* [PATCH] ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
@ 2014-06-18 10:31 Lee Jones
[not found] ` <CALNtEFic8xNRsx2jSj6z7Zw7YL2U+1gJ=THNw6t_LM5u8Y5o7g@mail.gmail.com>
2014-06-18 10:54 ` [PATCH v2] " Lee Jones
0 siblings, 2 replies; 5+ messages in thread
From: Lee Jones @ 2014-06-18 10:31 UTC (permalink / raw)
To: linux-arm-kernel
Two reasons for this rename. Firstly, it removes the camel case
convention which isn't used by any other platform and secondly it
matches the naming convention for the internal kernel, which can
become annoying when flipping between the two.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/boot/dts/{stih416-b2020-revE.dts => stih416-b2020e.dts} | 0
1 file changed, 0 insertions(+), 0 deletions(-)
rename arch/arm/boot/dts/{stih416-b2020-revE.dts => stih416-b2020e.dts} (100%)
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020e.dts
similarity index 100%
rename from arch/arm/boot/dts/stih416-b2020-revE.dts
rename to arch/arm/boot/dts/stih416-b2020e.dts
--
1.8.3.2
^ permalink raw reply [flat|nested] 5+ messages in thread[parent not found: <CALNtEFic8xNRsx2jSj6z7Zw7YL2U+1gJ=THNw6t_LM5u8Y5o7g@mail.gmail.com>]
* [PATCH] ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
[not found] ` <CALNtEFic8xNRsx2jSj6z7Zw7YL2U+1gJ=THNw6t_LM5u8Y5o7g@mail.gmail.com>
@ 2014-06-18 10:50 ` Lee Jones
0 siblings, 0 replies; 5+ messages in thread
From: Lee Jones @ 2014-06-18 10:50 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 18 Jun 2014, Srinivas Kandagatla wrote:
> Shouldn?t you do the same in Makefile?
Ah balls! That's what happens when you rush.
Respinning.
> On Wed, Jun 18, 2014 at 11:31 AM, Lee Jones <lee.jones@linaro.org> wrote:
>
> > Two reasons for this rename. Firstly, it removes the camel case
> > convention which isn't used by any other platform and secondly it
> > matches the naming convention for the internal kernel, which can
> > become annoying when flipping between the two.
> >
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > ---
> > arch/arm/boot/dts/{stih416-b2020-revE.dts => stih416-b2020e.dts} | 0
> > 1 file changed, 0 insertions(+), 0 deletions(-)
> > rename arch/arm/boot/dts/{stih416-b2020-revE.dts => stih416-b2020e.dts}
> > (100%)
> >
> > diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts
> > b/arch/arm/boot/dts/stih416-b2020e.dts
> > similarity index 100%
> > rename from arch/arm/boot/dts/stih416-b2020-revE.dts
> > rename to arch/arm/boot/dts/stih416-b2020e.dts
> >
> >
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2] ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
2014-06-18 10:31 [PATCH] ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts Lee Jones
[not found] ` <CALNtEFic8xNRsx2jSj6z7Zw7YL2U+1gJ=THNw6t_LM5u8Y5o7g@mail.gmail.com>
@ 2014-06-18 10:54 ` Lee Jones
2014-06-18 11:09 ` Maxime Coquelin
1 sibling, 1 reply; 5+ messages in thread
From: Lee Jones @ 2014-06-18 10:54 UTC (permalink / raw)
To: linux-arm-kernel
Two reasons for this rename. Firstly, it removes the camel case
convention which isn't used by any other platform and secondly it
matches the naming convention for the internal kernel, which can
become annoying when flipping between the two.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
v1 -> v2: Appropriate change to the Makefile.
---
arch/arm/boot/dts/Makefile | 2 +-
arch/arm/boot/dts/{stih416-b2020-revE.dts => stih416-b2020e.dts} | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename arch/arm/boot/dts/{stih416-b2020-revE.dts => stih416-b2020e.dts} (100%)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5986ff6..adb5ed9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -357,7 +357,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
stih415-b2020.dtb \
stih416-b2000.dtb \
stih416-b2020.dtb \
- stih416-b2020-revE.dtb
+ stih416-b2020e.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-cubieboard.dtb \
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020e.dts
similarity index 100%
rename from arch/arm/boot/dts/stih416-b2020-revE.dts
rename to arch/arm/boot/dts/stih416-b2020e.dts
--
1.8.3.2
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v2] ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
2014-06-18 10:54 ` [PATCH v2] " Lee Jones
@ 2014-06-18 11:09 ` Maxime Coquelin
2014-06-18 11:21 ` Lee Jones
0 siblings, 1 reply; 5+ messages in thread
From: Maxime Coquelin @ 2014-06-18 11:09 UTC (permalink / raw)
To: linux-arm-kernel
Hi Lee,
On 06/18/2014 12:54 PM, Lee Jones wrote:
> Two reasons for this rename. Firstly, it removes the camel case
> convention which isn't used by any other platform and secondly it
> matches the naming convention for the internal kernel, which can
> become annoying when flipping between the two.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
It will be part of the STi pull-request for 3.16 fixes.
