0, 0, 0),
+ GATE(CLK_UART1, "uart1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 1, 0, 0),
+ GATE(CLK_UART2, "uart2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 2, 0, 0),
+ GATE(CLK_UART3, "uart3", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 3, 0, 0),
+ GATE(CLK_I2C0, "i2c0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 6, 0, 0),
+ GATE(CLK_I2C1, "i2c1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 7, 0, 0),
+ GATE(CLK_I2C2, "i2c2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 8, 0, 0),
+ GATE(CLK_I2C3, "i2c3", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 9, 0, 0),
+ GATE(CLK_USI0, "usi0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 10, 0, 0),
+ GATE(CLK_USI1, "usi1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 11, 0, 0),
+ GATE(CLK_USI2, "usi2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 12, 0, 0),
+ GATE(CLK_USI3, "usi3", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 13, 0, 0),
+ GATE(CLK_I2C_HDMI, "i2c_hdmi", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 14, 0, 0),
+ GATE(CLK_TSADC, "tsadc", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 15, 0, 0),
+ GATE(CLK_SPI0, "spi0", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 16, 0, 0),
+ GATE(CLK_SPI1, "spi1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 17, 0, 0),
+ GATE(CLK_SPI2, "spi2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 18, 0, 0),
+ GATE(CLK_I2S1, "i2s1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 20, 0, 0),
+ GATE(CLK_I2S2, "i2s2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 21, 0, 0),
+ GATE(CLK_PCM1, "pcm1", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 22, 0, 0),
+ GATE(CLK_PCM2, "pcm2", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 23, 0, 0),
+ GATE(CLK_PWM, "pwm", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 24, 0, 0),
+ GATE(CLK_SPDIF, "spdif", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 26, 0, 0),
+ GATE(CLK_USI4, "usi4", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 28, 0, 0),
+ GATE(CLK_USI5, "usi5", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 30, 0, 0),
+ GATE(CLK_USI6, "usi6", "mout_user_aclk66_peric",
+ GATE_IP_PERIC, 31, 0, 0),
+
+ GATE(CLK_KEYIF, "keyif", "mout_user_aclk66_peric",
+ GATE_BUS_PERIC, 22, 0, 0),
/* PERIS Block */
GATE(CLK_CHIPID, "chipid", "aclk66_psgen",
diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
index 97dcb89..14e1c8f 100644
--- a/include/dt-bindings/clock/exynos5420.h
+++ b/include/dt-bindings/clock/exynos5420.h
@@ -63,7 +63,6 @@
#define CLK_SCLK_MPHY_IXTAL24 161
/* gate clocks */
-#define CLK_ACLK66_PERIC 256
#define CLK_UART0 257
#define CLK_UART1 258
#define CLK_UART2 259
--
2.0.0.526.g5318336
next prev parent reply other threads:[~2014-06-05 20:35 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-29 21:21 [PATCH] clk: exynos5420: Keep aclk66_peric enabled during boot Doug Anderson
2014-05-29 22:29 ` Mike Turquette
2014-05-30 5:02 ` Tomasz Figa
2014-05-30 16:28 ` Doug Anderson
2014-05-30 14:00 ` Javier Martinez Canillas
2014-05-30 16:29 ` Doug Anderson
2014-05-30 16:32 ` [PATCH v2] " Doug Anderson
2014-06-05 18:48 ` Doug Anderson
2014-06-05 19:14 ` Tomasz Figa
2014-06-05 19:22 ` Doug Anderson
2014-06-05 19:31 ` Tomasz Figa
2014-06-05 20:10 ` Doug Anderson
2014-06-05 20:42 ` Doug Anderson
2014-06-05 20:35 ` Doug Anderson [this message]
2014-06-05 22:26 ` [PATCH v3] clk: exynos5420: Remove aclk66_peric from the clock tree description Tomasz Figa
2014-06-06 23:41 ` Mike Turquette
2014-06-09 18:56 ` Doug Anderson
2014-06-06 0:03 ` Mike Turquette
2014-06-06 0:46 ` Doug Anderson
2014-06-06 22:31 ` Mike Turquette
2014-06-06 23:19 ` Doug Anderson
2014-06-30 13:48 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402000514-30752-1-git-send-email-dianders@chromium.org \
--to=dianders@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).