[PATCH 0/2] Support apq8064 global clock control

[PATCH 0/2] Support apq8064 global clock control

[Stephen Boyd]

These two patches add full support for apq8064 in the global clock
controller driver. The first patch has already been on the list so
I've picked it up and resent because the second patch depends on it.

Srinivas Kandagatla (1):
  clk: qcom: add clocks necessary for apq8064 sdcc

Stephen Boyd (1):
  clk: qcom: Fully support apq8064 global clock control

 drivers/clk/qcom/gcc-msm8960.c               | 583 ++++++++++++++++++++++++++-
 include/dt-bindings/clock/qcom,gcc-msm8960.h |  11 +
 include/dt-bindings/reset/qcom,gcc-msm8960.h |  16 +
 3 files changed, 607 insertions(+), 3 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH 1/2] clk: qcom: add clocks necessary for apq8064 sdcc

[Stephen Boyd]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

This patch adds clocks necessary for SD card controller on apq8064 SOC.
Without this patch the clocks are visible to the sdcc driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/gcc-msm8960.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index f4ffd91901f8..c47a75829b2b 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -2876,6 +2876,14 @@ static struct clk_regmap *gcc_apq8064_clks[] = {
 	[GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr,
 	[GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr,
 	[GSBI7_H_CLK] = &gsbi7_h_clk.clkr,
+	[SDC1_SRC] = &sdc1_src.clkr,
+	[SDC1_CLK] = &sdc1_clk.clkr,
+	[SDC2_SRC] = &sdc2_src.clkr,
+	[SDC2_CLK] = &sdc2_clk.clkr,
+	[SDC3_SRC] = &sdc3_src.clkr,
+	[SDC3_CLK] = &sdc3_clk.clkr,
+	[SDC4_SRC] = &sdc4_src.clkr,
+	[SDC4_CLK] = &sdc4_clk.clkr,
 };
 
 static const struct regmap_config gcc_msm8960_regmap_config = {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH 1/2] clk: qcom: add clocks necessary for apq8064 sdcc

[Andreas Färber]

Am 10.06.2014 22:58, schrieb Stephen Boyd:
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> 
> This patch adds clocks necessary for SD card controller on apq8064 SOC.
> Without this patch the clocks are visible to the sdcc driver.

Was this maybe meant to read "invisible"?

Regards,
Andreas

> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Reviewed-by: Kumar Gala <galak@codeaurora.org>
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
>  drivers/clk/qcom/gcc-msm8960.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
> index f4ffd91901f8..c47a75829b2b 100644
> --- a/drivers/clk/qcom/gcc-msm8960.c
> +++ b/drivers/clk/qcom/gcc-msm8960.c
> @@ -2876,6 +2876,14 @@ static struct clk_regmap *gcc_apq8064_clks[] = {
>  	[GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr,
>  	[GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr,
>  	[GSBI7_H_CLK] = &gsbi7_h_clk.clkr,
> +	[SDC1_SRC] = &sdc1_src.clkr,
> +	[SDC1_CLK] = &sdc1_clk.clkr,
> +	[SDC2_SRC] = &sdc2_src.clkr,
> +	[SDC2_CLK] = &sdc2_clk.clkr,
> +	[SDC3_SRC] = &sdc3_src.clkr,
> +	[SDC3_CLK] = &sdc3_clk.clkr,
> +	[SDC4_SRC] = &sdc4_src.clkr,
> +	[SDC4_CLK] = &sdc4_clk.clkr,
>  };
>  
>  static const struct regmap_config gcc_msm8960_regmap_config = {
> 


-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg

[PATCH 1/2] clk: qcom: add clocks necessary for apq8064 sdcc

[Srinivas Kandagatla]

On 11/06/14 10:14, Andreas F?rber wrote:
>> This patch adds clocks necessary for SD card controller on apq8064 SOC.
>> >Without this patch the clocks are visible to the sdcc driver.
> Was this maybe meant to read "invisible"?

You are correct it was suposed to be not visible, will fix it.

>
> Regards,
> Andreas
>

[PATCH 2/2] clk: qcom: Fully support apq8064 global clock control

[Stephen Boyd]

Add in the handful of new clocks and introduce a new reset table
with the few new resets.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/gcc-msm8960.c               | 577 ++++++++++++++++++++++++++-
 include/dt-bindings/clock/qcom,gcc-msm8960.h |  11 +
 include/dt-bindings/reset/qcom,gcc-msm8960.h |  16 +
 3 files changed, 600 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index c47a75829b2b..007534f7a2d7 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -104,6 +104,7 @@ static struct clk_regmap pll14_vote = {
 
 #define P_PXO	0
 #define P_PLL8	1
+#define P_PLL3	2
 #define P_CXO	2
 
 static const u8 gcc_pxo_pll8_map[] = {
@@ -128,6 +129,18 @@ static const char *gcc_pxo_pll8_cxo[] = {
 	"cxo",
 };
 
+static const u8 gcc_pxo_pll8_pll3_map[] = {
+	[P_PXO]		= 0,
+	[P_PLL8]	= 3,
+	[P_PLL3]	= 6,
+};
+
+static const char *gcc_pxo_pll8_pll3[] = {
+	"pxo",
+	"pll8_vote",
+	"pll3",
+};
+
 static struct freq_tbl clk_tbl_gsbi_uart[] = {
 	{  1843200, P_PLL8, 2,  6, 625 },
 	{  3686400, P_PLL8, 2, 12, 625 },
@@ -1928,6 +1941,104 @@ static struct clk_branch usb_hs1_xcvr_clk = {
 	},
 };
 
+static struct clk_rcg usb_hs3_xcvr_src = {
+	.ns_reg = 0x370c,
+	.md_reg = 0x3708,
+	.mn = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.p = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.s = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_map,
+	},
+	.freq_tbl = clk_tbl_usb,
+	.clkr = {
+		.enable_reg = 0x370c,
+		.enable_mask = BIT(11),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs3_xcvr_src",
+			.parent_names = gcc_pxo_pll8,
+			.num_parents = 2,
+			.ops = &clk_rcg_ops,
+			.flags = CLK_SET_RATE_GATE,
+		},
+	}
+};
+
+static struct clk_branch usb_hs3_xcvr_clk = {
+	.halt_reg = 0x2fc8,
+	.halt_bit = 30,
+	.clkr = {
+		.enable_reg = 0x370c,
+		.enable_mask = BIT(9),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs3_xcvr_clk",
+			.parent_names = (const char *[]){ "usb_hs3_xcvr_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_rcg usb_hs4_xcvr_src = {
+	.ns_reg = 0x372c,
+	.md_reg = 0x3728,
+	.mn = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.p = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.s = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_map,
+	},
+	.freq_tbl = clk_tbl_usb,
+	.clkr = {
+		.enable_reg = 0x372c,
+		.enable_mask = BIT(11),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs4_xcvr_src",
+			.parent_names = gcc_pxo_pll8,
+			.num_parents = 2,
+			.ops = &clk_rcg_ops,
+			.flags = CLK_SET_RATE_GATE,
+		},
+	}
+};
+
+static struct clk_branch usb_hs4_xcvr_clk = {
+	.halt_reg = 0x2fc8,
+	.halt_bit = 2,
+	.clkr = {
+		.enable_reg = 0x372c,
+		.enable_mask = BIT(9),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs4_xcvr_clk",
+			.parent_names = (const char *[]){ "usb_hs4_xcvr_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_rcg usb_hsic_xcvr_fs_src = {
 	.ns_reg = 0x2928,
 	.md_reg = 0x2924,
@@ -2456,6 +2567,34 @@ static struct clk_branch usb_hs1_h_clk = {
 	},
 };
 
