From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 7/9] arm64: KVM: add trap handlers for AArch32 debug registers
Date: Fri, 20 Jun 2014 14:00:05 +0100 [thread overview]
Message-ID: <1403269207-1625-8-git-send-email-marc.zyngier@arm.com> (raw)
In-Reply-To: <1403269207-1625-1-git-send-email-marc.zyngier@arm.com>
Add handlers for all the AArch32 debug registers that are accessible
from EL0 or EL1. The code follow the same strategy as the AArch64
counterpart with regards to tracking the dirty state of the debug
registers.
Reviewed-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/include/asm/kvm_asm.h | 9 +++
arch/arm64/kvm/sys_regs.c | 144 ++++++++++++++++++++++++++++++++++++++-
2 files changed, 151 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index 12f9dd7..993a7db 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -93,6 +93,15 @@
#define c10_AMAIR0 (AMAIR_EL1 * 2) /* Aux Memory Attr Indirection Reg */
#define c10_AMAIR1 (c10_AMAIR0 + 1)/* Aux Memory Attr Indirection Reg */
#define c14_CNTKCTL (CNTKCTL_EL1 * 2) /* Timer Control Register (PL1) */
+
+#define cp14_DBGDSCRext (MDSCR_EL1 * 2)
+#define cp14_DBGBCR0 (DBGBCR0_EL1 * 2)
+#define cp14_DBGBVR0 (DBGBVR0_EL1 * 2)
+#define cp14_DBGBXVR0 (cp14_DBGBVR0 + 1)
+#define cp14_DBGWCR0 (DBGWCR0_EL1 * 2)
+#define cp14_DBGWVR0 (DBGWVR0_EL1 * 2)
+#define cp14_DBGDCCINT (MDCCINT_EL1 * 2)
+
#define NR_COPRO_REGS (NR_SYS_REGS * 2)
#define ARM_EXCEPTION_IRQ 0
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 9147b0c..daa635e 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -483,12 +483,153 @@ static const struct sys_reg_desc sys_reg_descs[] = {
NULL, reset_val, FPEXC32_EL2, 0x70 },
};
-/* Trapped cp14 registers */
+static bool trap_dbgidr(struct kvm_vcpu *vcpu,
+ const struct sys_reg_params *p,
+ const struct sys_reg_desc *r)
+{
+ if (p->is_write) {
+ return ignore_write(vcpu, p);
+ } else {
+ u64 dfr = read_cpuid(ID_AA64DFR0_EL1);
+ u64 pfr = read_cpuid(ID_AA64PFR0_EL1);
+ u32 el3 = !!((pfr >> 12) & 0xf);
+
+ *vcpu_reg(vcpu, p->Rt) = ((((dfr >> 20) & 0xf) << 28) |
+ (((dfr >> 12) & 0xf) << 24) |
+ (((dfr >> 28) & 0xf) << 20) |
+ (6 << 16) | (el3 << 14) | (el3 << 12));
+ return true;
+ }
+}
+
+static bool trap_debug32(struct kvm_vcpu *vcpu,
+ const struct sys_reg_params *p,
+ const struct sys_reg_desc *r)
+{
+ if (p->is_write) {
+ vcpu_cp14(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
+ vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
+ } else {
+ *vcpu_reg(vcpu, p->Rt) = vcpu_cp14(vcpu, r->reg);
+ }
+
+ return true;
+}
+
+#define DBG_BCR_BVR_WCR_WVR(n) \
+ /* DBGBVRn */ \
+ { Op1( 0), CRn( 0), CRm((n)), Op2( 4), trap_debug32, \
+ NULL, (cp14_DBGBVR0 + (n) * 2) }, \
+ /* DBGBCRn */ \
+ { Op1( 0), CRn( 0), CRm((n)), Op2( 5), trap_debug32, \
+ NULL, (cp14_DBGBCR0 + (n) * 2) }, \
+ /* DBGWVRn */ \
+ { Op1( 0), CRn( 0), CRm((n)), Op2( 6), trap_debug32, \
+ NULL, (cp14_DBGWVR0 + (n) * 2) }, \
+ /* DBGWCRn */ \
+ { Op1( 0), CRn( 0), CRm((n)), Op2( 7), trap_debug32, \
+ NULL, (cp14_DBGWCR0 + (n) * 2) }
+
+#define DBGBXVR(n) \
+ { Op1( 0), CRn( 1), CRm((n)), Op2( 1), trap_debug32, \
+ NULL, cp14_DBGBXVR0 + n * 2 }
+
+/*
+ * Trapped cp14 registers. We generally ignore most of the external
+ * debug, on the principle that they don't really make sense to a
+ * guest. Revisit this one day, whould this principle change.
