From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/5] ARM: dts: sun6i: Add pin muxing options for GMAC
Date: Wed, 16 Jul 2014 01:15:43 +0800 [thread overview]
Message-ID: <1405444547-21870-2-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1405444547-21870-1-git-send-email-wens@csie.org>
The A31 SoC has a GMAC gigabit ethernet controller supporting
MII, GMII, RGMII modes. Add pin muxing options for these modes.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index baf8eff..47e143a 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -467,6 +467,48 @@
allwinner,drive = <2>;
allwinner,pull = <0>;
};
+
+ gmac_pins_mii_a: gmac_mii at 0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA8", "PA9", "PA11",
+ "PA12", "PA13", "PA14", "PA19",
+ "PA20", "PA21", "PA22", "PA23",
+ "PA24", "PA26", "PA27";
+ allwinner,function = "gmac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_gmii_a: gmac_gmii at 0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA4", "PA5", "PA6", "PA7",
+ "PA8", "PA9", "PA10", "PA11",
+ "PA12", "PA13", "PA14", "PA15",
+ "PA16", "PA17", "PA18", "PA19",
+ "PA20", "PA21", "PA22", "PA23",
+ "PA24", "PA25", "PA26", "PA27";
+ allwinner,function = "gmac";
+ /*
+ * data lines in GMII mode run at 125MHz and
+ * might need a higher signal drive strength
+ */
+ allwinner,drive = <2>;
+ allwinner,pull = <0>;
+ };
+
+ gmac_pins_rgmii_a: gmac_rgmii at 0 {
+ allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+ "PA9", "PA10", "PA11",
+ "PA12", "PA13", "PA14", "PA19",
+ "PA20", "PA25", "PA26", "PA27";
+ allwinner,function = "gmac";
+ /*
+ * data lines in RGMII mode use DDR mode
+ * and need a higher signal drive strength
+ */
+ allwinner,drive = <3>;
+ allwinner,pull = <0>;
+ };
};
ahb1_rst: reset at 01c202c0 {
--
2.0.1
next prev parent reply other threads:[~2014-07-15 17:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-15 17:15 [PATCH v2 0/5] ARM: dts: sun6i: Add support for GMAC Chen-Yu Tsai
2014-07-15 17:15 ` Chen-Yu Tsai [this message]
2014-07-15 17:15 ` [PATCH v2 2/5] ARM: dts: sun6i: Add GMAC clock node to the A31 dtsi Chen-Yu Tsai
2014-07-15 17:15 ` [PATCH v2 3/5] ARM: dts: sun6i: Add A31 GMAC gigabit ethernet controller node Chen-Yu Tsai
2014-07-15 17:15 ` [PATCH v2 4/5] ARM: dts: sun6i: Add ethernet alias for GMAC Chen-Yu Tsai
2014-07-15 17:15 ` [PATCH v2 5/5] ARM: dts: sun6i: Add Merrii A31 Hummingbird support Chen-Yu Tsai
2014-07-18 20:38 ` [PATCH v2 0/5] ARM: dts: sun6i: Add support for GMAC Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405444547-21870-2-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).