+static struct clk_branch usb_hs3_h_clk = {
+	.halt_reg = 0x2fc8,
+	.halt_bit = 31,
+	.clkr = {
+		.enable_reg = 0x3700,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs3_h_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch usb_hs4_h_clk = {
+	.halt_reg = 0x2fc8,
+	.halt_bit = 7,
+	.clkr = {
+		.enable_reg = 0x3720,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs4_h_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
 static struct clk_branch usb_hsic_h_clk = {
 	.halt_reg = 0x2fcc,
 	.halt_bit = 28,
@@ -2582,6 +2721,244 @@ static struct clk_branch adm0_pbus_clk = {
 	},
 };
 
+static struct freq_tbl clk_tbl_ce3[] = {
+	{ 48000000, P_PLL8, 8 },
+	{ 100000000, P_PLL3, 12 },
+	{ 120000000, P_PLL3, 10 },
+	{ }
+};
+
+static struct clk_rcg ce3_src = {
+	.ns_reg = 0x36c0,
+	.p = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.s = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll3_map,
+	},
+	.freq_tbl = clk_tbl_ce3,
+	.clkr = {
+		.enable_reg = 0x2c08,
+		.enable_mask = BIT(7),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce3_src",
+			.parent_names = gcc_pxo_pll8_pll3,
+			.num_parents = 3,
+			.ops = &clk_rcg_ops,
+			.flags = CLK_SET_RATE_GATE,
+		},
+	},
+};
+
+static struct clk_branch ce3_core_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 5,
+	.clkr = {
+		.enable_reg = 0x36c4,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce3_core_clk",
+			.parent_names = (const char *[]){ "ce3_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_branch ce3_h_clk = {
+	.halt_reg = 0x2fc4,
+	.halt_bit = 16,
+	.clkr = {
+		.enable_reg = 0x36c4,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce3_h_clk",
+			.parent_names = (const char *[]){ "ce3_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static const struct freq_tbl clk_tbl_sata_ref[] = {
+	{ 48000000, P_PLL8, 8, 0, 0 },
+	{ 100000000, P_PLL3, 12, 0, 0 },
+	{ }
+};
+
+static struct clk_rcg sata_clk_src = {
+	.ns_reg = 0x2c08,
+	.p = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.s = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll3_map,
+	},
+	.freq_tbl = clk_tbl_sata_ref,
+	.clkr = {
+		.enable_reg = 0x2c08,
+		.enable_mask = BIT(7),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_clk_src",
+			.parent_names = gcc_pxo_pll8_pll3,
+			.num_parents = 3,
+			.ops = &clk_rcg_ops,
+			.flags = CLK_SET_RATE_GATE,
+		},
+	},
+};
+
+static struct clk_branch sata_rxoob_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 26,
+	.clkr = {
+		.enable_reg = 0x2c0c,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_rxoob_clk",
+			.parent_names = (const char *[]){ "sata_clk_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_branch sata_pmalive_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 25,
+	.clkr = {
+		.enable_reg = 0x2c10,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_pmalive_clk",
+			.parent_names = (const char *[]){ "sata_clk_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_branch sata_phy_ref_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 24,
+	.clkr = {
+		.enable_reg = 0x2c14,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_phy_ref_clk",
+			.parent_names = (const char *[]){ "pxo" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+		},
+	},
+};
+
+static struct clk_branch sata_a_clk = {
+	.halt_reg = 0x2fc0,
+	.halt_bit = 12,
+	.clkr = {
+		.enable_reg = 0x2c20,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_a_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch sata_h_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 27,
+	.clkr = {
+		.enable_reg = 0x2c00,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_h_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch sfab_sata_s_h_clk = {
+	.halt_reg = 0x2fc4,
+	.halt_bit = 14,
+	.clkr = {
+		.enable_reg = 0x2480,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sfab_sata_s_h_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch sata_phy_cfg_clk = {
+	.halt_reg = 0x2fcc,
+	.halt_bit = 12,
+	.clkr = {
+		.enable_reg = 0x2c40,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_phy_cfg_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch pcie_phy_ref_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 29,
+	.clkr = {
+		.enable_reg = 0x22d0,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "pcie_phy_ref_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch pcie_h_clk = {
+	.halt_reg = 0x2fd4,
+	.halt_bit = 8,
+	.clkr = {
+		.enable_reg = 0x22cc,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "pcie_h_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch pcie_a_clk = {
+	.halt_reg = 0x2fc0,
+	.halt_bit = 13,
+	.clkr = {
+		.enable_reg = 0x22c0,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "pcie_a_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
 static struct clk_branch pmic_arb0_h_clk = {
 	.halt_reg = 0x2fd8,
 	.halt_check = BRANCH_HALT_VOTED,
@@ -2869,13 +3246,48 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
 };
 
