linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: agross@codeaurora.org (Andy Gross)
To: linux-arm-kernel@lists.infradead.org
Subject: [Patch v7 0/3] DWC3 USB support for Qualcomm platform
Date: Mon, 30 Jun 2014 11:03:50 -0500	[thread overview]
Message-ID: <1404144233-17222-1-git-send-email-agross@codeaurora.org> (raw)

These patches add basic support for USB3.0 controllers found
on MSM platforms. USB3.0 core is based on Synopsys DesignWare 
SuperSpeed IP. 

This work was started by Ivan Ivanov and went through a number of iterations.  I
picked these patches up and did a little rework to get them working.

Changes since v6:
* Renamed all MSM references to qcom, including file names
* Removed direct TCSR manipulation.  This done from new TCSR driver.
* Added defines for register bits
* XO clk is optional on some platforms.  Corrected logic to handle this.
* Ignore set_voltage failures.  This allows us to support dummy regulators on
  platforms where there is no voltage control.
* Reworked devicetree binding to remove TCSR reg resources

Changes since v5:
* devicetree bindings descriptions fixes 
* Fixed NULL pointer dereferences in dev_prink's
* Removed extra space in "sleep " clock name

Changes since v4:
* Substitute references to "wc3" with just "dw" in USB PHY drivers and
  file names. This is to indicate that the PHY's are DesignWare, but
  not necessarily related to DWC3 IP core. 

Changes since v3:
* Remove "_clk" suffix from clock names
* Clarify required child node for qcom,dwc3
* Fix comments in functions headers
* Use dbg instead err in drivers probe functions.

Changes since v2:
* Several improvements in devicetree bindings description
* Disable regulators in glue layer if there is error during 
  ioremap.

Changes since first version:
* Split devicetree bindings description file to separate patch
* Address comments for device bindings description
* Fix typo in 'gdsc' requlator name.

Ivan T. Ivanov (3):
  usb: dwc3: Add Qualcomm DWC3 glue layer driver
  usb: phy: Add Qualcomm DWC3 HS/SS PHY drivers
  usb: dwc3: qcom: Add device tree binding

 .../devicetree/bindings/usb/qcom,dwc3.txt          |  104 ++++++
 drivers/usb/dwc3/Kconfig                           |    9 +
 drivers/usb/dwc3/Makefile                          |    1 +
 drivers/usb/dwc3/dwc3-qcom.c                       |  153 ++++++++
 drivers/usb/phy/Kconfig                            |   11 +
 drivers/usb/phy/Makefile                           |    2 +
 drivers/usb/phy/phy-qcom-hsusb.c                   |  348 ++++++++++++++++++
 drivers/usb/phy/phy-qcom-ssusb.c                   |  385 ++++++++++++++++++++
 8 files changed, 1013 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/qcom,dwc3.txt
 create mode 100644 drivers/usb/dwc3/dwc3-qcom.c
 create mode 100644 drivers/usb/phy/phy-qcom-hsusb.c
 create mode 100644 drivers/usb/phy/phy-qcom-ssusb.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

             reply	other threads:[~2014-06-30 16:03 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-30 16:03 Andy Gross [this message]
2014-06-30 16:03 ` [Patch v7 1/3] usb: dwc3: Add Qualcomm DWC3 glue layer driver Andy Gross
2014-06-30 16:52   ` Felipe Balbi
2014-07-18  2:10   ` Jingoo Han
2014-06-30 16:03 ` [Patch v7 2/3] usb: phy: Add Qualcomm DWC3 HS/SS PHY drivers Andy Gross
2014-06-30 17:00   ` Felipe Balbi
     [not found]   ` <CA+neC=McWS8=iSi2XShJyvc85Aw4PSmF-osNpVgJv42d9or1WQ@mail.gmail.com>
2014-07-17 10:30     ` kiran.padwal at smartplayin.com
2014-07-17 18:28       ` Andy Gross
2014-06-30 16:03 ` [Patch v7 3/3] usb: dwc3: qcom: Add device tree binding Andy Gross
2014-06-30 17:37   ` Kumar Gala
2014-07-01  5:04   ` Rob Herring
2014-07-01 18:01     ` Andy Gross
2014-07-01 19:47       ` Rob Herring
2014-07-02  8:43         ` Ivan T. Ivanov
2014-07-02 12:48           ` Arnd Bergmann
2014-07-02 15:54             ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404144233-17222-1-git-send-email-agross@codeaurora.org \
    --to=agross@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).