From: steve.capper@linaro.org (Steve Capper)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 1/2] arm: mm: Introduce {pte, pmd}_isset and {pte, pmd}_isclear
Date: Mon, 16 Jun 2014 15:32:38 +0100 [thread overview]
Message-ID: <1402929159-11028-2-git-send-email-steve.capper@linaro.org> (raw)
In-Reply-To: <1402929159-11028-1-git-send-email-steve.capper@linaro.org>
Long descriptors on ARM are 64 bits, and some pte functions such as
pte_dirty return a bitwise-and of a flag with the pte value. If the
flag to be tested resides in the upper 32 bits of the pte, then we run
into the danger of the result being dropped if downcast.
For example:
gather_stats(page, md, pte_dirty(*pte), 1);
where pte_dirty(*pte) is downcast to an int.
This patch introduces a new macro pte_isset which performs the bitwise
and, then performs a double logical invert (where needed) to ensure
predictable downcasting. The logical inverse pte_isclear is also
introduced.
Equivalent pmd functions for Transparent HugePages have also been
added.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
---
arch/arm/include/asm/pgtable-3level.h | 10 +++++++---
arch/arm/include/asm/pgtable.h | 18 +++++++++++-------
2 files changed, 18 insertions(+), 10 deletions(-)
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 85c60ad..bde49f9 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -207,16 +207,20 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
#define pte_huge(pte) (pte_val(pte) && !(pte_val(pte) & PTE_TABLE_BIT))
#define pte_mkhuge(pte) (__pte(pte_val(pte) & ~PTE_TABLE_BIT))
-#define pmd_young(pmd) (pmd_val(pmd) & PMD_SECT_AF)
+#define pmd_isset(pmd, val) ((u32)(val) == (val) ? pmd_val(pmd) & (val) \
+ : !!(pmd_val(pmd) & (val)))
+#define pmd_isclear(pmd, val) (!(pmd_val(pmd) & (val)))
+
+#define pmd_young(pmd) (pmd_isset((pmd), PMD_SECT_AF))
#define __HAVE_ARCH_PMD_WRITE
-#define pmd_write(pmd) (!(pmd_val(pmd) & PMD_SECT_RDONLY))
+#define pmd_write(pmd) (pmd_isclear((pmd), PMD_SECT_RDONLY))
#define pmd_hugewillfault(pmd) (!pmd_young(pmd) || !pmd_write(pmd))
#define pmd_thp_or_huge(pmd) (pmd_huge(pmd) || pmd_trans_huge(pmd))
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#define pmd_trans_huge(pmd) (pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
+#define pmd_trans_huge(pmd) (pmd_val(pmd) && pmd_isclear((pmd), PMD_TABLE_BIT))
#define pmd_trans_splitting(pmd) (pmd_val(pmd) & PMD_SECT_SPLITTING)
#endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 5478e5d..01baef0 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -214,18 +214,22 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
+#define pte_isset(pte, val) ((u32)(val) == (val) ? pte_val(pte) & (val) \
+ : !!(pte_val(pte) & (val)))
+#define pte_isclear(pte, val) (!(pte_val(pte) & (val)))
+
#define pte_none(pte) (!pte_val(pte))
-#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT)
-#define pte_valid(pte) (pte_val(pte) & L_PTE_VALID)
+#define pte_present(pte) (pte_isset((pte), L_PTE_PRESENT))
+#define pte_valid(pte) (pte_isset((pte), L_PTE_VALID))
#define pte_accessible(mm, pte) (mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid(pte))
-#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY))
-#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY)
-#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG)
-#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN))
+#define pte_write(pte) (pte_isclear((pte), L_PTE_RDONLY))
+#define pte_dirty(pte) (pte_isset((pte), L_PTE_DIRTY))
+#define pte_young(pte) (pte_isset((pte), L_PTE_YOUNG))
+#define pte_exec(pte) (pte_isclear((pte), L_PTE_XN))
#define pte_special(pte) (0)
#define pte_valid_user(pte) \
- (pte_valid(pte) && (pte_val(pte) & L_PTE_USER) && pte_young(pte))
+ (pte_valid(pte) && pte_isset((pte), L_PTE_USER) && pte_young(pte))
#if __LINUX_ARM_ARCH__ < 6
static inline void __sync_icache_dcache(pte_t pteval)
--
1.8.1.4
next prev parent reply other threads:[~2014-06-16 14:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-16 14:32 [PATCH V4 0/2] PTE fixes for ARM LPAE Steve Capper
2014-06-16 14:32 ` Steve Capper [this message]
2014-06-20 9:12 ` [PATCH V4 1/2] arm: mm: Introduce {pte,pmd}_isset and {pte,pmd}_isclear Will Deacon
2014-06-20 10:04 ` Russell King - ARM Linux
2014-06-16 14:32 ` [PATCH V4 2/2] arm: mm: Switch back to L_PTE_WRITE Steve Capper
2014-06-20 9:21 ` Will Deacon
2014-06-20 13:23 ` Steve Capper
2014-06-20 18:17 ` Russell King - ARM Linux
2014-06-23 11:17 ` Catalin Marinas
2014-06-23 15:07 ` Steve Capper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402929159-11028-2-git-send-email-steve.capper@linaro.org \
--to=steve.capper@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).