 static struct clk_regmap *gcc_apq8064_clks[] = {
+	[PLL3] = &pll3.clkr,
 	[PLL8] = &pll8.clkr,
 	[PLL8_VOTE] = &pll8_vote,
+	[PLL14] = &pll14.clkr,
+	[PLL14_VOTE] = &pll14_vote,
+	[GSBI1_UART_SRC] = &gsbi1_uart_src.clkr,
+	[GSBI1_UART_CLK] = &gsbi1_uart_clk.clkr,
+	[GSBI2_UART_SRC] = &gsbi2_uart_src.clkr,
+	[GSBI2_UART_CLK] = &gsbi2_uart_clk.clkr,
+	[GSBI3_UART_SRC] = &gsbi3_uart_src.clkr,
+	[GSBI3_UART_CLK] = &gsbi3_uart_clk.clkr,
+	[GSBI4_UART_SRC] = &gsbi4_uart_src.clkr,
+	[GSBI4_UART_CLK] = &gsbi4_uart_clk.clkr,
+	[GSBI5_UART_SRC] = &gsbi5_uart_src.clkr,
+	[GSBI5_UART_CLK] = &gsbi5_uart_clk.clkr,
+	[GSBI6_UART_SRC] = &gsbi6_uart_src.clkr,
+	[GSBI6_UART_CLK] = &gsbi6_uart_clk.clkr,
 	[GSBI7_UART_SRC] = &gsbi7_uart_src.clkr,
 	[GSBI7_UART_CLK] = &gsbi7_uart_clk.clkr,
+	[GSBI1_QUP_SRC] = &gsbi1_qup_src.clkr,
+	[GSBI1_QUP_CLK] = &gsbi1_qup_clk.clkr,
+	[GSBI2_QUP_SRC] = &gsbi2_qup_src.clkr,
+	[GSBI2_QUP_CLK] = &gsbi2_qup_clk.clkr,
+	[GSBI3_QUP_SRC] = &gsbi3_qup_src.clkr,
+	[GSBI3_QUP_CLK] = &gsbi3_qup_clk.clkr,
+	[GSBI4_QUP_SRC] = &gsbi4_qup_src.clkr,
+	[GSBI4_QUP_CLK] = &gsbi4_qup_clk.clkr,
+	[GSBI5_QUP_SRC] = &gsbi5_qup_src.clkr,
+	[GSBI5_QUP_CLK] = &gsbi5_qup_clk.clkr,
+	[GSBI6_QUP_SRC] = &gsbi6_qup_src.clkr,
+	[GSBI6_QUP_CLK] = &gsbi6_qup_clk.clkr,
 	[GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr,
 	[GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr,
-	[GSBI7_H_CLK] = &gsbi7_h_clk.clkr,
+	[GP0_SRC] = &gp0_src.clkr,
+	[GP0_CLK] = &gp0_clk.clkr,
+	[GP1_SRC] = &gp1_src.clkr,
+	[GP1_CLK] = &gp1_clk.clkr,
+	[GP2_SRC] = &gp2_src.clkr,
+	[GP2_CLK] = &gp2_clk.clkr,
+	[PMEM_A_CLK] = &pmem_clk.clkr,
+	[PRNG_SRC] = &prng_src.clkr,
+	[PRNG_CLK] = &prng_clk.clkr,
 	[SDC1_SRC] = &sdc1_src.clkr,
 	[SDC1_CLK] = &sdc1_clk.clkr,
 	[SDC2_SRC] = &sdc2_src.clkr,
@@ -2884,6 +3296,155 @@ static struct clk_regmap *gcc_apq8064_clks[] = {
 	[SDC3_CLK] = &sdc3_clk.clkr,
 	[SDC4_SRC] = &sdc4_src.clkr,
 	[SDC4_CLK] = &sdc4_clk.clkr,
+	[TSIF_REF_SRC] = &tsif_ref_src.clkr,
+	[TSIF_REF_CLK] = &tsif_ref_clk.clkr,
+	[USB_HS1_XCVR_SRC] = &usb_hs1_xcvr_src.clkr,
+	[USB_HS1_XCVR_CLK] = &usb_hs1_xcvr_clk.clkr,
+	[USB_HS3_XCVR_SRC] = &usb_hs3_xcvr_src.clkr,
+	[USB_HS3_XCVR_CLK] = &usb_hs3_xcvr_clk.clkr,
+	[USB_HS4_XCVR_SRC] = &usb_hs4_xcvr_src.clkr,
+	[USB_HS4_XCVR_CLK] = &usb_hs4_xcvr_clk.clkr,
+	[USB_HSIC_XCVR_FS_SRC] = &usb_hsic_xcvr_fs_src.clkr,
+	[USB_HSIC_XCVR_FS_CLK] = &usb_hsic_xcvr_fs_clk.clkr,
+	[USB_HSIC_SYSTEM_CLK] = &usb_hsic_system_clk.clkr,
+	[USB_HSIC_HSIC_CLK] = &usb_hsic_hsic_clk.clkr,
+	[USB_HSIC_HSIO_CAL_CLK] = &usb_hsic_hsio_cal_clk.clkr,
+	[USB_FS1_XCVR_FS_SRC] = &usb_fs1_xcvr_fs_src.clkr,
+	[USB_FS1_XCVR_FS_CLK] = &usb_fs1_xcvr_fs_clk.clkr,
+	[USB_FS1_SYSTEM_CLK] = &usb_fs1_system_clk.clkr,
+	[SATA_H_CLK] = &sata_h_clk.clkr,
+	[SATA_CLK_SRC] = &sata_clk_src.clkr,
+	[SATA_RXOOB_CLK] = &sata_rxoob_clk.clkr,
+	[SATA_PMALIVE_CLK] = &sata_pmalive_clk.clkr,
+	[SATA_PHY_REF_CLK] = &sata_phy_ref_clk.clkr,
+	[SATA_PHY_CFG_CLK] = &sata_phy_cfg_clk.clkr,
+	[SATA_A_CLK] = &sata_a_clk.clkr,
+	[SFAB_SATA_S_H_CLK] = &sfab_sata_s_h_clk.clkr,
+	[CE3_SRC] = &ce3_src.clkr,
+	[CE3_CORE_CLK] = &ce3_core_clk.clkr,
+	[CE3_H_CLK] = &ce3_h_clk.clkr,
+	[DMA_BAM_H_CLK] = &dma_bam_h_clk.clkr,
+	[GSBI1_H_CLK] = &gsbi1_h_clk.clkr,
+	[GSBI2_H_CLK] = &gsbi2_h_clk.clkr,
+	[GSBI3_H_CLK] = &gsbi3_h_clk.clkr,
+	[GSBI4_H_CLK] = &gsbi4_h_clk.clkr,
+	[GSBI5_H_CLK] = &gsbi5_h_clk.clkr,
+	[GSBI6_H_CLK] = &gsbi6_h_clk.clkr,
+	[GSBI7_H_CLK] = &gsbi7_h_clk.clkr,
+	[TSIF_H_CLK] = &tsif_h_clk.clkr,
+	[USB_FS1_H_CLK] = &usb_fs1_h_clk.clkr,
+	[USB_HS1_H_CLK] = &usb_hs1_h_clk.clkr,
+	[USB_HSIC_H_CLK] = &usb_hsic_h_clk.clkr,
+	[USB_HS3_H_CLK] = &usb_hs3_h_clk.clkr,
+	[USB_HS4_H_CLK] = &usb_hs4_h_clk.clkr,
+	[SDC1_H_CLK] = &sdc1_h_clk.clkr,
+	[SDC2_H_CLK] = &sdc2_h_clk.clkr,
+	[SDC3_H_CLK] = &sdc3_h_clk.clkr,
+	[SDC4_H_CLK] = &sdc4_h_clk.clkr,
+	[ADM0_CLK] = &adm0_clk.clkr,
+	[ADM0_PBUS_CLK] = &adm0_pbus_clk.clkr,
+	[PCIE_A_CLK] = &pcie_a_clk.clkr,
+	[PCIE_PHY_REF_CLK] = &pcie_phy_ref_clk.clkr,
+	[PCIE_H_CLK] = &pcie_h_clk.clkr,
+	[PMIC_ARB0_H_CLK] = &pmic_arb0_h_clk.clkr,
+	[PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr,
+	[PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr,
+	[RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr,
+};
+
+static const struct qcom_reset_map gcc_apq8064_resets[] = {
+	[QDSS_STM_RESET] = { 0x2060, 6 },
+	[AFAB_SMPSS_S_RESET] = { 0x20b8, 2 },
+	[AFAB_SMPSS_M1_RESET] = { 0x20b8, 1 },
+	[AFAB_SMPSS_M0_RESET] = { 0x20b8 },
+	[AFAB_EBI1_CH0_RESET] = { 0x20c0, 7 },
+	[AFAB_EBI1_CH1_RESET] = { 0x20c4, 7},
+	[SFAB_ADM0_M0_RESET] = { 0x21e0, 7 },
+	[SFAB_ADM0_M1_RESET] = { 0x21e4, 7 },
+	[SFAB_ADM0_M2_RESET] = { 0x21e8, 7 },
+	[ADM0_C2_RESET] = { 0x220c, 4},
+	[ADM0_C1_RESET] = { 0x220c, 3},
+	[ADM0_C0_RESET] = { 0x220c, 2},
+	[ADM0_PBUS_RESET] = { 0x220c, 1 },
+	[ADM0_RESET] = { 0x220c },
+	[QDSS_CLKS_SW_RESET] = { 0x2260, 5 },
+	[QDSS_POR_RESET] = { 0x2260, 4 },
+	[QDSS_TSCTR_RESET] = { 0x2260, 3 },
+	[QDSS_HRESET_RESET] = { 0x2260, 2 },
+	[QDSS_AXI_RESET] = { 0x2260, 1 },
+	[QDSS_DBG_RESET] = { 0x2260 },
+	[SFAB_PCIE_M_RESET] = { 0x22d8, 1 },
+	[SFAB_PCIE_S_RESET] = { 0x22d8 },
+	[PCIE_EXT_PCI_RESET] = { 0x22dc, 6 },
+	[PCIE_PHY_RESET] = { 0x22dc, 5 },
+	[PCIE_PCI_RESET] = { 0x22dc, 4 },
+	[PCIE_POR_RESET] = { 0x22dc, 3 },
+	[PCIE_HCLK_RESET] = { 0x22dc, 2 },
+	[PCIE_ACLK_RESET] = { 0x22dc },
+	[SFAB_USB3_M_RESET] = { 0x2360, 7 },
+	[SFAB_RIVA_M_RESET] = { 0x2380, 7 },
+	[SFAB_LPASS_RESET] = { 0x23a0, 7 },
+	[SFAB_AFAB_M_RESET] = { 0x23e0, 7 },
+	[AFAB_SFAB_M0_RESET] = { 0x2420, 7 },
+	[AFAB_SFAB_M1_RESET] = { 0x2424, 7 },
+	[SFAB_SATA_S_RESET] = { 0x2480, 7 },
+	[SFAB_DFAB_M_RESET] = { 0x2500, 7 },
+	[DFAB_SFAB_M_RESET] = { 0x2520, 7 },
+	[DFAB_SWAY0_RESET] = { 0x2540, 7 },
+	[DFAB_SWAY1_RESET] = { 0x2544, 7 },
+	[DFAB_ARB0_RESET] = { 0x2560, 7 },
+	[DFAB_ARB1_RESET] = { 0x2564, 7 },
+	[PPSS_PROC_RESET] = { 0x2594, 1 },
+	[PPSS_RESET] = { 0x2594},
+	[DMA_BAM_RESET] = { 0x25c0, 7 },
+	[SPS_TIC_H_RESET] = { 0x2600, 7 },
+	[SFAB_CFPB_M_RESET] = { 0x2680, 7 },
+	[SFAB_CFPB_S_RESET] = { 0x26c0, 7 },
+	[TSIF_H_RESET] = { 0x2700, 7 },
+	[CE1_H_RESET] = { 0x2720, 7 },
+	[CE1_CORE_RESET] = { 0x2724, 7 },
+	[CE1_SLEEP_RESET] = { 0x2728, 7 },
+	[CE2_H_RESET] = { 0x2740, 7 },
+	[CE2_CORE_RESET] = { 0x2744, 7 },
+	[SFAB_SFPB_M_RESET] = { 0x2780, 7 },
+	[SFAB_SFPB_S_RESET] = { 0x27a0, 7 },
+	[RPM_PROC_RESET] = { 0x27c0, 7 },
+	[PMIC_SSBI2_RESET] = { 0x280c, 12 },
+	[SDC1_RESET] = { 0x2830 },
+	[SDC2_RESET] = { 0x2850 },
+	[SDC3_RESET] = { 0x2870 },
+	[SDC4_RESET] = { 0x2890 },
+	[USB_HS1_RESET] = { 0x2910 },
+	[USB_HSIC_RESET] = { 0x2934 },
+	[USB_FS1_XCVR_RESET] = { 0x2974, 1 },
+	[USB_FS1_RESET] = { 0x2974 },
+	[GSBI1_RESET] = { 0x29dc },
+	[GSBI2_RESET] = { 0x29fc },
+	[GSBI3_RESET] = { 0x2a1c },
+	[GSBI4_RESET] = { 0x2a3c },
+	[GSBI5_RESET] = { 0x2a5c },
+	[GSBI6_RESET] = { 0x2a7c },
+	[GSBI7_RESET] = { 0x2a9c },
+	[SPDM_RESET] = { 0x2b6c },
+	[TLMM_H_RESET] = { 0x2ba0, 7 },
+	[SATA_SFAB_M_RESET] = { 0x2c18 },
+	[SATA_RESET] = { 0x2c1c },
+	[GSS_SLP_RESET] = { 0x2c60, 7 },
+	[GSS_RESET] = { 0x2c64 },
+	[TSSC_RESET] = { 0x2ca0, 7 },
+	[PDM_RESET] = { 0x2cc0, 12 },
+	[MPM_H_RESET] = { 0x2da0, 7 },
+	[MPM_RESET] = { 0x2da4 },
+	[SFAB_SMPSS_S_RESET] = { 0x2e00, 7 },
+	[PRNG_RESET] = { 0x2e80, 12 },
+	[RIVA_RESET] = { 0x35e0 },
+	[CE3_H_RESET] = { 0x36c4, 7 },
+	[SFAB_CE3_M_RESET] = { 0x36c8, 1 },
+	[SFAB_CE3_S_RESET] = { 0x36c8 },
+	[CE3_RESET] = { 0x36cc, 7 },
+	[CE3_SLEEP_RESET] = { 0x36d0, 7 },
+	[USB_HS3_RESET] = { 0x3710 },
+	[USB_HS4_RESET] = { 0x3730 },
 };
 
