From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Mon, 14 Jul 2014 15:33:25 +0100 Subject: [PATCH v2 04/11] ARM: stih416-b2020e: Enable PWM on the B2020 Rev-E In-Reply-To: <1405348412-7352-1-git-send-email-lee.jones@linaro.org> References: <1405348412-7352-1-git-send-email-lee.jones@linaro.org> Message-ID: <1405348412-7352-5-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org All the infrastructure is now in place for ST's PWM controller. This patch takes the final step and enables the IP on the 2020 Rev-E development platform. Signed-off-by: Ajit Pal Singh Signed-off-by: Lee Jones --- arch/arm/boot/dts/stih416-b2020e.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index ba0fa2c..07cbf5b 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -31,5 +31,15 @@ ethernet1: dwmac at fef08000 { snps,reset-gpio = <&PIO0 7>; }; + + /* SAS PWM Module */ + pwm0: pwm at fed10000 { + status = "okay"; + }; + + /* SBC PWM Module */ + pwm1: pwm at fe510000 { + status = "okay"; + }; }; }; -- 1.8.3.2