From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Sun, 17 Aug 2014 11:52:08 +0800 Subject: [PATCH 02/12] ARM: dts: sun8i: Add R_PIO controller node to the dtsi In-Reply-To: <1408247538-16950-1-git-send-email-wens@csie.org> References: <1408247538-16950-1-git-send-email-wens@csie.org> Message-ID: <1408247538-16950-3-git-send-email-wens@csie.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Now that we have a driver for the R_PIO controller, add the corresponding device node to the dtsi. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-a23.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 41823b1..a40e632 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -353,5 +353,18 @@ resets = <&apb0_rst 4>; status = "disabled"; }; + + r_pio: pinctrl at 01f02c00 { + compatible = "allwinner,sun8i-a23-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <0 45 4>; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + }; }; }; -- 2.1.0