 static const struct regmap_config gcc_msm8960_regmap_config = {
@@ -2894,6 +3455,14 @@ static const struct regmap_config gcc_msm8960_regmap_config = {
 	.fast_io	= true,
 };
 
+static const struct regmap_config gcc_apq8064_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= 0x3880,
+	.fast_io	= true,
+};
+
 static const struct qcom_cc_desc gcc_msm8960_desc = {
 	.config = &gcc_msm8960_regmap_config,
 	.clks = gcc_msm8960_clks,
@@ -2903,11 +3472,11 @@ static const struct qcom_cc_desc gcc_msm8960_desc = {
 };
 
 static const struct qcom_cc_desc gcc_apq8064_desc = {
-	.config = &gcc_msm8960_regmap_config,
+	.config = &gcc_apq8064_regmap_config,
 	.clks = gcc_apq8064_clks,
 	.num_clks = ARRAY_SIZE(gcc_apq8064_clks),
-	.resets = gcc_msm8960_resets,
-	.num_resets = ARRAY_SIZE(gcc_msm8960_resets),
+	.resets = gcc_apq8064_resets,
+	.num_resets = ARRAY_SIZE(gcc_apq8064_resets),
 };
 
 static const struct of_device_id gcc_msm8960_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8960.h b/include/dt-bindings/clock/qcom,gcc-msm8960.h
index f9f547146a15..7d20eedfee98 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8960.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8960.h
@@ -308,5 +308,16 @@
 #define PLL13					292
 #define PLL14					293
 #define PLL14_VOTE				294
+#define USB_HS3_H_CLK				295
+#define USB_HS3_XCVR_SRC			296
+#define USB_HS3_XCVR_CLK			297
+#define USB_HS4_H_CLK				298
+#define USB_HS4_XCVR_SRC			299
+#define USB_HS4_XCVR_CLK			300
+#define SATA_PHY_CFG_CLK			301
+#define SATA_A_CLK				302
+#define CE3_SRC					303
+#define CE3_CORE_CLK				304
+#define CE3_H_CLK				305
 
 #endif
diff --git a/include/dt-bindings/reset/qcom,gcc-msm8960.h b/include/dt-bindings/reset/qcom,gcc-msm8960.h
index 07edd0e65eed..47c8686955da 100644
--- a/include/dt-bindings/reset/qcom,gcc-msm8960.h
+++ b/include/dt-bindings/reset/qcom,gcc-msm8960.h
@@ -114,5 +114,21 @@
 #define SFAB_SMPSS_S_RESET				97
 #define PRNG_RESET					98
 #define RIVA_RESET					99
+#define USB_HS3_RESET					100
+#define USB_HS4_RESET					101
+#define CE3_RESET					102
+#define PCIE_EXT_PCI_RESET				103
+#define PCIE_PHY_RESET					104
+#define PCIE_PCI_RESET					105
+#define PCIE_POR_RESET					106
+#define PCIE_HCLK_RESET					107
+#define PCIE_ACLK_RESET					108
+#define CE3_H_RESET					109
+#define SFAB_CE3_M_RESET				110
+#define SFAB_CE3_S_RESET				111
+#define SATA_RESET					112
+#define CE3_SLEEP_RESET					113
+#define GSS_SLP_RESET					114
+#define GSS_RESET					115
 
 #endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

[PATCH v2 0/2] Support apq8064 global clock control

[Srinivas Kandagatla]

These two patches add full support for apq8064 in the global clock
controller driver. The first patch has already been on the list so
I've picked it up and resent because the second patch depends on it.