Thanks,
Maxime
> ---
> v1 -> v2: Appropriate change to the Makefile.
> ---
> arch/arm/boot/dts/Makefile | 2 +-
> arch/arm/boot/dts/{stih416-b2020-revE.dts => stih416-b2020e.dts} | 0
> 2 files changed, 1 insertion(+), 1 deletion(-)
> rename arch/arm/boot/dts/{stih416-b2020-revE.dts => stih416-b2020e.dts} (100%)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5986ff6..adb5ed9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -357,7 +357,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
> stih415-b2020.dtb \
> stih416-b2000.dtb \
> stih416-b2020.dtb \
> - stih416-b2020-revE.dtb
> + stih416-b2020e.dtb
> dtb-$(CONFIG_MACH_SUN4I) += \
> sun4i-a10-a1000.dtb \
> sun4i-a10-cubieboard.dtb \
> diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020e.dts
> similarity index 100%
> rename from arch/arm/boot/dts/stih416-b2020-revE.dts
> rename to arch/arm/boot/dts/stih416-b2020e.dts
>
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v2] ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
2014-06-18 11:09 ` Maxime Coquelin
@ 2014-06-18 11:21 ` Lee Jones
0 siblings, 0 replies; 5+ messages in thread
From: Lee Jones @ 2014-06-18 11:21 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 18 Jun 2014, Maxime Coquelin wrote:
> Hi Lee,
>
> On 06/18/2014 12:54 PM, Lee Jones wrote:
> >Two reasons for this rename. Firstly, it removes the camel case
> >convention which isn't used by any other platform and secondly it
> >matches the naming convention for the internal kernel, which can
> >become annoying when flipping between the two.
> >
> >Signed-off-by: Lee Jones <lee.jones@linaro.org>
>
> Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
>
> It will be part of the STi pull-request for 3.16 fixes.
Thanks for taking the patch. :)
Just a quick side note. As a maintainer, if you're going to take the
patch there's no requirement to publicly Ack it. Just let the
submitter know that you've applied it to your tree.
I use Acks for 2 things; when a patch touches code that I maintain,
but is going in via a different tree, or as a marker if there is some
reason I can't apply it to my tree right away (waiting on dependencies
etc), but equally do not wish to review the same patch twice.
> >---
> >v1 -> v2: Appropriate change to the Makefile.
> >---
> > arch/arm/boot/dts/Makefile | 2 +-
> > arch/arm/boot/dts/{stih416-b2020-revE.dts => stih416-b2020e.dts} | 0
> > 2 files changed, 1 insertion(+), 1 deletion(-)
> > rename arch/arm/boot/dts/{stih416-b2020-revE.dts => stih416-b2020e.dts} (100%)
> >
> >diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> >index 5986ff6..adb5ed9 100644
> >--- a/arch/arm/boot/dts/Makefile
> >+++ b/arch/arm/boot/dts/Makefile
> >@@ -357,7 +357,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
> > stih415-b2020.dtb \
> > stih416-b2000.dtb \
> > stih416-b2020.dtb \
> >- stih416-b2020-revE.dtb
> >+ stih416-b2020e.dtb
> > dtb-$(CONFIG_MACH_SUN4I) += \
> > sun4i-a10-a1000.dtb \
> > sun4i-a10-cubieboard.dtb \
> >diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020e.dts
> >similarity index 100%
> >rename from arch/arm/boot/dts/stih416-b2020-revE.dts
> >rename to arch/arm/boot/dts/stih416-b2020e.dts
> >
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-06-18 11:21 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-06-18 10:31 [PATCH] ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts Lee Jones
[not found] ` <CALNtEFic8xNRsx2jSj6z7Zw7YL2U+1gJ=THNw6t_LM5u8Y5o7g@mail.gmail.com>
2014-06-18 10:50 ` Lee Jones
2014-06-18 10:54 ` [PATCH v2] " Lee Jones
2014-06-18 11:09 ` Maxime Coquelin
2014-06-18 11:21 ` Lee Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).