[PATCH] ARM: i.MX: Remove Freescale i.MX27 IP Camera board support

[shc_work@mail.ru (Alexander Shiyan)]

The board has no insufficient support to be fully functional and seems
has no users. This patch removes support for this board. However, the
support may be added in the future by using the devicetree.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/mach-imx/Kconfig           |  9 -----
 arch/arm/mach-imx/Makefile          |  1 -
 arch/arm/mach-imx/mach-imx27ipcam.c | 77 -------------------------------------
 3 files changed, 87 deletions(-)
 delete mode 100644 arch/arm/mach-imx/mach-imx27ipcam.c

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index b50d15b..edaed78 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -394,15 +394,6 @@ config MACH_MXT_TD60
 	  Include support for i-MXT (aka td60) platform. This
 	  includes specific configurations for the module and its peripherals.
 
-config MACH_IMX27IPCAM
-	bool "IMX27 IPCAM platform"
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX27
-	help
-	  Include support for IMX27 IPCAM platform. This includes specific
-	  configurations for the board and its peripherals.
-
 config MACH_IMX27_DT
 	bool "Support i.MX27 platforms from device tree"
 	select SOC_IMX27
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 2c8ca00..a364e20 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -66,7 +66,6 @@ obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
 obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
-obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
 obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
 
 # i.MX31 based machines
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
deleted file mode 100644
index bb3ca04..0000000
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "common.h"
-#include "devices-imx27.h"
-#include "iomux-mx27.h"
-
-static const int mx27ipcam_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static void __init mx27ipcam_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
-		"mx27ipcam");
-
-	imx27_add_imx_uart0(NULL);
-	imx27_add_fec(NULL);
-	imx27_add_imx2_wdt();
-}
-
-static void __init mx27ipcam_timer_init(void)
-{
-	mx27_clocks_init(25000000);
-}
-
-MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.init_time	= mx27ipcam_timer_init,
-	.init_machine = mx27ipcam_init,
-	.restart	= mxc_restart,
-MACHINE_END
-- 
1.8.5.5