Am resending the series with the fix to my patch.

Changes since v1:
	- fixed comment log spotted by Andreas.
	- added few more sdcc clocks.

Srinivas Kandagatla (1):
  clk: qcom: add clocks necessary for apq8064 sdcc

Stephen Boyd (1):
  clk: qcom: Fully support apq8064 global clock control

 drivers/clk/qcom/gcc-msm8960.c               | 583 ++++++++++++++++++++++++++-
 include/dt-bindings/clock/qcom,gcc-msm8960.h |  11 +
 include/dt-bindings/reset/qcom,gcc-msm8960.h |  16 +
 3 files changed, 607 insertions(+), 3 deletions(-)

-- 
1.9.1

[PATCH v2 1/2] clk: qcom: add clocks necessary for apq8064 sdcc

[Srinivas Kandagatla]

This patch adds clocks necessary for SD card controller on apq8064 SOC.
Without this patch the clocks are not visible to the sdcc driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Kumar Gala <galak@codeaurora.org>
---
 drivers/clk/qcom/gcc-msm8960.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index f4ffd91..4cb2927 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -2876,6 +2876,18 @@ static struct clk_regmap *gcc_apq8064_clks[] = {
 	[GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr,
 	[GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr,
 	[GSBI7_H_CLK] = &gsbi7_h_clk.clkr,
+	[SDC1_SRC] = &sdc1_src.clkr,
+	[SDC1_CLK] = &sdc1_clk.clkr,
+	[SDC2_SRC] = &sdc2_src.clkr,
+	[SDC2_CLK] = &sdc2_clk.clkr,
+	[SDC3_SRC] = &sdc3_src.clkr,
+	[SDC3_CLK] = &sdc3_clk.clkr,
+	[SDC4_SRC] = &sdc4_src.clkr,
+	[SDC4_CLK] = &sdc4_clk.clkr,
+	[SDC1_H_CLK] = &sdc1_h_clk.clkr,
+	[SDC2_H_CLK] = &sdc2_h_clk.clkr,
+	[SDC3_H_CLK] = &sdc3_h_clk.clkr,
+	[SDC4_H_CLK] = &sdc4_h_clk.clkr,
 };
 
 static const struct regmap_config gcc_msm8960_regmap_config = {
-- 
1.9.1

[PATCH v2 2/2] clk: qcom: Fully support apq8064 global clock control

[Srinivas Kandagatla]

From: Stephen Boyd <sboyd@codeaurora.org>

Add in the handful of new clocks and introduce a new reset table
with the few new resets.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/gcc-msm8960.c               | 573 ++++++++++++++++++++++++++-
 include/dt-bindings/clock/qcom,gcc-msm8960.h |  11 +
 include/dt-bindings/reset/qcom,gcc-msm8960.h |  16 +
 3 files changed, 596 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index 4cb2927..007534f 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -104,6 +104,7 @@ static struct clk_regmap pll14_vote = {
 
 #define P_PXO	0
 #define P_PLL8	1
+#define P_PLL3	2
 #define P_CXO	2
 
 static const u8 gcc_pxo_pll8_map[] = {
@@ -128,6 +129,18 @@ static const char *gcc_pxo_pll8_cxo[] = {
 	"cxo",
 };
 
+static const u8 gcc_pxo_pll8_pll3_map[] = {
+	[P_PXO]		= 0,
+	[P_PLL8]	= 3,
+	[P_PLL3]	= 6,
+};
+
+static const char *gcc_pxo_pll8_pll3[] = {
+	"pxo",
+	"pll8_vote",
+	"pll3",
+};
+
 static struct freq_tbl clk_tbl_gsbi_uart[] = {
 	{  1843200, P_PLL8, 2,  6, 625 },
 	{  3686400, P_PLL8, 2, 12, 625 },
@@ -1928,6 +1941,104 @@ static struct clk_branch usb_hs1_xcvr_clk = {
 	},
 };
 
+static struct clk_rcg usb_hs3_xcvr_src = {
+	.ns_reg = 0x370c,
+	.md_reg = 0x3708,
+	.mn = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.p = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.s = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_map,
+	},
+	.freq_tbl = clk_tbl_usb,
+	.clkr = {
+		.enable_reg = 0x370c,
+		.enable_mask = BIT(11),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs3_xcvr_src",
+			.parent_names = gcc_pxo_pll8,
+			.num_parents = 2,
+			.ops = &clk_rcg_ops,
+			.flags = CLK_SET_RATE_GATE,
+		},
+	}
+};
+
+static struct clk_branch usb_hs3_xcvr_clk = {
+	.halt_reg = 0x2fc8,
+	.halt_bit = 30,
+	.clkr = {
+		.enable_reg = 0x370c,
+		.enable_mask = BIT(9),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs3_xcvr_clk",
+			.parent_names = (const char *[]){ "usb_hs3_xcvr_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_rcg usb_hs4_xcvr_src = {
+	.ns_reg = 0x372c,
+	.md_reg = 0x3728,
+	.mn = {
+		.mnctr_en_bit = 8,
+		.mnctr_reset_bit = 7,
+		.mnctr_mode_shift = 5,
+		.n_val_shift = 16,
+		.m_val_shift = 16,
+		.width = 8,
+	},
+	.p = {
+		.pre_div_shift = 3,
+		.pre_div_width = 2,
+	},
+	.s = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_map,
+	},
+	.freq_tbl = clk_tbl_usb,
+	.clkr = {
+		.enable_reg = 0x372c,
+		.enable_mask = BIT(11),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs4_xcvr_src",
+			.parent_names = gcc_pxo_pll8,
+			.num_parents = 2,
+			.ops = &clk_rcg_ops,
+			.flags = CLK_SET_RATE_GATE,
+		},
+	}
+};
+
+static struct clk_branch usb_hs4_xcvr_clk = {
+	.halt_reg = 0x2fc8,
+	.halt_bit = 2,
+	.clkr = {
+		.enable_reg = 0x372c,
+		.enable_mask = BIT(9),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs4_xcvr_clk",
+			.parent_names = (const char *[]){ "usb_hs4_xcvr_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_rcg usb_hsic_xcvr_fs_src = {
 	.ns_reg = 0x2928,
 	.md_reg = 0x2924,
@@ -2456,6 +2567,34 @@ static struct clk_branch usb_hs1_h_clk = {
 	},
 };
 
+static struct clk_branch usb_hs3_h_clk = {
+	.halt_reg = 0x2fc8,
+	.halt_bit = 31,
+	.clkr = {
+		.enable_reg = 0x3700,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs3_h_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch usb_hs4_h_clk = {
+	.halt_reg = 0x2fc8,
+	.halt_bit = 7,
+	.clkr = {
+		.enable_reg = 0x3720,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_hs4_h_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
 static struct clk_branch usb_hsic_h_clk = {
 	.halt_reg = 0x2fcc,
 	.halt_bit = 28,
@@ -2582,6 +2721,244 @@ static struct clk_branch adm0_pbus_clk = {
 	},
 };
 
