From: festevam@gmail.com (Fabio Estevam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: mx25: Add basic suspend/resume support
Date: Wed, 25 Jun 2014 16:19:09 -0300 [thread overview]
Message-ID: <1403723949-9183-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam@freescale.com>
Tested basic suspend/resume on a mx25pdk:
root at freescale /$ echo mem > /sys/power/state
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
(Press the keypad)
PM: suspend of devices complete after 5.637 msecs
PM: late suspend of devices complete after 1.649 msecs
PM: noirq suspend of devices complete after 1.874 msecs
PM: noirq resume of devices complete after 1.643 msecs
PM: early resume of devices complete after 1.923 msecs
PM: resume of devices complete after 62.884 msecs
Restarting tasks ... done.
fec 50038000.ethernet eth0: Link is Down
fec 50038000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
root at freescale /$
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/mach-imx/Makefile | 2 +-
arch/arm/mach-imx/imx25-dt.c | 2 ++
arch/arm/mach-imx/pm-imx25.c | 35 +++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/pm-imx25.h | 13 +++++++++++++
4 files changed, 51 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-imx/pm-imx25.c
create mode 100644 arch/arm/mach-imx/pm-imx25.h
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index a364e20..ddc28d4 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -3,7 +3,7 @@ obj-y := time.o cpu.o system.o irq-common.o
obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
-obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o pm-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index 42a65e0..39babdf 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -16,6 +16,7 @@
#include <asm/mach/time.h>
#include "common.h"
#include "mx25.h"
+#include "pm-imx25.h"
static void __init imx25_dt_init(void)
{
@@ -38,6 +39,7 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
+ .init_late = mx25_pm_init,
.init_time = imx25_timer_init,
.init_machine = imx25_dt_init,
.dt_compat = imx25_dt_board_compat,
diff --git a/arch/arm/mach-imx/pm-imx25.c b/arch/arm/mach-imx/pm-imx25.c
new file mode 100644
index 0000000..2463548
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx25.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include "pm-imx25.h"
+
+static int mx25_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ cpu_do_idle();
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const struct platform_suspend_ops mx25_suspend_ops = {
+ .enter = mx25_suspend_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+void __init mx25_pm_init(void)
+{
+ suspend_set_ops(&mx25_suspend_ops);
+}
diff --git a/arch/arm/mach-imx/pm-imx25.h b/arch/arm/mach-imx/pm-imx25.h
new file mode 100644
index 0000000..41da794
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx25.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifdef CONFIG_PM
+void mx25_pm_init(void);
+#else
+#define mx25_pm_init NULL
+#endif
--
1.8.3.2
next reply other threads:[~2014-06-25 19:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 19:19 Fabio Estevam [this message]
2014-07-01 6:32 ` [PATCH] ARM: mx25: Add basic suspend/resume support Shawn Guo
-- strict thread matches above, loose matches on Subject: below --
2016-02-02 21:18 Fabio Estevam
2016-02-02 21:34 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403723949-9183-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).