From: ard.biesheuvel@linaro.org (Ard Biesheuvel)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 01/10] arm64/efi: efistub: jump to 'stext' directly, not through the header
Date: Mon, 21 Jul 2014 17:16:16 +0200 [thread overview]
Message-ID: <1405955785-13477-2-git-send-email-ard.biesheuvel@linaro.org> (raw)
In-Reply-To: <1405955785-13477-1-git-send-email-ard.biesheuvel@linaro.org>
After the EFI stub has done its business, it jumps into the kernel by branching
to offset #0 of the loaded Image, which is where it expects to find the header
containing a 'branch to stext' instruction.
However, the header is not covered by any PE/COFF section, so the header may
not actually be loaded at the expected offset. So instead, jump to 'stext'
directly, which is at the base of the PE/COFF .text section, by supplying a
symbol 'stext_offset' to efi-entry.o which contains the relative offset of
stext into the Image. Also replace other open coded calculations of the same
value with a reference to 'stext_offset'
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
arch/arm64/kernel/efi-entry.S | 3 ++-
arch/arm64/kernel/head.S | 10 ++++++----
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S
index 619b1dd7bcde..a0016d3a17da 100644
--- a/arch/arm64/kernel/efi-entry.S
+++ b/arch/arm64/kernel/efi-entry.S
@@ -61,7 +61,8 @@ ENTRY(efi_stub_entry)
*/
mov x20, x0 // DTB address
ldr x0, [sp, #16] // relocated _text address
- mov x21, x0
+ ldr x21, =stext_offset
+ add x21, x0, x21
/*
* Flush dcache covering current runtime addresses
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 69dafe9621fd..5cd1f3491df5 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -129,6 +129,8 @@ efi_head:
#endif
#ifdef CONFIG_EFI
+ .globl stext_offset
+ .set stext_offset, stext - efi_head
.align 3
pe_header:
.ascii "PE"
@@ -152,7 +154,7 @@ optional_header:
.long 0 // SizeOfInitializedData
.long 0 // SizeOfUninitializedData
.long efi_stub_entry - efi_head // AddressOfEntryPoint
- .long stext - efi_head // BaseOfCode
+ .long stext_offset // BaseOfCode
extra_header_fields:
.quad 0 // ImageBase
@@ -169,7 +171,7 @@ extra_header_fields:
.long _edata - efi_head // SizeOfImage
// Everything before the kernel image is considered part of the header
- .long stext - efi_head // SizeOfHeaders
+ .long stext_offset // SizeOfHeaders
.long 0 // CheckSum
.short 0xa // Subsystem (EFI application)
.short 0 // DllCharacteristics
@@ -214,9 +216,9 @@ section_table:
.byte 0
.byte 0 // end of 0 padding of section name
.long _edata - stext // VirtualSize
- .long stext - efi_head // VirtualAddress
+ .long stext_offset // VirtualAddress
.long _edata - stext // SizeOfRawData
- .long stext - efi_head // PointerToRawData
+ .long stext_offset // PointerToRawData
.long 0 // PointerToRelocations (0 for executables)
.long 0 // PointerToLineNumbers (0 for executables)
--
1.8.3.2
next prev parent reply other threads:[~2014-07-21 15:16 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-21 15:16 [RFC PATCH 00/10] arm64: boot BE kernels from UEFI Ard Biesheuvel
2014-07-21 15:16 ` Ard Biesheuvel [this message]
2014-07-21 15:16 ` [RFC PATCH 02/10] arm64/efi: efistub: cover entire static mem footprint in PE/COFF .text Ard Biesheuvel
2014-07-21 15:16 ` [RFC PATCH 03/10] arm64: add macros to emit little endian ASM constants Ard Biesheuvel
2014-07-21 15:16 ` [RFC PATCH 04/10] arm64: add EFI little endian constants to linker script Ard Biesheuvel
2014-07-30 14:18 ` Matt Fleming
2014-07-30 14:21 ` Ard Biesheuvel
2014-07-30 14:22 ` Will Deacon
2014-07-21 15:16 ` [RFC PATCH 05/10] arm64/efi: update the PE/COFF header to be endian agnostic Ard Biesheuvel
2014-07-21 15:16 ` [RFC PATCH 06/10] arm64/efi: efistub: avoid using linker defined constants Ard Biesheuvel
2014-07-21 15:16 ` [RFC PATCH 07/10] arm64/efi: efistub: add support for booting a BE kernel Ard Biesheuvel
2014-07-21 15:16 ` [RFC PATCH 08/10] arm64/efi: use LE accessors to access UEFI data Ard Biesheuvel
2014-07-21 15:16 ` [RFC PATCH 09/10] arm64/efi: enable minimal UEFI Runtime Services for big endian Ard Biesheuvel
2014-07-23 9:34 ` Mark Rutland
2014-07-23 10:59 ` Ard Biesheuvel
2014-07-23 17:52 ` Ard Biesheuvel
2014-07-21 15:16 ` [RFC PATCH 10/10] arm64: Kconfig: enable UEFI on BE kernels Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405955785-13477-2-git-send-email-ard.biesheuvel@linaro.org \
--to=ard.biesheuvel@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).