From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 0/7] arm: Add basic support for Mediatek Cortex-A7 SoCs
Date: Mon, 7 Jul 2014 17:13:01 +0200 [thread overview]
Message-ID: <1404745988-32558-1-git-send-email-matthias.bgg@gmail.com> (raw)
Tenth round for the Mediatek basic support patches.
The main change is the return of IOMEM_ERR_PTR in case of error in
of_io_request_and_map.
The call follows the same logic as devm_ioremap_resource.
For the changes of the of_io_request_and_map patch I deleted the ack from Grant Likely, as the patch changes significantly.
In the case of the dt bindings for the timer I left the ack lines from Soeren and Rob. I hope there is no problem with that.
---
This patch set adds basic support for the Mediatek Cortex-A7 SoCs.
Support is quite basic, as the only component working up to now are the
timers.
The patch series is build against tag v3.16-rc1 from torvalds/master tree.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Changes for v10:
1. OF address
- return IOMEM_ERR_PTR in case of error
2. clocksource timer
- check for IS_ERR when calling of_io_request_and_map
3. clocksource DT binding
- remove clock-names property
Changes for v9:
- rebase against tip branch
Changes for v8:
1. OF address
- fix style issue
2. clocksource driver
- fix style issue
3. Basic SoC support
- define the clock node as a simple-bus
- delete unused clock-ranges
Changes for v7:
1. OF address
- add of_io_request_and_map
2. Clocksource timer
- use pr_warnings and error handling instead of panic
- fix macro parentheses
- use of_io_request_and_map
3. Others
- rename SoC DT bindings to mediatek.txt
- fixed typos
Changes for v6:
- fix compatible string of the timer
- encapsulate timer setup in function
- add more information to the timer commit message
- add address in timer DTS bindings documentation
Changes for v5:
1. Clocksource timer
- Change the compatible string to mt6577
2. Timer DT bindings
- Change compatible string to mt6577
Changes for v4:
1. Clocksource timer
- use cpu_possible_mask
2. Timer DT bindings
- Delete comments about the frequency of the clocks
- Add clock-names for the input clocks
3. Basic SoC support
- add clock-names for the timer
- rename the label of the clocks nodes
Changes for v3:
1. Clocksource timer
- Set cpu_mask_all and irq in clock_event_device
- Use device private structure for driver specific values
2. Timer DT bindings
- Define order of the clock phandles
- Fix typos
3. Basic SoC support
- DTS: set gic to a15-gic
- DTS: order by physical address
- Remove call to dt_init function
Changes for v2:
1. Clocksource timer
- Delete unused parts for sched_clock_source
- Use irq_request instead of setup_irq
- Remove unused SMP parts
- Fix some style issues
- use of_address_to resource and request_mem_region
- delete use of named clock
- select CLKSRC_MMIO in driver Kconfig
2. DT bindings
- delete named clock bindings
3. Basic SoC support
- Clean-up Kconfig
- Add documentation of the SoC compatible property
- DTS: rename SoC file to mt6589.dts
- DTS: Delete not present cache controller
- DTS: Add missing GICv2 properties
- DTS: Change clock names
- DTS: Add Aquaris5 board
4. Add earlyprintk
- patch droped until serial driver is available
5. Add support for Aquaris5 mobile phone
Matthias Brugger (7):
of: Provide function to request and map memory
clocksource: Add support for the Mediatek SoCs
dt-bindings: add mtk-timer bindings
vendor-prefixes: add prefix for Mediatek Inc.
arm: add basic support for Mediatek MT6589 boards
dt-bindings: add documentation for Mediatek SoC
arm: mediatek: add dts for Aquaris5 mobile phone
Documentation/devicetree/bindings/arm/mediatek.txt | 8 +
.../bindings/timer/mediatek,mtk-timer.txt | 17 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/mt6589-aquaris5.dts | 25 ++
arch/arm/boot/dts/mt6589.dtsi | 94 +++++++
arch/arm/mach-mediatek/Kconfig | 6 +
arch/arm/mach-mediatek/Makefile | 1 +
arch/arm/mach-mediatek/mediatek.c | 27 ++
drivers/clocksource/Kconfig | 5 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/mtk_timer.c | 261 ++++++++++++++++++++
drivers/of/address.c | 36 +++
include/linux/io.h | 2 +
include/linux/of_address.h | 11 +
lib/devres.c | 2 -
17 files changed, 498 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek.txt
create mode 100644 Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
create mode 100644 arch/arm/boot/dts/mt6589-aquaris5.dts
create mode 100644 arch/arm/boot/dts/mt6589.dtsi
create mode 100644 arch/arm/mach-mediatek/Kconfig
create mode 100644 arch/arm/mach-mediatek/Makefile
create mode 100644 arch/arm/mach-mediatek/mediatek.c
create mode 100644 drivers/clocksource/mtk_timer.c
--
1.7.9.5
next reply other threads:[~2014-07-07 15:13 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-07 15:13 Matthias Brugger [this message]
2014-07-07 15:13 ` [PATCH v10 1/7] of: Provide function to request and map memory Matthias Brugger
2014-07-16 14:26 ` Rob Herring
2014-07-07 15:13 ` [PATCH v10 2/7] clocksource: Add support for the Mediatek SoCs Matthias Brugger
2014-07-07 15:13 ` [PATCH v10 3/7] dt-bindings: add mtk-timer bindings Matthias Brugger
2014-07-07 15:13 ` [PATCH v10 4/7] vendor-prefixes: add prefix for Mediatek Inc Matthias Brugger
2014-07-07 15:13 ` [PATCH v10 5/7] arm: add basic support for Mediatek MT6589 boards Matthias Brugger
2014-07-18 9:46 ` Daniel Lezcano
2014-07-18 10:47 ` Heiko Stübner
2014-07-18 18:56 ` Daniel Lezcano
2014-07-21 13:14 ` Daniel Lezcano
2014-07-07 15:13 ` [PATCH v10 6/7] dt-bindings: add documentation for Mediatek SoC Matthias Brugger
2014-07-07 15:13 ` [PATCH v10 7/7] arm: mediatek: add dts for Aquaris5 mobile phone Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404745988-32558-1-git-send-email-matthias.bgg@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).