From: dianders@chromium.org (Doug Anderson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: dts: Add main PWM info to rk3288
Date: Mon, 18 Aug 2014 10:09:08 -0700 [thread overview]
Message-ID: <1408381749-14156-4-git-send-email-dianders@chromium.org> (raw)
In-Reply-To: <1408381749-14156-1-git-send-email-dianders@chromium.org>
This adds the PWM info (other than the VOP PWM) to the main rk3288
dtsi file.
Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
Signed-off-by: Doug Anderson <dianders@chromium.org>
---
arch/arm/boot/dts/rk3288.dtsi | 68 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 36be7bb..9c9d9c5 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -261,6 +261,50 @@
status = "disabled";
};
+ pwm0: pwm at ff680000 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680000 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm1: pwm at ff680010 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680010 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm2: pwm at ff680020 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680020 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm3: pwm at ff680030 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680030 0x10>;
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
pmu: power-management at ff730000 {
compatible = "rockchip,rk3288-pmu", "syscon";
reg = <0xff730000 0x100>;
@@ -611,5 +655,29 @@
rockchip,pins = <5 15 3 &pcfg_pull_none>;
};
};
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <7 22 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <7 23 RK_FUNC_3 &pcfg_pull_none>;
+ };
+ };
};
};
--
2.1.0.rc2.206.gedb03e5
next prev parent reply other threads:[~2014-08-18 17:09 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-18 17:09 [PATCH 0/4] PWM changes for rk3288-evb Doug Anderson
2014-08-18 17:09 ` [PATCH 1/4] ARM: rockchip: rk3288: Switch to use the proper PWM IP Doug Anderson
2014-08-18 17:11 ` Sonny Rao
2014-08-18 17:19 ` Doug Anderson
2014-08-19 7:10 ` Thierry Reding
2014-08-19 15:18 ` Doug Anderson
2014-08-20 6:08 ` Thierry Reding
2014-08-20 15:20 ` Doug Anderson
2014-08-20 15:38 ` Thierry Reding
2014-08-20 15:55 ` Doug Anderson
2014-08-20 16:20 ` Heiko Stübner
2014-08-20 16:27 ` Doug Anderson
2014-08-20 18:03 ` Heiko Stübner
2014-08-20 20:49 ` Doug Anderson
2014-08-21 6:36 ` Thierry Reding
2014-08-21 15:38 ` Doug Anderson
2014-08-21 15:49 ` Tomasz Figa
2014-08-21 16:49 ` Thierry Reding
2014-08-21 16:47 ` Thierry Reding
2014-08-25 23:40 ` Doug Anderson
2014-08-26 7:31 ` Thierry Reding
2014-08-21 6:24 ` Thierry Reding
2014-08-21 15:39 ` Doug Anderson
2014-08-21 15:53 ` Heiko Stübner
2014-08-18 17:09 ` [PATCH 2/4] pwm: rockchip: Allow polarity invert on rk3288 Doug Anderson
2014-08-19 7:18 ` Thierry Reding
2014-08-19 16:05 ` Doug Anderson
2014-08-20 6:09 ` Thierry Reding
2014-08-18 17:09 ` Doug Anderson [this message]
2014-08-18 17:09 ` [PATCH 4/4] ARM: dts: Enable pwm backlight on rk3288-EVB Doug Anderson
2014-08-19 7:22 ` Thierry Reding
2014-08-19 16:05 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408381749-14156-4-git-send-email-dianders@chromium.org \
--to=dianders@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).