From mboxrd@z Thu Jan 1 00:00:00 1970 From: antoine.tenart@free-electrons.com (=?UTF-8?q?Antoine=20T=C3=A9nart?=) Date: Wed, 16 Jul 2014 10:26:00 +0200 Subject: [PATCH v3 06/12] Documentation: bindings: add doc for the Berlin USB PHY In-Reply-To: <1405499166-6726-1-git-send-email-antoine.tenart@free-electrons.com> References: <1405499166-6726-1-git-send-email-antoine.tenart@free-electrons.com> Message-ID: <1405499166-6726-7-git-send-email-antoine.tenart@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Document the bindings of the Marvell Berlin USB PHY driver. Signed-off-by: Antoine T?nart --- Documentation/devicetree/bindings/phy/berlin-usb-phy.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt diff --git a/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt new file mode 100644 index 000000000000..be33780f668e --- /dev/null +++ b/Documentation/devicetree/bindings/phy/berlin-usb-phy.txt @@ -0,0 +1,16 @@ +* Marvell Berlin USB PHY + +Required properties: +- compatible: "marvell,berlin2-usb-phy" or "marvell,berlin2cd-usb-phy" +- reg: base address and length of the registers +- #phys-cells: should be 0 +- resets: reference to the reset controller + +Example: + + usb-phy at f774000 { + compatible = "marvell,berlin2-usb-phy"; + reg = <0xf774000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x104 14>; + }; -- 1.9.1