[PATCH V3 3/7] ARM: dts: Add i2c bus 1 and it's audio codec child node on smdk5420

[t.figa@samsung.com (Tomasz Figa)]

On Wednesday 07 of August 2013 14:40:12 Padmavathi Venna wrote:
> This patch adds i2c bus 1 and wm8994 codec node on i2c bus1 and the
> required regulator supplies and properties on smdk5420 board.
> 
> Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5420-smdk5420.dts |   58
> +++++++++++++++++++++++++++++ 1 files changed, 58 insertions(+), 0
> deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> b/arch/arm/boot/dts/exynos5420-smdk5420.dts index d05de7a..e86c1ae
> 100644
> --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
> @@ -68,4 +68,62 @@
>  			bus-width = <4>;
>  		};
>  	};
> +
> +	avdd2: fixed-regulator at 0 {

@ suffix should be present only if reg property is present as well. 
Otherwise a suffix separated with "-" should be used, like fixed-
regulator-0.

> +		compatible = "regulator-fixed";
> +		regulator-name = "avdd2-supply";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-always-on;
> +	};
> +
> +	cpvdd: fixed-regulator at 1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "cpvdd-supply";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-always-on;
> +	};
> +
> +	dbvdd: fixed-regulator at 2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "dbvdd-supply";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	spkvdd: fixed-regulator at 3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "spkvdd-supply";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};

All these regulators should be made subnodes of a fixed-regulators node 
aggregating all fixed regulators on the board, like on following example:

	fixed-regulators {
		avdd2: fixed-regulator-0 {
			compatible = "regulator-fixed";
			regulator-name = "avdd2-supply";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-always-on;
		};

		cpvdd: fixed-regulator-1 {
			compatible = "regulator-fixed";
			regulator-name = "cpvdd-supply";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-always-on;
		};

		/* ... */
	};

Best regards,
Tomasz