From mboxrd@z Thu Jan 1 00:00:00 1970 From: nicolas.ferre@atmel.com (Nicolas Ferre) Date: Wed, 25 Jun 2014 11:43:56 +0200 Subject: [PATCH] misc: atmel_pwm: fix Kconfig symbols In-Reply-To: <20140618093109.GQ19375@piout.net> References: <20140618093109.GQ19375@piout.net> Message-ID: <1403689436-6664-1-git-send-email-nicolas.ferre@atmel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org AT91 symbols AT91SAM9263, AT91SAM9RL, and AT91SAM9G45 do not exist and this patch change them their correct ARCH_* version. These symbols are chosen instead of the SOC_* one because this driver is not converted to DT. Anyway, the ATMEL_PWM symbol and the associated driver will be removed soon during the move to the PWM sub-system. Reported-by: Paul Bolle Signed-off-by: Nicolas Ferre --- Guys, The rework is delayed to 3.17. So, in the meantime, I send this little patch as a fix for 3.16. Bye, drivers/misc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index a43d0c467274..ee9402324a23 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -54,7 +54,7 @@ config AD525X_DPOT_SPI config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" depends on HAVE_CLK - depends on AVR32 || AT91SAM9263 || AT91SAM9RL || AT91SAM9G45 + depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 help This option enables device driver support for the PWM channels on certain Atmel processors. Pulse Width Modulation is used for -- 1.8.2.2