+static struct freq_tbl clk_tbl_ce3[] = {
+	{ 48000000, P_PLL8, 8 },
+	{ 100000000, P_PLL3, 12 },
+	{ 120000000, P_PLL3, 10 },
+	{ }
+};
+
+static struct clk_rcg ce3_src = {
+	.ns_reg = 0x36c0,
+	.p = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.s = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll3_map,
+	},
+	.freq_tbl = clk_tbl_ce3,
+	.clkr = {
+		.enable_reg = 0x2c08,
+		.enable_mask = BIT(7),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce3_src",
+			.parent_names = gcc_pxo_pll8_pll3,
+			.num_parents = 3,
+			.ops = &clk_rcg_ops,
+			.flags = CLK_SET_RATE_GATE,
+		},
+	},
+};
+
+static struct clk_branch ce3_core_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 5,
+	.clkr = {
+		.enable_reg = 0x36c4,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce3_core_clk",
+			.parent_names = (const char *[]){ "ce3_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_branch ce3_h_clk = {
+	.halt_reg = 0x2fc4,
+	.halt_bit = 16,
+	.clkr = {
+		.enable_reg = 0x36c4,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce3_h_clk",
+			.parent_names = (const char *[]){ "ce3_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static const struct freq_tbl clk_tbl_sata_ref[] = {
+	{ 48000000, P_PLL8, 8, 0, 0 },
+	{ 100000000, P_PLL3, 12, 0, 0 },
+	{ }
+};
+
+static struct clk_rcg sata_clk_src = {
+	.ns_reg = 0x2c08,
+	.p = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.s = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll3_map,
+	},
+	.freq_tbl = clk_tbl_sata_ref,
+	.clkr = {
+		.enable_reg = 0x2c08,
+		.enable_mask = BIT(7),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_clk_src",
+			.parent_names = gcc_pxo_pll8_pll3,
+			.num_parents = 3,
+			.ops = &clk_rcg_ops,
+			.flags = CLK_SET_RATE_GATE,
+		},
+	},
+};
+
+static struct clk_branch sata_rxoob_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 26,
+	.clkr = {
+		.enable_reg = 0x2c0c,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_rxoob_clk",
+			.parent_names = (const char *[]){ "sata_clk_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_branch sata_pmalive_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 25,
+	.clkr = {
+		.enable_reg = 0x2c10,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_pmalive_clk",
+			.parent_names = (const char *[]){ "sata_clk_src" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_branch sata_phy_ref_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 24,
+	.clkr = {
+		.enable_reg = 0x2c14,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_phy_ref_clk",
+			.parent_names = (const char *[]){ "pxo" },
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+		},
+	},
+};
+
+static struct clk_branch sata_a_clk = {
+	.halt_reg = 0x2fc0,
+	.halt_bit = 12,
+	.clkr = {
+		.enable_reg = 0x2c20,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_a_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch sata_h_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 27,
+	.clkr = {
+		.enable_reg = 0x2c00,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_h_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch sfab_sata_s_h_clk = {
+	.halt_reg = 0x2fc4,
+	.halt_bit = 14,
+	.clkr = {
+		.enable_reg = 0x2480,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sfab_sata_s_h_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch sata_phy_cfg_clk = {
+	.halt_reg = 0x2fcc,
+	.halt_bit = 12,
+	.clkr = {
+		.enable_reg = 0x2c40,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "sata_phy_cfg_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch pcie_phy_ref_clk = {
+	.halt_reg = 0x2fdc,
+	.halt_bit = 29,
+	.clkr = {
+		.enable_reg = 0x22d0,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "pcie_phy_ref_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch pcie_h_clk = {
+	.halt_reg = 0x2fd4,
+	.halt_bit = 8,
+	.clkr = {
+		.enable_reg = 0x22cc,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "pcie_h_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
+static struct clk_branch pcie_a_clk = {
+	.halt_reg = 0x2fc0,
+	.halt_bit = 13,
+	.clkr = {
+		.enable_reg = 0x22c0,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "pcie_a_clk",
+			.ops = &clk_branch_ops,
+			.flags = CLK_IS_ROOT,
+		},
+	},
+};
+
 static struct clk_branch pmic_arb0_h_clk = {
 	.halt_reg = 0x2fd8,
 	.halt_check = BRANCH_HALT_VOTED,
@@ -2869,13 +3246,48 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
 };
 
