From: mitchelh@codeaurora.org (Mitchel Humpherys)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] iommu/arm-smmu: avoid calling request_irq in atomic context
Date: Mon, 28 Jul 2014 11:38:12 -0700 [thread overview]
Message-ID: <1406572692-27460-1-git-send-email-mitchelh@codeaurora.org> (raw)
request_irq shouldn't be called from atomic context since it might
sleep, but we're calling it with a spinlock held, resulting in:
[ 9.172202] BUG: sleeping function called from invalid context at kernel/mm/slub.c:926
[ 9.182989] in_atomic(): 1, irqs_disabled(): 128, pid: 1, name: swapper/0
[ 9.189762] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.40-gbc1b510b-38437-g55831d3bd9-dirty #97
[ 9.199757] [<c020c448>] (unwind_backtrace+0x0/0x11c) from [<c02097d0>] (show_stack+0x10/0x14)
[ 9.208346] [<c02097d0>] (show_stack+0x10/0x14) from [<c0301d74>] (kmem_cache_alloc_trace+0x3c/0x210)
[ 9.217543] [<c0301d74>] (kmem_cache_alloc_trace+0x3c/0x210) from [<c0276a48>] (request_threaded_irq+0x88/0x11c)
[ 9.227702] [<c0276a48>] (request_threaded_irq+0x88/0x11c) from [<c0931ca4>] (arm_smmu_attach_dev+0x188/0x858)
[ 9.237686] [<c0931ca4>] (arm_smmu_attach_dev+0x188/0x858) from [<c0212cd8>] (arm_iommu_attach_device+0x18/0xd0)
[ 9.247837] [<c0212cd8>] (arm_iommu_attach_device+0x18/0xd0) from [<c093314c>] (arm_smmu_test_probe+0x68/0xd4)
[ 9.257823] [<c093314c>] (arm_smmu_test_probe+0x68/0xd4) from [<c05aadd0>] (driver_probe_device+0x12c/0x330)
[ 9.267629] [<c05aadd0>] (driver_probe_device+0x12c/0x330) from [<c05ab080>] (__driver_attach+0x68/0x8c)
[ 9.277090] [<c05ab080>] (__driver_attach+0x68/0x8c) from [<c05a92d4>] (bus_for_each_dev+0x70/0x84)
[ 9.286118] [<c05a92d4>] (bus_for_each_dev+0x70/0x84) from [<c05aa3b0>] (bus_add_driver+0x100/0x244)
[ 9.295233] [<c05aa3b0>] (bus_add_driver+0x100/0x244) from [<c05ab5d0>] (driver_register+0x9c/0x124)
[ 9.304347] [<c05ab5d0>] (driver_register+0x9c/0x124) from [<c0933088>] (arm_smmu_test_init+0x14/0x38)
[ 9.313635] [<c0933088>] (arm_smmu_test_init+0x14/0x38) from [<c0200618>] (do_one_initcall+0xb8/0x160)
[ 9.322926] [<c0200618>] (do_one_initcall+0xb8/0x160) from [<c1200b7c>] (kernel_init_freeable+0x108/0x1cc)
[ 9.332564] [<c1200b7c>] (kernel_init_freeable+0x108/0x1cc) from [<c0b924b0>] (kernel_init+0xc/0xe4)
[ 9.341675] [<c0b924b0>] (kernel_init+0xc/0xe4) from [<c0205e38>] (ret_from_fork+0x14/0x3c)
Fix this by moving the request_irq out of the critical section. This
should be okay since smmu_domain->smmu is still being protected by the
critical section. Also, we still don't program the Stream Match Register
until after registering our interrupt handler so we shouldn't be missing
any interrupts.
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
---
Changelog:
- v2: return error code from request_irq on failure
---
drivers/iommu/arm-smmu.c | 37 +++++++++++++++++--------------------
1 file changed, 17 insertions(+), 20 deletions(-)
---
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index f3f66416e2..8e17f8d2e4 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -868,7 +868,7 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain)
static int arm_smmu_init_domain_context(struct iommu_domain *domain,
struct arm_smmu_device *smmu)
{
- int irq, ret, start;
+ int ret, start;
struct arm_smmu_domain *smmu_domain = domain->priv;
struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
@@ -900,23 +900,9 @@ static int arm_smmu_init_domain_context(struct iommu_domain *domain,
cfg->irptndx = cfg->cbndx;
}
- irq = smmu->irqs[smmu->num_global_irqs + cfg->irptndx];
- ret = request_irq(irq, arm_smmu_context_fault, IRQF_SHARED,
- "arm-smmu-context-fault", domain);
- if (IS_ERR_VALUE(ret)) {
- dev_err(smmu->dev, "failed to request context IRQ %d (%u)\n",
- cfg->irptndx, irq);
- cfg->irptndx = INVALID_IRPTNDX;
- goto out_free_context;
- }
-
smmu_domain->smmu = smmu;
arm_smmu_init_context_bank(smmu_domain);
return 0;
-
-out_free_context:
- __arm_smmu_free_bitmap(smmu->context_map, cfg->cbndx);
- return ret;
}
static void arm_smmu_destroy_domain_context(struct iommu_domain *domain)
@@ -1172,10 +1158,11 @@ static void arm_smmu_domain_remove_master(struct arm_smmu_domain *smmu_domain,
static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
{
- int ret = -EINVAL;
+ int irq, ret = -EINVAL;
struct arm_smmu_domain *smmu_domain = domain->priv;
struct arm_smmu_device *smmu;
- struct arm_smmu_master_cfg *cfg;
+ struct arm_smmu_master_cfg *master_cfg;
+ struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
unsigned long flags;
smmu = dev_get_master_dev(dev)->archdata.iommu;
@@ -1203,12 +1190,22 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev)
}
spin_unlock_irqrestore(&smmu_domain->lock, flags);
+ irq = smmu->irqs[smmu->num_global_irqs + cfg->irptndx];
+ ret = request_irq(irq, arm_smmu_context_fault, IRQF_SHARED,
+ "arm-smmu-context-fault", domain);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(smmu->dev, "failed to request context IRQ %d (%u)\n",
+ cfg->irptndx, irq);
+ cfg->irptndx = INVALID_IRPTNDX;
+ return ret;
+ }
+
/* Looks ok, so add the device to the domain */
- cfg = find_smmu_master_cfg(smmu_domain->smmu, dev);
- if (!cfg)
+ master_cfg = find_smmu_master_cfg(smmu_domain->smmu, dev);
+ if (!master_cfg)
return -ENODEV;
- return arm_smmu_domain_add_master(smmu_domain, cfg);
+ return arm_smmu_domain_add_master(smmu_domain, master_cfg);
err_unlock:
spin_unlock_irqrestore(&smmu_domain->lock, flags);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next reply other threads:[~2014-07-28 18:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-28 18:38 Mitchel Humpherys [this message]
2014-07-28 19:03 ` [PATCH v2] iommu/arm-smmu: avoid calling request_irq in atomic context Will Deacon
2014-07-28 23:48 ` Mitchel Humpherys
2014-07-29 10:31 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406572692-27460-1-git-send-email-mitchelh@codeaurora.org \
--to=mitchelh@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).