From mboxrd@z Thu Jan 1 00:00:00 1970 From: shc_work@mail.ru (Alexander Shiyan) Date: Sun, 13 Jul 2014 08:45:36 +0400 Subject: [PATCH RESEND 2/2] clocksource: clps711x: Add DT bindings documentation Message-ID: <1405226736-5122-1-git-send-email-shc_work@mail.ru> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds DT binding documentation for the Cirrus Logic CLPS711X-based CPUs clocksource subsystem. Signed-off-by: Alexander Shiyan Acked-by: Arnd Bergmann --- .../bindings/timer/cirrus,clps711x-timer.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt diff --git a/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt new file mode 100644 index 0000000..cd55b52 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt @@ -0,0 +1,29 @@ +* Cirrus Logic CLPS711X Timer Counter + +Required properties: +- compatible: Shall contain "cirrus,clps711x-timer". +- reg : Address and length of the register set. +- interrupts: The interrupt number of the timer. +- clocks : phandle of timer reference clock. + +Note: Each timer should have an alias correctly numbered in "aliases" node. + +Example: + aliases { + timer0 = &timer1; + timer1 = &timer2; + }; + + timer1: timer at 80000300 { + compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer"; + reg = <0x80000300 0x4>; + interrupts = <8>; + clocks = <&clks 5>; + }; + + timer2: timer at 80000340 { + compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer"; + reg = <0x80000340 0x4>; + interrupts = <9>; + clocks = <&clks 6>; + }; -- 1.8.5.5