+ */
static const struct sys_reg_desc cp14_regs[] = {
+ /* DBGIDR */
+ { Op1( 0), CRn( 0), CRm( 0), Op2( 0), trap_dbgidr },
+ /* DBGDTRRXext */
+ { Op1( 0), CRn( 0), CRm( 0), Op2( 2), trap_raz_wi },
+
+ DBG_BCR_BVR_WCR_WVR(0),
+ /* DBGDSCRint */
+ { Op1( 0), CRn( 0), CRm( 1), Op2( 0), trap_raz_wi },
+ DBG_BCR_BVR_WCR_WVR(1),
+ /* DBGDCCINT */
+ { Op1( 0), CRn( 0), CRm( 2), Op2( 0), trap_debug32 },
+ /* DBGDSCRext */
+ { Op1( 0), CRn( 0), CRm( 2), Op2( 2), trap_debug32 },
+ DBG_BCR_BVR_WCR_WVR(2),
+ /* DBGDTR[RT]Xint */
+ { Op1( 0), CRn( 0), CRm( 3), Op2( 0), trap_raz_wi },
+ /* DBGDTR[RT]Xext */
+ { Op1( 0), CRn( 0), CRm( 3), Op2( 2), trap_raz_wi },
+ DBG_BCR_BVR_WCR_WVR(3),
+ DBG_BCR_BVR_WCR_WVR(4),
+ DBG_BCR_BVR_WCR_WVR(5),
+ /* DBGWFAR */
+ { Op1( 0), CRn( 0), CRm( 6), Op2( 0), trap_raz_wi },
+ /* DBGOSECCR */
+ { Op1( 0), CRn( 0), CRm( 6), Op2( 2), trap_raz_wi },
+ DBG_BCR_BVR_WCR_WVR(6),
+ /* DBGVCR */
+ { Op1( 0), CRn( 0), CRm( 7), Op2( 0), trap_debug32 },
+ DBG_BCR_BVR_WCR_WVR(7),
+ DBG_BCR_BVR_WCR_WVR(8),
+ DBG_BCR_BVR_WCR_WVR(9),
+ DBG_BCR_BVR_WCR_WVR(10),
+ DBG_BCR_BVR_WCR_WVR(11),
+ DBG_BCR_BVR_WCR_WVR(12),
+ DBG_BCR_BVR_WCR_WVR(13),
+ DBG_BCR_BVR_WCR_WVR(14),
+ DBG_BCR_BVR_WCR_WVR(15),
+
+ /* DBGDRAR (32bit) */
+ { Op1( 0), CRn( 1), CRm( 0), Op2( 0), trap_raz_wi },
+
+ DBGBXVR(0),
+ /* DBGOSLAR */
+ { Op1( 0), CRn( 1), CRm( 0), Op2( 4), trap_raz_wi },
+ DBGBXVR(1),
+ /* DBGOSLSR */
+ { Op1( 0), CRn( 1), CRm( 1), Op2( 4), trap_oslsr_el1 },
+ DBGBXVR(2),
+ DBGBXVR(3),
+ /* DBGOSDLR */
+ { Op1( 0), CRn( 1), CRm( 3), Op2( 4), trap_raz_wi },
+ DBGBXVR(4),
+ /* DBGPRCR */
+ { Op1( 0), CRn( 1), CRm( 4), Op2( 4), trap_raz_wi },
+ DBGBXVR(5),
+ DBGBXVR(6),
+ DBGBXVR(7),
+ DBGBXVR(8),
+ DBGBXVR(9),
+ DBGBXVR(10),
+ DBGBXVR(11),
+ DBGBXVR(12),
+ DBGBXVR(13),
+ DBGBXVR(14),
+ DBGBXVR(15),
+
+ /* DBGDSAR (32bit) */
+ { Op1( 0), CRn( 2), CRm( 0), Op2( 0), trap_raz_wi },
+
+ /* DBGDEVID2 */
+ { Op1( 0), CRn( 7), CRm( 0), Op2( 7), trap_raz_wi },
+ /* DBGDEVID1 */
+ { Op1( 0), CRn( 7), CRm( 1), Op2( 7), trap_raz_wi },
+ /* DBGDEVID */
+ { Op1( 0), CRn( 7), CRm( 2), Op2( 7), trap_raz_wi },
+ /* DBGCLAIMSET */
+ { Op1( 0), CRn( 7), CRm( 8), Op2( 6), trap_raz_wi },
+ /* DBGCLAIMCLR */
