From: shawn.guo@freescale.com (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: imx: fix shared gate clock
Date: Mon, 7 Jul 2014 10:53:51 +0800 [thread overview]
Message-ID: <1404701631-13870-1-git-send-email-shawn.guo@freescale.com> (raw)
Let's say clock A and B are two gate clocks that share the same register
bit in hardware. Therefore they are registered as shared gate clocks
with imx_clk_gate2_shared().
In a scenario that only clock A is enabled by clk_enable(A) while B is
not used, the shared gate will be unexpectedly disabled in hardware.
It happens because clk_enable(A) increments the share_count from 0 to 1,
while clock B is unused to clock core, and therefore the core function
will just disable B by calling clk->ops->disable() directly. The
consequence of that call is share_count is decremented to 0 and the gate
is disabled in hardware, even though clock A is still in use.
The patch fixes the issue by initializing the share_count per hardware
state and returns enable state per share_count from .is_enabled() hook,
in case it's a shared gate.
While at it, add a check in clk_gate2_disable() to ensure it's never
called with a zero share_count.
Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Fixes: f9f28cdf2167 ("ARM: imx: add shared gate clock support")
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
---
Fabio,
Per my testing, it fixes the shared gate clock issue you reported.
But I'd like to get your confirmation before I ask arm-soc folks to
apply it for 3.16-rc.
Shawn
arch/arm/mach-imx/clk-gate2.c | 31 +++++++++++++++++++++++--------
1 file changed, 23 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
index 4ba587da89d2..84acdfd1d715 100644
--- a/arch/arm/mach-imx/clk-gate2.c
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -67,8 +67,12 @@ static void clk_gate2_disable(struct clk_hw *hw)
spin_lock_irqsave(gate->lock, flags);
- if (gate->share_count && --(*gate->share_count) > 0)
- goto out;
+ if (gate->share_count) {
+ if (WARN_ON(*gate->share_count == 0))
+ goto out;
+ else if (--(*gate->share_count) > 0)
+ goto out;
+ }
reg = readl(gate->reg);
reg &= ~(3 << gate->bit_idx);
@@ -78,19 +82,26 @@ out:
spin_unlock_irqrestore(gate->lock, flags);
}
-static int clk_gate2_is_enabled(struct clk_hw *hw)
+static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
{
- u32 reg;
- struct clk_gate2 *gate = to_clk_gate2(hw);
+ u32 val = readl(reg);
- reg = readl(gate->reg);
-
- if (((reg >> gate->bit_idx) & 1) == 1)
+ if (((val >> bit_idx) & 1) == 1)
return 1;
return 0;
}
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+ struct clk_gate2 *gate = to_clk_gate2(hw);
+
+ if (gate->share_count)
+ return !!(*gate->share_count);
+ else
+ return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
+}
+
static struct clk_ops clk_gate2_ops = {
.enable = clk_gate2_enable,
.disable = clk_gate2_disable,
@@ -116,6 +127,10 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
gate->bit_idx = bit_idx;
gate->flags = clk_gate2_flags;
gate->lock = lock;
+
+ /* Initialize share_count per hardware state */
+ if (share_count)
+ *share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0;
gate->share_count = share_count;
init.name = name;
--
1.8.3.2
next reply other threads:[~2014-07-07 2:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-07 2:53 Shawn Guo [this message]
2014-07-07 12:49 ` [PATCH] ARM: imx: fix shared gate clock Fabio Estevam
2014-07-07 13:56 ` Shawn Guo
2014-07-08 4:23 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404701631-13870-1-git-send-email-shawn.guo@freescale.com \
--to=shawn.guo@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).