linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC/PATCH 06/12] clk: qcom: Add MSM8960's HFPLLs
Date: Tue, 24 Jun 2014 17:06:17 -0700	[thread overview]
Message-ID: <1403654783-7176-7-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1403654783-7176-1-git-send-email-sboyd@codeaurora.org>

Describe the HFPLLs present on MSM8960 devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/gcc-msm8960.c | 82 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index f4ffd91901f8..d04fc99541e4 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -30,6 +30,7 @@
 #include "clk-pll.h"
 #include "clk-rcg.h"
 #include "clk-branch.h"
+#include "clk-hfpll.h"
 #include "reset.h"
 
 static struct clk_pll pll3 = {
@@ -75,6 +76,84 @@ static struct clk_regmap pll8_vote = {
 	},
 };
 
+static struct hfpll_data hfpll0_data = {
+	.mode_reg = 0x3200,
+	.l_reg = 0x3208,
+	.m_reg = 0x320c,
+	.n_reg = 0x3210,
+	.config_reg = 0x3204,
+	.status_reg = 0x321c,
+        .config_val = 0x7845c665,
+        .droop_reg = 0x3214,
+        .droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll0 = {
+	.d = &hfpll0_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll0",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
+};
+
+static struct hfpll_data hfpll1_data = {
+	.mode_reg = 0x3300,
+	.l_reg = 0x3308,
+	.m_reg = 0x330c,
+	.n_reg = 0x3310,
+	.config_reg = 0x3304,
+	.status_reg = 0x331c,
+        .config_val = 0x7845c665,
+        .droop_reg = 0x3314,
+        .droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll1 = {
+	.d = &hfpll1_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll1",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
+};
+
+static struct hfpll_data hfpll_l2_data = {
+	.mode_reg = 0x3400,
+	.l_reg = 0x3408,
+	.m_reg = 0x340c,
+	.n_reg = 0x3410,
+	.config_reg = 0x3404,
+	.status_reg = 0x341c,
+        .config_val = 0x7845c665,
+        .droop_reg = 0x3414,
+        .droop_val = 0x0108c000,
+	.min_rate = 600000000UL,
+	.max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll_l2 = {
+	.d = &hfpll_l2_data,
+	.clkr.hw.init = &(struct clk_init_data){
+		.parent_names = (const char *[]){ "pxo" },
+		.num_parents = 1,
+		.name = "hfpll_l2",
+		.ops = &clk_ops_hfpll,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	.lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
+};
+
 static struct clk_pll pll14 = {
 	.l_reg = 0x31c4,
 	.m_reg = 0x31c8,
@@ -2763,6 +2842,9 @@ static struct clk_regmap *gcc_msm8960_clks[] = {
 	[PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr,
 	[PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr,
 	[RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr,
+	[PLL9] = &hfpll0.clkr,
+	[PLL10] = &hfpll1.clkr,
+	[PLL12] = &hfpll_l2.clkr,
 };
 
 static const struct qcom_reset_map gcc_msm8960_resets[] = {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

  parent reply	other threads:[~2014-06-25  0:06 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-25  0:06 [RFC/PATCH 00/12] Krait clocks + Krait CPUfreq Stephen Boyd
2014-06-25  0:06 ` [RFC/PATCH 01/12] ARM: Add Krait L2 register accessor functions Stephen Boyd
2014-06-25  0:06 ` [RFC/PATCH 02/12] clk: Add safe switch hook Stephen Boyd
2014-07-29  6:05   ` Mike Turquette
2014-07-29  8:59     ` Thomas Abraham
2014-09-10  1:44       ` dbasehore .
2014-06-25  0:06 ` [RFC/PATCH 03/12] clk: qcom: Add support for muxes, dividers, and mux dividers Stephen Boyd
2014-07-14 10:06   ` pramod gurav
2014-06-25  0:06 ` [RFC/PATCH 04/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Stephen Boyd
2014-06-25  0:06 ` [RFC/PATCH 05/12] clk: qcom: Add HFPLL driver Stephen Boyd
2014-06-25  0:06 ` Stephen Boyd [this message]
2014-07-14 10:19   ` [RFC/PATCH 06/12] clk: qcom: Add MSM8960's HFPLLs pramod gurav
2014-06-25  0:06 ` [RFC/PATCH 07/12] clk: qcom: Add support for Krait clocks Stephen Boyd
2014-06-25  0:06 ` [RFC/PATCH 08/12] clk: qcom: Add KPSS ACC/GCC driver Stephen Boyd
2014-06-25  0:06 ` [RFC/PATCH 09/12] clk: qcom: Add Krait clock controller driver Stephen Boyd
2014-07-14 10:25   ` pramod gurav
2014-06-25  0:06 ` [RFC/PATCH 10/12] cpufreq: Add a cpufreq-krait based on cpufreq-cpu0 Stephen Boyd
2014-06-25  0:52   ` Stephen Boyd
2014-06-25  8:47   ` Viresh Kumar
2014-06-25  0:06 ` [RFC/PATCH 11/12] cpufreq: Add module to register cpufreq-krait device Stephen Boyd
2014-06-25  0:06 ` [RFC/PATCH 12/12] ARM: dts: qcom: Add necessary DT data for Krait cpufreq Stephen Boyd
2014-07-15 10:33 ` [RFC/PATCH 00/12] Krait clocks + Krait CPUfreq pramod gurav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1403654783-7176-7-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).