 static struct clk_regmap *gcc_apq8064_clks[] = {
+	[PLL3] = &pll3.clkr,
 	[PLL8] = &pll8.clkr,
 	[PLL8_VOTE] = &pll8_vote,
+	[PLL14] = &pll14.clkr,
+	[PLL14_VOTE] = &pll14_vote,
+	[GSBI1_UART_SRC] = &gsbi1_uart_src.clkr,
+	[GSBI1_UART_CLK] = &gsbi1_uart_clk.clkr,
+	[GSBI2_UART_SRC] = &gsbi2_uart_src.clkr,
+	[GSBI2_UART_CLK] = &gsbi2_uart_clk.clkr,
+	[GSBI3_UART_SRC] = &gsbi3_uart_src.clkr,
+	[GSBI3_UART_CLK] = &gsbi3_uart_clk.clkr,
+	[GSBI4_UART_SRC] = &gsbi4_uart_src.clkr,
+	[GSBI4_UART_CLK] = &gsbi4_uart_clk.clkr,
+	[GSBI5_UART_SRC] = &gsbi5_uart_src.clkr,
+	[GSBI5_UART_CLK] = &gsbi5_uart_clk.clkr,
+	[GSBI6_UART_SRC] = &gsbi6_uart_src.clkr,
+	[GSBI6_UART_CLK] = &gsbi6_uart_clk.clkr,
 	[GSBI7_UART_SRC] = &gsbi7_uart_src.clkr,
 	[GSBI7_UART_CLK] = &gsbi7_uart_clk.clkr,
+	[GSBI1_QUP_SRC] = &gsbi1_qup_src.clkr,
+	[GSBI1_QUP_CLK] = &gsbi1_qup_clk.clkr,
+	[GSBI2_QUP_SRC] = &gsbi2_qup_src.clkr,
+	[GSBI2_QUP_CLK] = &gsbi2_qup_clk.clkr,
+	[GSBI3_QUP_SRC] = &gsbi3_qup_src.clkr,
+	[GSBI3_QUP_CLK] = &gsbi3_qup_clk.clkr,
+	[GSBI4_QUP_SRC] = &gsbi4_qup_src.clkr,
+	[GSBI4_QUP_CLK] = &gsbi4_qup_clk.clkr,
+	[GSBI5_QUP_SRC] = &gsbi5_qup_src.clkr,
+	[GSBI5_QUP_CLK] = &gsbi5_qup_clk.clkr,
+	[GSBI6_QUP_SRC] = &gsbi6_qup_src.clkr,
+	[GSBI6_QUP_CLK] = &gsbi6_qup_clk.clkr,
 	[GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr,
 	[GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr,
-	[GSBI7_H_CLK] = &gsbi7_h_clk.clkr,
+	[GP0_SRC] = &gp0_src.clkr,
+	[GP0_CLK] = &gp0_clk.clkr,
+	[GP1_SRC] = &gp1_src.clkr,
+	[GP1_CLK] = &gp1_clk.clkr,
+	[GP2_SRC] = &gp2_src.clkr,
+	[GP2_CLK] = &gp2_clk.clkr,
+	[PMEM_A_CLK] = &pmem_clk.clkr,
+	[PRNG_SRC] = &prng_src.clkr,
+	[PRNG_CLK] = &prng_clk.clkr,
 	[SDC1_SRC] = &sdc1_src.clkr,
 	[SDC1_CLK] = &sdc1_clk.clkr,
 	[SDC2_SRC] = &sdc2_src.clkr,
@@ -2884,10 +3296,155 @@ static struct clk_regmap *gcc_apq8064_clks[] = {
 	[SDC3_CLK] = &sdc3_clk.clkr,
 	[SDC4_SRC] = &sdc4_src.clkr,
 	[SDC4_CLK] = &sdc4_clk.clkr,
+	[TSIF_REF_SRC] = &tsif_ref_src.clkr,
+	[TSIF_REF_CLK] = &tsif_ref_clk.clkr,
+	[USB_HS1_XCVR_SRC] = &usb_hs1_xcvr_src.clkr,
+	[USB_HS1_XCVR_CLK] = &usb_hs1_xcvr_clk.clkr,
+	[USB_HS3_XCVR_SRC] = &usb_hs3_xcvr_src.clkr,
+	[USB_HS3_XCVR_CLK] = &usb_hs3_xcvr_clk.clkr,
+	[USB_HS4_XCVR_SRC] = &usb_hs4_xcvr_src.clkr,
+	[USB_HS4_XCVR_CLK] = &usb_hs4_xcvr_clk.clkr,
+	[USB_HSIC_XCVR_FS_SRC] = &usb_hsic_xcvr_fs_src.clkr,
+	[USB_HSIC_XCVR_FS_CLK] = &usb_hsic_xcvr_fs_clk.clkr,
+	[USB_HSIC_SYSTEM_CLK] = &usb_hsic_system_clk.clkr,
+	[USB_HSIC_HSIC_CLK] = &usb_hsic_hsic_clk.clkr,
+	[USB_HSIC_HSIO_CAL_CLK] = &usb_hsic_hsio_cal_clk.clkr,
+	[USB_FS1_XCVR_FS_SRC] = &usb_fs1_xcvr_fs_src.clkr,
+	[USB_FS1_XCVR_FS_CLK] = &usb_fs1_xcvr_fs_clk.clkr,
+	[USB_FS1_SYSTEM_CLK] = &usb_fs1_system_clk.clkr,
+	[SATA_H_CLK] = &sata_h_clk.clkr,
+	[SATA_CLK_SRC] = &sata_clk_src.clkr,
+	[SATA_RXOOB_CLK] = &sata_rxoob_clk.clkr,
+	[SATA_PMALIVE_CLK] = &sata_pmalive_clk.clkr,
+	[SATA_PHY_REF_CLK] = &sata_phy_ref_clk.clkr,
+	[SATA_PHY_CFG_CLK] = &sata_phy_cfg_clk.clkr,
+	[SATA_A_CLK] = &sata_a_clk.clkr,
+	[SFAB_SATA_S_H_CLK] = &sfab_sata_s_h_clk.clkr,
+	[CE3_SRC] = &ce3_src.clkr,
+	[CE3_CORE_CLK] = &ce3_core_clk.clkr,
+	[CE3_H_CLK] = &ce3_h_clk.clkr,
+	[DMA_BAM_H_CLK] = &dma_bam_h_clk.clkr,
+	[GSBI1_H_CLK] = &gsbi1_h_clk.clkr,
+	[GSBI2_H_CLK] = &gsbi2_h_clk.clkr,
+	[GSBI3_H_CLK] = &gsbi3_h_clk.clkr,
+	[GSBI4_H_CLK] = &gsbi4_h_clk.clkr,
+	[GSBI5_H_CLK] = &gsbi5_h_clk.clkr,
+	[GSBI6_H_CLK] = &gsbi6_h_clk.clkr,
+	[GSBI7_H_CLK] = &gsbi7_h_clk.clkr,
+	[TSIF_H_CLK] = &tsif_h_clk.clkr,
+	[USB_FS1_H_CLK] = &usb_fs1_h_clk.clkr,
+	[USB_HS1_H_CLK] = &usb_hs1_h_clk.clkr,
+	[USB_HSIC_H_CLK] = &usb_hsic_h_clk.clkr,
+	[USB_HS3_H_CLK] = &usb_hs3_h_clk.clkr,
+	[USB_HS4_H_CLK] = &usb_hs4_h_clk.clkr,
 	[SDC1_H_CLK] = &sdc1_h_clk.clkr,
 	[SDC2_H_CLK] = &sdc2_h_clk.clkr,
 	[SDC3_H_CLK] = &sdc3_h_clk.clkr,
 	[SDC4_H_CLK] = &sdc4_h_clk.clkr,
+	[ADM0_CLK] = &adm0_clk.clkr,
+	[ADM0_PBUS_CLK] = &adm0_pbus_clk.clkr,
+	[PCIE_A_CLK] = &pcie_a_clk.clkr,
+	[PCIE_PHY_REF_CLK] = &pcie_phy_ref_clk.clkr,
+	[PCIE_H_CLK] = &pcie_h_clk.clkr,
+	[PMIC_ARB0_H_CLK] = &pmic_arb0_h_clk.clkr,
+	[PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr,
+	[PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr,
+	[RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr,
+};
+
+static const struct qcom_reset_map gcc_apq8064_resets[] = {
+	[QDSS_STM_RESET] = { 0x2060, 6 },
+	[AFAB_SMPSS_S_RESET] = { 0x20b8, 2 },
+	[AFAB_SMPSS_M1_RESET] = { 0x20b8, 1 },
+	[AFAB_SMPSS_M0_RESET] = { 0x20b8 },
+	[AFAB_EBI1_CH0_RESET] = { 0x20c0, 7 },
+	[AFAB_EBI1_CH1_RESET] = { 0x20c4, 7},
+	[SFAB_ADM0_M0_RESET] = { 0x21e0, 7 },
+	[SFAB_ADM0_M1_RESET] = { 0x21e4, 7 },
+	[SFAB_ADM0_M2_RESET] = { 0x21e8, 7 },
+	[ADM0_C2_RESET] = { 0x220c, 4},
+	[ADM0_C1_RESET] = { 0x220c, 3},
+	[ADM0_C0_RESET] = { 0x220c, 2},
+	[ADM0_PBUS_RESET] = { 0x220c, 1 },
+	[ADM0_RESET] = { 0x220c },
+	[QDSS_CLKS_SW_RESET] = { 0x2260, 5 },
+	[QDSS_POR_RESET] = { 0x2260, 4 },
+	[QDSS_TSCTR_RESET] = { 0x2260, 3 },
+	[QDSS_HRESET_RESET] = { 0x2260, 2 },
+	[QDSS_AXI_RESET] = { 0x2260, 1 },
+	[QDSS_DBG_RESET] = { 0x2260 },
+	[SFAB_PCIE_M_RESET] = { 0x22d8, 1 },
+	[SFAB_PCIE_S_RESET] = { 0x22d8 },
+	[PCIE_EXT_PCI_RESET] = { 0x22dc, 6 },
+	[PCIE_PHY_RESET] = { 0x22dc, 5 },
+	[PCIE_PCI_RESET] = { 0x22dc, 4 },
+	[PCIE_POR_RESET] = { 0x22dc, 3 },
+	[PCIE_HCLK_RESET] = { 0x22dc, 2 },
+	[PCIE_ACLK_RESET] = { 0x22dc },
+	[SFAB_USB3_M_RESET] = { 0x2360, 7 },
+	[SFAB_RIVA_M_RESET] = { 0x2380, 7 },
+	[SFAB_LPASS_RESET] = { 0x23a0, 7 },
+	[SFAB_AFAB_M_RESET] = { 0x23e0, 7 },
+	[AFAB_SFAB_M0_RESET] = { 0x2420, 7 },
+	[AFAB_SFAB_M1_RESET] = { 0x2424, 7 },
+	[SFAB_SATA_S_RESET] = { 0x2480, 7 },
+	[SFAB_DFAB_M_RESET] = { 0x2500, 7 },
+	[DFAB_SFAB_M_RESET] = { 0x2520, 7 },
+	[DFAB_SWAY0_RESET] = { 0x2540, 7 },
+	[DFAB_SWAY1_RESET] = { 0x2544, 7 },
+	[DFAB_ARB0_RESET] = { 0x2560, 7 },
+	[DFAB_ARB1_RESET] = { 0x2564, 7 },
+	[PPSS_PROC_RESET] = { 0x2594, 1 },
+	[PPSS_RESET] = { 0x2594},
+	[DMA_BAM_RESET] = { 0x25c0, 7 },
+	[SPS_TIC_H_RESET] = { 0x2600, 7 },
+	[SFAB_CFPB_M_RESET] = { 0x2680, 7 },
+	[SFAB_CFPB_S_RESET] = { 0x26c0, 7 },
+	[TSIF_H_RESET] = { 0x2700, 7 },
+	[CE1_H_RESET] = { 0x2720, 7 },
+	[CE1_CORE_RESET] = { 0x2724, 7 },
+	[CE1_SLEEP_RESET] = { 0x2728, 7 },
+	[CE2_H_RESET] = { 0x2740, 7 },
+	[CE2_CORE_RESET] = { 0x2744, 7 },
+	[SFAB_SFPB_M_RESET] = { 0x2780, 7 },
+	[SFAB_SFPB_S_RESET] = { 0x27a0, 7 },
+	[RPM_PROC_RESET] = { 0x27c0, 7 },
+	[PMIC_SSBI2_RESET] = { 0x280c, 12 },
+	[SDC1_RESET] = { 0x2830 },
+	[SDC2_RESET] = { 0x2850 },
+	[SDC3_RESET] = { 0x2870 },
+	[SDC4_RESET] = { 0x2890 },
+	[USB_HS1_RESET] = { 0x2910 },
+	[USB_HSIC_RESET] = { 0x2934 },
+	[USB_FS1_XCVR_RESET] = { 0x2974, 1 },
+	[USB_FS1_RESET] = { 0x2974 },
+	[GSBI1_RESET] = { 0x29dc },
+	[GSBI2_RESET] = { 0x29fc },
+	[GSBI3_RESET] = { 0x2a1c },
+	[GSBI4_RESET] = { 0x2a3c },
+	[GSBI5_RESET] = { 0x2a5c },
+	[GSBI6_RESET] = { 0x2a7c },
+	[GSBI7_RESET] = { 0x2a9c },
+	[SPDM_RESET] = { 0x2b6c },
+	[TLMM_H_RESET] = { 0x2ba0, 7 },
+	[SATA_SFAB_M_RESET] = { 0x2c18 },
+	[SATA_RESET] = { 0x2c1c },
+	[GSS_SLP_RESET] = { 0x2c60, 7 },
+	[GSS_RESET] = { 0x2c64 },
+	[TSSC_RESET] = { 0x2ca0, 7 },
+	[PDM_RESET] = { 0x2cc0, 12 },
+	[MPM_H_RESET] = { 0x2da0, 7 },
+	[MPM_RESET] = { 0x2da4 },
+	[SFAB_SMPSS_S_RESET] = { 0x2e00, 7 },
+	[PRNG_RESET] = { 0x2e80, 12 },
+	[RIVA_RESET] = { 0x35e0 },
+	[CE3_H_RESET] = { 0x36c4, 7 },
+	[SFAB_CE3_M_RESET] = { 0x36c8, 1 },
+	[SFAB_CE3_S_RESET] = { 0x36c8 },
+	[CE3_RESET] = { 0x36cc, 7 },
+	[CE3_SLEEP_RESET] = { 0x36d0, 7 },
+	[USB_HS3_RESET] = { 0x3710 },
+	[USB_HS4_RESET] = { 0x3730 },
 };
 