+ { Op1( 0), CRn( 7), CRm( 9), Op2( 6), trap_raz_wi },
+ /* DBGAUTHSTATUS */
+ { Op1( 0), CRn( 7), CRm(14), Op2( 6), trap_dbgauthstatus_el1 },
};
/* Trapped cp14 64bit registers */
static const struct sys_reg_desc cp14_64_regs[] = {
+ /* DBGDRAR (64bit) */
+ { Op1( 0), CRm( 1), .access = trap_raz_wi },
+
+ /* DBGDSAR (64bit) */
+ { Op1( 0), CRm( 2), .access = trap_raz_wi },
};
/*
@@ -536,7 +677,6 @@ static const struct sys_reg_desc cp15_regs[] = {
{ Op1( 0), CRn(10), CRm( 3), Op2( 0), access_vm_reg, NULL, c10_AMAIR0 },
{ Op1( 0), CRn(10), CRm( 3), Op2( 1), access_vm_reg, NULL, c10_AMAIR1 },
{ Op1( 0), CRn(13), CRm( 0), Op2( 1), access_vm_reg, NULL, c13_CID },
-
};
static const struct sys_reg_desc cp15_64_regs[] = {
--
1.8.3.4
next prev parent reply other threads:[~2014-06-20 13:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-20 12:59 [PATCH v3 0/9] arm64: KVM: debug infrastructure support Marc Zyngier
2014-06-20 12:59 ` [PATCH v3 1/9] arm64: KVM: rename pm_fake handler to trap_raz_wi Marc Zyngier
2014-07-09 9:27 ` Christoffer Dall
2014-07-09 9:36 ` Marc Zyngier
2014-06-20 13:00 ` [PATCH v3 2/9] arm64: move DBG_MDSCR_* to asm/debug-monitors.h Marc Zyngier
2014-06-20 13:00 ` [PATCH v3 3/9] arm64: KVM: add trap handlers for AArch64 debug registers Marc Zyngier
2014-07-09 9:38 ` Christoffer Dall
2014-07-09 11:09 ` Marc Zyngier
2014-07-09 14:52 ` Christoffer Dall
2014-07-09 16:20 ` Marc Zyngier
2014-06-20 13:00 ` [PATCH v3 4/9] arm64: KVM: common infrastructure for handling AArch32 CP14/CP15 Marc Zyngier
2014-06-20 13:00 ` [PATCH v3 5/9] arm64: KVM: use separate tables for AArch32 32 and 64bit traps Marc Zyngier
2014-06-20 13:00 ` [PATCH v3 6/9] arm64: KVM: check ordering of all system register tables Marc Zyngier
2014-06-20 13:00 ` Marc Zyngier [this message]
2014-07-09 9:43 ` [PATCH v3 7/9] arm64: KVM: add trap handlers for AArch32 debug registers Christoffer Dall
2014-06-20 13:00 ` [PATCH v3 8/9] arm64: KVM: implement lazy world switch for " Marc Zyngier
2014-07-09 9:45 ` Christoffer Dall
2014-07-09 11:18 ` Marc Zyngier
2014-06-20 13:00 ` [PATCH v3 9/9] arm64: KVM: enable trapping of all " Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403269207-1625-8-git-send-email-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).