From: dinguyen@altera.com (Dinh Nguyen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv5 3/5] ARM: dts: socfpga: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
Date: Wed, 16 Jul 2014 16:06:09 -0500 [thread overview]
Message-ID: <1405544769.6107.1.camel@linux-builds1> (raw)
In-Reply-To: <1405050587-5577-4-git-send-email-jh80.chung@samsung.com>
On Fri, 2014-07-11 at 12:49 +0900, Jaehoon Chung wrote:
> dw-mmc controller can support multiple slots.
> But, there are no use-cases anywhere. So we don't need to support the
> slot-node for dw-mmc controller.
> And "supports-highspeed" property in dw-mmc is deprecated.
> "supports-highspeed" property can be replaced to "cap-sd/mmc-highspeed".
>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Reviewed-by: Tushar Behera <trblinux@gmail.com>
> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
> Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
> ---
> arch/arm/boot/dts/socfpga_arria5.dtsi | 9 +++------
> arch/arm/boot/dts/socfpga_cyclone5.dtsi | 9 +++------
> arch/arm/boot/dts/socfpga_vt.dts | 9 +++------
> 3 files changed, 9 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
> index 12d1c2c..468fc4c 100644
> --- a/arch/arm/boot/dts/socfpga_arria5.dtsi
> +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
> @@ -29,13 +29,10 @@
>
> dwmmc0 at ff704000 {
> num-slots = <1>;
> - supports-highspeed;
> broken-cd;
> -
> - slot at 0 {
> - reg = <0>;
> - bus-width = <4>;
> - };
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> };
>
> sysmgr at ffd08000 {
> diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
> index bf51182..1ee03c4 100644
> --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
> +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
> @@ -30,13 +30,10 @@
>
> dwmmc0 at ff704000 {
> num-slots = <1>;
> - supports-highspeed;
> broken-cd;
> -
> - slot at 0 {
> - reg = <0>;
> - bus-width = <4>;
> - };
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> };
>
> ethernet at ff702000 {
> diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
> index 09792b4..f9345e0 100644
> --- a/arch/arm/boot/dts/socfpga_vt.dts
> +++ b/arch/arm/boot/dts/socfpga_vt.dts
> @@ -43,13 +43,10 @@
>
> dwmmc0 at ff704000 {
> num-slots = <1>;
> - supports-highspeed;
> broken-cd;
> -
> - slot at 0 {
> - reg = <0>;
> - bus-width = <4>;
> - };
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> };
>
> ethernet at ff700000 {
Acked-by: Dinh Nguyen <dinguyen@altera.com>
Thanks,
Dinh
next prev parent reply other threads:[~2014-07-16 21:06 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-11 3:49 [PATCHv5 0/5] ARM: remove the sub-node and deprecated supports-highspeed property for dwmmc Jaehoon Chung
2014-07-11 3:49 ` [PATCHv5 1/5] mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed Jaehoon Chung
2014-07-11 3:49 ` [PATCHv5 2/5] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc Jaehoon Chung
2014-07-11 3:49 ` [PATCHv5 3/5] ARM: dts: socfpga: " Jaehoon Chung
2014-07-16 21:06 ` Dinh Nguyen [this message]
2014-07-11 3:49 ` [PATCHv5 4/5] ARM: dts: rockchip: " Jaehoon Chung
2014-07-11 3:49 ` [PATCHv5 5/5] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405544769.6107.1.camel@linux-builds1 \
--to=dinguyen@altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).