From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Mon, 21 Jul 2014 22:54:27 +0800 Subject: [PATCH] ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes Message-ID: <1405954467-29331-1-git-send-email-wens@csie.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org dtc was giving warnings for missing #address-cells and #size-cells for the new sun6i-a31-hummingbird.dts, which has a i2c-based rtc device. This patch adds the properties for all i2c controller nodes for sun6i. Signed-off-by: Chen-Yu Tsai --- Hi Maxime, This is a fix to get rid of warnings from dtc when building sun6i dts. Sorry for now catching it earlier. Cheers ChenYu --- arch/arm/boot/dts/sun6i-a31.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 44b07e5..e06fbfc 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -660,6 +660,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c at 01c2b000 { @@ -670,6 +672,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c at 01c2b400 { @@ -680,6 +684,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c at 01c2b800 { @@ -690,6 +696,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet at 01c30000 { -- 2.0.1