From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@freescale.com (Shawn Guo) Date: Wed, 9 Jul 2014 13:40:26 +0800 Subject: [PATCH] ARM: dts: imx53: correct clock-names of SATA node Message-ID: <1404884426-28957-1-git-send-email-shawn.guo@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Per the binding doc imx-sata.txt, the first entry of clock-names should be "sata" than anything else. Correct it for imx53 SATA node. It works for now only because SATA driver gets clock by index so far. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 5fe8509cc4b6..64fa27b36be0 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -108,7 +108,7 @@ clocks = <&clks IMX5_CLK_SATA_GATE>, <&clks IMX5_CLK_SATA_REF>, <&clks IMX5_CLK_AHB>; - clock-names = "sata_gate", "sata_ref", "ahb"; + clock-names = "sata", "sata_ref", "ahb"; status = "disabled"; }; -- 1.8.3.2