From: wills.wang.open@gmail.com (Wills Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATH v6 0/2] ARM: dts: sun7i: Add Merrii A20 Hummingbird support
Date: Tue, 19 Aug 2014 15:32:59 +0800 [thread overview]
Message-ID: <1408433581-14417-1-git-send-email-wills.wang.open@gmail.com> (raw)
Changes since v5:
- add generic pinmux spi2_pins_b
- remove redundant newline
Changes since v4:
- move generic pinmux into a20 dtsi
- add the board name as suffix
Changes since v3:
- adjust dtb file in alphabetic order
Changes since v2:
- fixed mistake about uart3/4/5 pinctrl config
Changes since v1:
- add Signed-off-by and commit msg
- add uart2/3/4/5, i2c3 and spi2
- remove pwm1 node
- use reg_vcc3v0 according to board schematic
- add comment for gpio pin
- remove unused pull-up pin setting
Wills Wang (2):
ARM: dts: sun7i: Add uart3/4/5, i2c3 and spi2 pinmux
ARM: dts: sun7i: Add Merrii A20 Hummingbird board
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 236 ++++++++++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 35 +++++
3 files changed, 272 insertions(+)
create mode 100644 arch/arm/boot/dts/sun7i-a20-hummingbird.dts
--
1.8.3.2
next reply other threads:[~2014-08-19 7:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-19 7:32 Wills Wang [this message]
2014-08-19 7:33 ` [PATH v6 1/2] ARM: dts: sun7i: Add uart3/4/5, i2c3 and spi2 pinmux Wills Wang
2014-08-19 10:31 ` Maxime Ripard
2014-08-19 7:33 ` [PATH v6 2/2] ARM: dts: sun7i: Add Merrii A20 Hummingbird board Wills Wang
2014-08-19 10:33 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408433581-14417-1-git-send-email-wills.wang.open@gmail.com \
--to=wills.wang.open@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).