 static const struct regmap_config gcc_msm8960_regmap_config = {
@@ -2898,6 +3455,14 @@ static const struct regmap_config gcc_msm8960_regmap_config = {
 	.fast_io	= true,
 };
 
+static const struct regmap_config gcc_apq8064_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= 0x3880,
+	.fast_io	= true,
+};
+
 static const struct qcom_cc_desc gcc_msm8960_desc = {
 	.config = &gcc_msm8960_regmap_config,
 	.clks = gcc_msm8960_clks,
@@ -2907,11 +3472,11 @@ static const struct qcom_cc_desc gcc_msm8960_desc = {
 };
 
 static const struct qcom_cc_desc gcc_apq8064_desc = {
-	.config = &gcc_msm8960_regmap_config,
+	.config = &gcc_apq8064_regmap_config,
 	.clks = gcc_apq8064_clks,
 	.num_clks = ARRAY_SIZE(gcc_apq8064_clks),
-	.resets = gcc_msm8960_resets,
-	.num_resets = ARRAY_SIZE(gcc_msm8960_resets),
+	.resets = gcc_apq8064_resets,
+	.num_resets = ARRAY_SIZE(gcc_apq8064_resets),
 };
 
 static const struct of_device_id gcc_msm8960_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8960.h b/include/dt-bindings/clock/qcom,gcc-msm8960.h
index f9f5471..7d20eed 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8960.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8960.h
@@ -308,5 +308,16 @@
 #define PLL13					292
 #define PLL14					293
 #define PLL14_VOTE				294
+#define USB_HS3_H_CLK				295
+#define USB_HS3_XCVR_SRC			296
+#define USB_HS3_XCVR_CLK			297
+#define USB_HS4_H_CLK				298
+#define USB_HS4_XCVR_SRC			299
+#define USB_HS4_XCVR_CLK			300
+#define SATA_PHY_CFG_CLK			301
+#define SATA_A_CLK				302
+#define CE3_SRC					303
+#define CE3_CORE_CLK				304
+#define CE3_H_CLK				305
 
 #endif
diff --git a/include/dt-bindings/reset/qcom,gcc-msm8960.h b/include/dt-bindings/reset/qcom,gcc-msm8960.h
index 07edd0e..47c8686 100644
--- a/include/dt-bindings/reset/qcom,gcc-msm8960.h
+++ b/include/dt-bindings/reset/qcom,gcc-msm8960.h
@@ -114,5 +114,21 @@
 #define SFAB_SMPSS_S_RESET				97
 #define PRNG_RESET					98
 #define RIVA_RESET					99
+#define USB_HS3_RESET					100
+#define USB_HS4_RESET					101
+#define CE3_RESET					102
+#define PCIE_EXT_PCI_RESET				103
+#define PCIE_PHY_RESET					104
+#define PCIE_PCI_RESET					105
+#define PCIE_POR_RESET					106
+#define PCIE_HCLK_RESET					107
+#define PCIE_ACLK_RESET					108
+#define CE3_H_RESET					109
+#define SFAB_CE3_M_RESET				110
+#define SFAB_CE3_S_RESET				111
+#define SATA_RESET					112
+#define CE3_SLEEP_RESET					113
+#define GSS_SLP_RESET					114
+#define GSS_RESET					115
 
 #endif
-- 
1.9.1

[PATCH v2 0/2] Support apq8064 global clock control

[Srinivas Kandagatla]

Hi Mike,

Could you please consider these patches for v3.17 as some of the drivers 
which require these clocks are already making there way to 3.17.


Thanks,
srini

On 10/07/14 09:16, Srinivas Kandagatla wrote:
> These two patches add full support for apq8064 in the global clock
> controller driver. The first patch has already been on the list so
> I've picked it up and resent because the second patch depends on it.
>
> Am resending the series with the fix to my patch.
>
> Changes since v1:
> 	- fixed comment log spotted by Andreas.
> 	- added few more sdcc clocks.
>
> Srinivas Kandagatla (1):
>    clk: qcom: add clocks necessary for apq8064 sdcc
>
> Stephen Boyd (1):
>    clk: qcom: Fully support apq8064 global clock control
>
>   drivers/clk/qcom/gcc-msm8960.c               | 583 ++++++++++++++++++++++++++-
>   include/dt-bindings/clock/qcom,gcc-msm8960.h |  11 +
>   include/dt-bindings/reset/qcom,gcc-msm8960.h |  16 +
>   3 files changed, 607 insertions(+), 3 deletions(-)
>