From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] clk: qcom: Fix MN frequency tables, parent map, and jpegd
Date: Tue, 8 Jul 2014 18:19:00 -0700 [thread overview]
Message-ID: <1404868740-10847-1-git-send-email-sboyd@codeaurora.org> (raw)
Clocks that don't have a pre-divider don't list any pre-divider
in their frequency tables, but their tables are initialized using
aggregate initializers. Use tagged initializers so we properly
assign the m and n values for each frequency. Furthermore, the
mmcc_pxo_pll8_pll2_pll3 array improperly mapped the second
element to pll2 instead of pll8, causing the clock driver to
recalculate the wrong rate for any clocks using this array along
with a rate that uses pll2. Finally I noticed that the jpegd
clock improperly indicates that the pre-divider width is only 2,
when it's actually 4 bits wide.
Fixes: 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia
clock controller (MMCC)"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/mmcc-msm8960.c | 80 +++++++++++++++++++++--------------------
1 file changed, 41 insertions(+), 39 deletions(-)
diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c
index 12f3c0b64fcd..de8ee19160f7 100644
--- a/drivers/clk/qcom/mmcc-msm8960.c
+++ b/drivers/clk/qcom/mmcc-msm8960.c
@@ -38,6 +38,8 @@
#define P_PLL2 2
#define P_PLL3 3
+#define F_MN(f, s, _m, _n) { .freq = f, .src = s, .m = _m, .n = _n }
+
static u8 mmcc_pxo_pll8_pll2_map[] = {
[P_PXO] = 0,
[P_PLL8] = 2,
@@ -59,8 +61,8 @@ static u8 mmcc_pxo_pll8_pll2_pll3_map[] = {
static const char *mmcc_pxo_pll8_pll2_pll3[] = {
"pxo",
- "pll2",
"pll8_vote",
+ "pll2",
"pll3",
};
@@ -710,18 +712,18 @@ static struct clk_branch csiphy2_timer_clk = {
};
static struct freq_tbl clk_tbl_gfx2d[] = {
- { 27000000, P_PXO, 1, 0 },
- { 48000000, P_PLL8, 1, 8 },
- { 54857000, P_PLL8, 1, 7 },
- { 64000000, P_PLL8, 1, 6 },
- { 76800000, P_PLL8, 1, 5 },
- { 96000000, P_PLL8, 1, 4 },
- { 128000000, P_PLL8, 1, 3 },
- { 145455000, P_PLL2, 2, 11 },
- { 160000000, P_PLL2, 1, 5 },
- { 177778000, P_PLL2, 2, 9 },
- { 200000000, P_PLL2, 1, 4 },
- { 228571000, P_PLL2, 2, 7 },
+ F_MN( 27000000, P_PXO, 1, 0),
+ F_MN( 48000000, P_PLL8, 1, 8),
+ F_MN( 54857000, P_PLL8, 1, 7),
+ F_MN( 64000000, P_PLL8, 1, 6),
+ F_MN( 76800000, P_PLL8, 1, 5),
+ F_MN( 96000000, P_PLL8, 1, 4),
+ F_MN(128000000, P_PLL8, 1, 3),
+ F_MN(145455000, P_PLL2, 2, 11),
+ F_MN(160000000, P_PLL2, 1, 5),
+ F_MN(177778000, P_PLL2, 2, 9),
+ F_MN(200000000, P_PLL2, 1, 4),
+ F_MN(228571000, P_PLL2, 2, 7),
{ }
};
@@ -842,22 +844,22 @@ static struct clk_branch gfx2d1_clk = {
};
static struct freq_tbl clk_tbl_gfx3d[] = {
- { 27000000, P_PXO, 1, 0 },
- { 48000000, P_PLL8, 1, 8 },
- { 54857000, P_PLL8, 1, 7 },
- { 64000000, P_PLL8, 1, 6 },
- { 76800000, P_PLL8, 1, 5 },
- { 96000000, P_PLL8, 1, 4 },
- { 128000000, P_PLL8, 1, 3 },
- { 145455000, P_PLL2, 2, 11 },
- { 160000000, P_PLL2, 1, 5 },
- { 177778000, P_PLL2, 2, 9 },
- { 200000000, P_PLL2, 1, 4 },
- { 228571000, P_PLL2, 2, 7 },
- { 266667000, P_PLL2, 1, 3 },
- { 300000000, P_PLL3, 1, 4 },
- { 320000000, P_PLL2, 2, 5 },
- { 400000000, P_PLL2, 1, 2 },
+ F_MN( 27000000, P_PXO, 1, 0),
+ F_MN( 48000000, P_PLL8, 1, 8),
+ F_MN( 54857000, P_PLL8, 1, 7),
+ F_MN( 64000000, P_PLL8, 1, 6),
+ F_MN( 76800000, P_PLL8, 1, 5),
+ F_MN( 96000000, P_PLL8, 1, 4),
+ F_MN(128000000, P_PLL8, 1, 3),
+ F_MN(145455000, P_PLL2, 2, 11),
+ F_MN(160000000, P_PLL2, 1, 5),
+ F_MN(177778000, P_PLL2, 2, 9),
+ F_MN(200000000, P_PLL2, 1, 4),
+ F_MN(228571000, P_PLL2, 2, 7),
+ F_MN(266667000, P_PLL2, 1, 3),
+ F_MN(300000000, P_PLL3, 1, 4),
+ F_MN(320000000, P_PLL2, 2, 5),
+ F_MN(400000000, P_PLL2, 1, 2),
{ }
};
@@ -995,7 +997,7 @@ static struct clk_rcg jpegd_src = {
.ns_reg = 0x00ac,
.p = {
.pre_div_shift = 12,
- .pre_div_width = 2,
+ .pre_div_width = 4,
},
.s = {
.src_sel_shift = 0,
@@ -1342,15 +1344,15 @@ static struct clk_branch hdmi_app_clk = {
};
static struct freq_tbl clk_tbl_vcodec[] = {
- { 27000000, P_PXO, 1, 0 },
- { 32000000, P_PLL8, 1, 12 },
- { 48000000, P_PLL8, 1, 8 },
- { 54860000, P_PLL8, 1, 7 },
- { 96000000, P_PLL8, 1, 4 },
- { 133330000, P_PLL2, 1, 6 },
- { 200000000, P_PLL2, 1, 4 },
- { 228570000, P_PLL2, 2, 7 },
- { 266670000, P_PLL2, 1, 3 },
+ F_MN( 27000000, P_PXO, 1, 0),
+ F_MN( 32000000, P_PLL8, 1, 12),
+ F_MN( 48000000, P_PLL8, 1, 8),
+ F_MN( 54860000, P_PLL8, 1, 7),
+ F_MN( 96000000, P_PLL8, 1, 4),
+ F_MN(133330000, P_PLL2, 1, 6),
+ F_MN(200000000, P_PLL2, 1, 4),
+ F_MN(228570000, P_PLL2, 2, 7),
+ F_MN(266670000, P_PLL2, 1, 3),
{ }
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
reply other threads:[~2014-07-09 1:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404868740-10847-1-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).